FACULTY OF ENGINEERING KRAGUJEVAC
UNIVERSITY KRAGUJEVAC
CURRICULUM VITAE
Bogdan Nedić

GENERAL INFORMATION
First and last nameBogdan Nedić
Year and place of birth02.01.1959. Gornji Milanovac
PositionFull professor
E-mailnedic@kg.ac.rs
Education-scientific / education–art fieldTechnical technological sciences
University, faculty, organizational unitFaculty of engineering, University of Kragujevac
Field and closer specialtyMechanical engineering, production engineering

TECHNICAL BIOGRAPHY – POSITIONS
YearInstitutionPosition
1986Research & teaching assistant
1992Research & teaching assistant
1999Assistant professor
2003Associate professor
2009Full professor

PROFESSIONAL BIOGRAPHY - IMPROVEMENTS
YearInstitutionDuration
1988

AWARDS AND RECOGNITIONS
YearName of award/recognition
2015Charter & Plaque "Pavle Stankovic"

RESULTS OF SCIENTIFIC AND RESEARCH WORK
Papers published in international scientific journals
  1. Dalibor Petković, Srđan Jovic, Obrad Anicic. Bogdan Nedić, Branko Pejović, Analyzing of flexible gripper by computational intelligence approach, Mechatronics, Vol.40, No.December 2016, pp. 1-16, ISSN 0957-4158, Doi http://dx.doi.org/10.1016/j.mechatronics.2016.09.001, 2016
  2. Srđan Jović, Obrad Aničić. Mladen Marsenić, Bogdan Nedić, Solar radiation analyzing by neuro-fuzzy approach, Energy and Buildings, Vol.129, No.2016, pp. 261-263, ISSN 0378-7788, Doi http://dx.doi.org/10.1016/j.enbuild.2016.08.020, 2016
  3. Obrad Anicic, Srđan Jović, Hivzo Skrijelj, Bogdan Nedić, Prediction of laser cutting heat affected zone by extreme learning machine, Optics and Lasers in Engineering, Vol.88, No.Januar 2017, pp. 1-4, ISSN 0143-8166, Doi http://dx.doi.org/10.1016/j.optlaseng.2016.07.005, 2017
  4. Lazarevic Dragan D, Nedic Bogdan P, Jovic Srdjan, Sarkocevic Zivce S, Blagojevic Milan R, Optical inspection of cutting parts by 3D scanning, PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS, impact factor: 21, Vol.531, No.Article 121583, pp. -, ISSN 0378-4371, Doi https://doi.org/10.1016/j.physa.2019.121583, 2019
  5. Bogdan Nedić, Milan Erić, Cutting temperature measurement and material machinability, Thermal Science, Vol.18, No.Suppl. 1, pp. S259-S268, ISSN 0354-9836, Doi 10.2298/TSCI120719003N, 2014
  6. Obrad Aničić, Srđan Jović, Danilo Aksić, Aleksandar Skulić, Bogdan Nedić, Machining process influence on the chip form and surface roughtness by neuro-fuzzy technique, Applied Physics A, Materials Science & Processing, Vol.123, No.4, pp. 1-9, ISSN 0947-8396, Doi DOI 10.1007/s00339-017-0915-4, 123:284, 2017
  7. Mirfad R. Tarić, Pavel P. Kovač, Bogdan P. Nedić, Dragan Đ. Rodić, Dušan D. Ješić, MONITORING AND NEURAL NETWORK MODELING OF CUTTING TEMPERATURE DURING TURNING HARD STEEL, Thermal Science, Vol.22, No.6A, pp. 2605-2614, ISSN 2334-7163, 2018
  8. Radovan H. Nikolić, Miroslav Lučić, Bogdan Nedić, Miroslav R. Radovanović, CALCULATION OF TEMPERATURE FIELDS DURING LATHE MACHINING WITH THERMOELECTRIC COOLING BY USING THE FINITE ELEMENT METHOD, Thermal Science, Online-first, Vol.2018-09-22, No.1, pp. 1-12, ISSN 2334-7163, Doi https://doi.org/10.2298/TSCI170518197N, 2018
  9. Nikolic Radovan H, Lucic Miroslav V, Nedic Bogdan P., Radovanovic Miroslav R., Calculation of Temperature Fields During Lathe Machining with Thermoelectrical Cooling by Using the Finite Element Method, THERMAL SCIENCE, impact factor: 22, Vol.23, No.3, pp. 1889-1899, ISSN 0354-9836, Doi https://doi.org/10.2298/TSCI170518197N, 2019
  10. Марушић, В., Витез, И., Недић, Б., Abrasive wear resistance of glass fiber reinforced polyester laminates, Metalurgija, Vol.47, No.4, pp. 285-356, ISSN 0543-5846, 2008
  11. Marušić, V., Nedić, B., Stoić, A., Application of tribometer Measurements for Evaluation of machinability, Strojarstvo, Vol.51, No.4, pp. 365-370, ISSN 0562-1887, 2009
  12. Nedić Bogdan, Perić Sreten, Monitoring Oil for Lubrication of Tribomechanical Engine Assemblies, Journal of the Balkan Tribological Association, Vol.16, No.2, pp. 242-257, ISSN 1310-4772, Doi http://scibulcom.net/jbtar.php?gd=2010&bk=2, 2010
  13. Lakić Globočki Gordana, Branislav Sredanović, Nedić Bogdan, Čiča Đorđe, Ćatić Dobrivoje, Development of Matematical Model of Universal Material Machinability, Journal of the Balkan Tribological Association, Vol.17, No.Book 4, pp. 501-511, ISSN 1310-4772, 2011
  14. Bogdan Nedić, Sreten Perić, Dragan Trifković, Monitoring physical and chemical properties of engine oil, Journal of the Balkan Tribological Association, Vol.19, No.4, pp. 648-660, ISSN 1310-4772, 2013
  15. Peric Sreten Nedic Bogdan P Trifkovic Dragan Vuruna Mladen M, An Experimental Study of the Tribological Characteristics of Engine and Gear Transmission Oils, STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, Vol.59, No.7-8, pp. 443-450, ISSN 0039-2480, Doi 10.5545/sv-jme.2012.870, 2013
  16. Predrag Janković, Miroslav Radovanović, Jelena Baralić, Bogdan Nedić, Prediction model of surface roughness in abrasive water jet cutting of aluminium alloy, Journal of the Balkan Tribological Association, Vol.19, No.4, pp. 618-628, ISSN 1310-4772, 2013
  17. Sreten Perić, Bogdan Nedić, Dragan Trifković, Mladen Vuruna, An experimental study of the tribological characteristics of engine and gear transmission oils, Strojniški vesnik, Vol.59, No.7-8, pp. 443-450, ISSN 0039-2480, Doi 10.5545/sv-jme.2012.870, 2013
  18. Vlatko Marušić, Jelena Baralić, Bogdan Nedić, Željko Rosandić, Effect of machining parameters on jet lagging in abrasive water jet cutting, Tehnički vjesnik, Vol.20, No.4, pp. 677-682, ISSN 1330-3651, 2013
  19. Miodrag Hadžistevic, Ivan Matin, Janko Hodolic, Djordje Vukelic, Srdjan Vukmirovic, Damir Godec, Bogdan Nedic, Rule base reasoning in the knowledge-based mould design system, Tehnički vjesnik, TECHNICAL GAZETTE, Vol.21, No.5, pp. 1143-1148, ISSN 1330-3651, 2014
  20. Sreten Perić, Bogdan Nedić, Dragan Trifković, Ranko Antunović, Experimental Research of the Physical-Chemical and Tribological Properties of Engine Oils, Journal of the Balkan Tribological Association, Vol.20, No.4, pp. 639-657, ISSN 1310-4772, 2014
  21. Miloš Madić, Miroslav Radovanović, Bogdan Nedić, Vlatko Marušić, MULTI-OBJECTIVE OPTIMIZATION OF CUT QUALITY CHARACTERISTICS IN CO2 LASER CUTTING OF STAINLESS STEEL, Technical gazette (Tehnički vjesnik), Vol.22, No.4, pp. 709-713, ISSN 1330-3651, 2015
  22. D. JOVANOVICa, B. NEDICb*, SCRATCH TEST OF CHROMIUM COATINGS, Journal of the Balkan Tribological Association, Vol.22, No.3, pp. 2133-2142, ISSN 1310-4772, 2016
  23. Dragan Lazarević, Bogdan Nedić, Vlatko Marušić, Milan Mišić, Živče Šarkoćević, REGENERATING THE NC CODE IN ORDER TO IMPROVE THE SURFACE QUALITY, Tehnički vjesnik/Technical Gazette, Vol.24, No.2, pp. 355-362, ISSN 1848-6339, Doi 10.17559/TV-20161018122324, 2017
  24. Anicic Obrad, Jovic Srdjan, Stanojevic Nenad, Marsenic Mladen, Pejovic Branko, Nedic P. Bogdan, ESTIMATION OF TOOL WEAR ACCORDING TO CUTTING FORCES DURING MACHINING PROCEDURE, SENSOR REVIEW, SENSOR REVIEW, Vol.38, No.2, pp. 176-180, ISSN 0260-2288, 2018
  25. Peko Ivan, Nedic P. Bogdan, Djordjevic Aleksandar, Veza Ivica, MODELLING OF KERF WIDTH IN PLASMA JET METAL CUTTING PROCESS USING ANN APPROACH, TEHNICKI VJESNIK-TECHNICAL GAZETTE, Vol.25, No.2, pp. 401-406, ISSN 1330-3651, 2018
  26. Ivan PEKO, Bogdan NEDIĆ, Marko DUNĐER, Ivan SAMARDŽIĆ, Modelling of Dross Height in Plasma Jet Cutting Process of Aluminium Alloy 5083 Using Fuzzy Logic Technique, Tehnički vjesnik/Technical Gazette, Vol.27, No.6, pp. 1767-1773, ISSN 1330-3651, 2020
  27. Miroslav Lučić, Bogdan Nedić, Vlatko Marušić, Jelena Baralić, Anđelija Mitrović, Numerical analysis of the temperature field in the cutting zone in of continuous and discontinuous metal cutting by turning, Technical Gazette, Vol.27, No.5, pp. 1486-1491, ISSN 1330-3651, Doi https://doi.org/10.17559/TV-20190612173031, 2020
  28. Vlatko MARUŠIĆ, Srbislav ALEKSANDROVIĆ, Bogdan NEDIĆ, Andrijana MILINOVIĆ, Investigation of the Impact of Hot Forming the Properties of Seamless Steel Bottles for Liquefied Gases, Tehnički vjesnik/Technical Gazette, Vol.27, No.3, pp. 1025-1030, ISSN 1330-3651, 2020
  29. Miloš Madić, Miroslav Radovanović, Bogdan Nedić, Correlation Between Surface Roughness Characteristics in CO2 Laser Cutting of Mild Steel, Tribology in Industry, Vol.34, No.4, pp. 232-238, ISSN 0354-8996, 2012
  30. Sreten Perić, Bogdan Nedić, Monitoring Lubricant Performance in Field Application, Tribology in Industry, Vol.34, No.2, pp. 92-100, ISSN 0354-8996, 2012
  31. Aleksandar Vencl, B. Gligorijević, B. Katavić, Bogdan Nedić, Dragan Džunić, Abrasive wear resistance of the iron and WC based hardfaced coatings evaluated with scratch test method, Tribology in industry, Vol.35, No.2, pp. 123-127, ISSN 0354-8996, 2013
  32. Gordana Globočki Lakić, Branislav Sredanović, Damir Kramer, Bogdan Nedić, Janez Kopač, Experimental research using of MQL in metal cutting, Tribology in industry, Vol.35, No.4, pp. 276-285, ISSN 0354-8996, 2013
  33. Miloš Madić, Miroslav Radovanović, Bogdan Nedić, Modeling and Simulated annealing optimization of surface roughness in CO2 laser nitrogen cutting of stainless steel, tribology in industry, Vol.35, No.3, pp. 167176, ISSN 0354-8996, 2013
  34. Sreten Perić, Bogdan Nedić, Aleksandar Grkić, Applicative Monitoring of Vehicles Engine Oil, Tribology in Industry, Vol.39, No.3, pp. 308-315, ISSN 0345-8996, 2014
  35. M. Madić, M. Radovanović, D. Petković, B. Nedić, Multi-Criteria Analysis of Laser Cut Surface Characteristics in CO2 Laser Cutting of Stainless Steel, Tribology in Industry, Vol.37, No.2, pp. 236-243, ISSN 0354-8996, Doi http://www.tribology.fink.rs/journals/2015/2015-2/12.pdf, 2015
  36. Bogdan Nedić, Milan Erić, Marijana Aleksijević, Calculation of laser cutting costs, International Journal for Quality Research, Vol.10, No.3, pp. 487-494, ISSN 1800-6450, Doi DOI: 10.18421/IJQR10.03-03, 2016
  37. Ivan Peko, Bogdan Nedić, Aleksandar Đorđević, Dragan Džunić, Marko Janković, Ivica Veža, Modeling of Surface Roughness in Plasma Jet Cutting Process of Thick Structural Steel, Tribology in Industry, Vol.4, No.38, pp. 552-559, ISSN 0354-8996, Doi http://www.tribology.fink.rs/journals/2016/2016-4/9.pdf, 2016
  38. Vlatko Marušić, Ivan Opačak, Bogdan Nedić, Desimir Jovanović, Goran Rozing, Investigation of the Tribological Characteristics of the Stainless Steel X20Cr13, International Journal for Science and Innovations for the Industry - Innovations in discrete productions, Vol.2, No.2/2016, pp. 39-41, ISSN 1314-8907, Doi http://stumejournals.com/innovations/archive/2016/2-2016.pdf, 2016
  39. A. Ðordević, D. Jovanović, B. Nedić, D. Lukić, M. Stefanović, M. Erić, EXPERTS SYSTEM BASED ON THE NEURAL NETWORK AND MOBILE DATABASE IN THE FIELD GALVANIC METAL COATING, Tribology in industry, Vol.40, No.4, pp. 574-583, ISSN 0654-8996, 2018
  40. Ivan Peko, Petar Ljumović, Bogdan Nedić, Marko Dunđer, Analysis of the heat affected zone in plasma jet cutting process of the aluminium alloy EN AW 5083, Zastita materijala, impact factor: 24, Vol.60, No.2, pp. 174-181, ISSN 0351-9465, 2019
Papers presented at international conferences
  1. Nedić, B., Ćirić, R., Đukić, V., Izbor rešenja zavarivanja trenjem čelika 60 i SW7M, I Sympozjum, Stopy železa odporne na šcieranie, Krakow, 1984
  2. Ćetković, M., Nedić, B., Analisys of the dealing with cooling and lubrication means in the trucks' industry, Balkantrib '93, Sofija, 1993
  3. Nedić, B., Đorđević, Z., Karović, D., Extension of possibilities for application of the measuring system 'Talysurf-6' for analysis of surface microgeometry by connection to a computer, Balcantrib '93, Sofija, 1993
  4. Nedić, B., Tadić, B., Đorđević, Z., Babić, M., Some results of investigations of the influence of the tool wear on cutting resistance and quality of the machined surface, Intertribo '93, Bratislava, 1993
  5. Tadić, B., Nedić, B., Jeremić, B., Babić, M., Milić, N., Tribo-economical characteristic sindicator of elements reliability by progressive failure of technical systems, Intertribo '93, Bratislava, 1993
  6. Ječmenica, R., Ivković, B., Nedić, B.;, Possible trends of increasing production by application of modern cutting tools, Eurometalworking 94, Milano, 1994
  7. Nedić, B., Ječmenica, R,, Some aspects of coated cutting tools, IV International Symposium INSYCONT '94, Krakov, 1994
  8. Nedić, B., Ječmenica, R., Development of method for monitornig and control of machining by cutting process, Eurometalworking 94, Milano, 1994
  9. Nedić, B., Ječmenica, R., Drobnjak, V,, Some aspects of coated cutting tools, International tribology conference ITC '95, Yokohama, Japan, 1995
  10. Ječmenica, R., Nedić, B., Perspektives of applications of the cutting tools made of silicon nitride keramics, VIth International Symposium INTERTRIBO '96, Vysoke Tatry, Slovak Republic, 1996
  11. Ječmenica, R., Nedić, B., Perspectives of applications of cutting tools made of silicon nitride ceramics for the purpose of machining process efficiency in crease, International Conference on Tribology BALKANTRIB '96, Thessaloniki, Greece, 1996
  12. Nedić, B., Đorđević, Z., Ječmenica, R., Note on development of formed cutting tool's automatic construction using AutoCAD and C++, IX International conference on tools, Miskolc, 1996
  13. Nedić, B., Ječmenica, R., Some results of the cutting process dynamic characteristics investigation, VIth International Symposium INTERTRIBO '96, Vysoke Tatry, Slovak Republic, 1996
  14. Nedić, B., Radovanović, M., Ćirić, R., Influence of the various drill nitrating methods at their lifetime, International Conference on Tribology BALKANTRIB '96, Thessaloniki, Greece, 1996
  15. Tadić, B., Nedić, B., Ćetković, M., Sremčević, N., Influence of tribometer constructive solutions on friction force measurements reliability, International Conference on Tribology BALKANTRIB '96, Thessaloniki, Greece, 1996
  16. Nedić, B., Analysis of Dynamic Behavior of Tools in Metal Turning, First World Tribology Congress, London, 1997
  17. Ivković, B., Ješić, I., Nedić, B., Comparative Tribological Test of Austempered Ductile Iron and Steel in Contact With Gray Iron, Balkantrib '99, Ploiesti, Romania, 1999
  18. Ivković, B., Nedić, B., Tribological Properties of Neat Oil and Machining Cost, INTERTRIB '99, Visoke Tatre, Slovakia, 1999
  19. Ivković, B., Nedić, B., Some Results of Cutting Process Simulation on "Block on Disk" Tribometer, 5. International Conference on Advanced Mechanical Engineering & Technology, AMTECH '99, Plovdil, Bugarska, 1999
  20. Ivković, B., Todorović, P., Nedić, B., Development of System for Signal Acquisition for Tribological Investigations on the TPD-95C Tribometer, 5. International Conference on Advanced Mechanical Engineering & Technology, AMTECH '99, Plovdil, Bugarska, 1999
  21. Jovanović, M., Lazić, V., Josifović, D., Adamović, D., Nedić, B., Nedić, V., Optimization of the Hard Facing Process of Forging Dies from the Aspect of Tribological Characteristics, 5. International Conference on Advanced Mechanical Engineering & Technology, AMTECH '99, Plovdil, Bugarska, 1999
  22. Nedić, B. Radovanović, M., Ječmenica, R., Ćirić, R., Metallographic and Tribological Characteristics of the Cutting Tools Nitrided Layers, International Conference "The Coatings", Thessaloniki, Greece, 1999
  23. Nedić, B., Ivković, B., Ječmenica, R., Development of monitoring system of the metal cutting process based on dynamic characteristics of the process parameters, Balkantrib '99, Ploiesti, Romania, 1999
  24. Nedić, B., Radovanović, M., Ječmenica, R., Ćirić, R., Influence of the Nitriding Procedures on Metallographic and Tribological Characteristics of the Cutting Tools Nitrided Layers, VII International Symposium INTERTRIBO '99, Stara Lesna, Slovak Republic, 1999
  25. Dašić, P., Radonjić, S., Ječmenica, R., Nedić, B., Research of the regression functional of processed surface roughness at the turning by means of modern cutting tools, X International conference on Tools, Miskolc, Hungary, 2000
  26. Nedić, B., Kaplarević, M., Development of assembly accessories for clamping in joint technologies, X International conference on Tools, Miskolc, Hungary, 2000
  27. Nedić, B., Lazić, V., Tribological characteristics of the forging dies hard faces, ITC, Nagasaki Japan, 2000
  28. Srećković, M., Gospavić, R., Dinulović, M., Bojanić, S., Nedić, B., Mijatović. N., Modelling in area of laser interaction and crater description, Lasers 2000, Int&fl Conference, Albuquerque, 2000, December 4-8
  29. Ивковић, Б., Недић, Б., Јешић, Д., Scratch test - мерење абразивне отпорности материјала и квалитета превлака, IV Међународно савјетовање ДЕМИ 2001, Бања Лука, 2001
  30. Nedić, B., Pešić, Z., Ćetković, M., Vesić, N., Possibility of application of tribometric investigations in diagnostics motor vehicles transmissions, Balkantrib '02, Kayseri, Turkey, 2002
  31. Лакић Глобочки, Г., Недић, Б., Ивковић, Б., Испитивање триболошких карактеристика СХП при обради алуминијума симулацијом процеса резања на трибометру, ДЕМИ 2002, Бањалука, 2002
  32. Josifović, D., Nedić, B., Ćirić, R., Marković. S., Selection of gears materials based on considerations of wear, damages and regeneration, International conference "Power transmissions 03", Slaveniantrib, Slovakia, 2003
  33. Ječmenica, R., Ivković, B., Nedić, B., Possible trends of increasing production by application of modern cutting tools, Conference Eurometalworking 94, Study of metal cutting and forming processes, Удине, Италија, 2004
  34. Nedić, B., Ječmenica, R., Development of method for monitoring and control of machining by cutting process, Conference Eurometalworking 94, Study of metal cutting and forming processes, Удине, Италија, 2004
  35. Vukadinović, Z., Josifović, D., Nedić, B., Test oin effects of oil quality to motor cars synchromesh gearboxes, Slotrib 04, Conference on Fuels, Tribology and Ecology, Radenci, Slovenija, 2004
  36. Митровић, С., Недић, Б.,, Virtual Simulation of a Guiding Systems for Eccentrically Loaded Slide Ways, Scientific Conference with international Participation Manufacturing and Management in 21.st Century, Охрид, 2004
  37. Lakić-Globočki, G., Nedić, B., Golubović-Bugarski, V., Application of "Block on Disk" tribometer in researching materials workability, Balkantrib 05, 5th International conference on tribology, Kragujevac, 2005
  38. Nedić, B., Kaplarević, M., Flexible tool for positionoing and clamping the assemblz the car-body and other complex three dimensional forms, The Fifth International Conference Heavy Machinery HM 2005, Kraljevo, 2005
  39. Nedić, B., Lakić Globočki, G., Results of measurement of friction coefficient between al alloys and tool materials, 2nd International Conference on Manufacturing Engineering ICMEN, Kallithea of Chalkidiki, Greece, 2005
  40. Nedić, B., Vesić, N., Ćetković, M., Dinamics characteristics of metal cutting process, Balkantrib 05, 5th International conference on tribology, Kragujevac, 2005
  41. Vesić, N., Nedić, B., Colorimetric characteristics of the light equipment in the automobile industry, Balkantrib 05, 5th International conference on tribology, Kragujevac, 2005
  42. Лакић-Глобочки, Г., Недић, Б., Дакић, П., Резултати мјерења триболошких карактеристика Ал - легуре на трибометру "Block on disk", ДЕМИ 05, VII Међународни научно стручни скуп о достигнућима електро и машинске индустрије, Бања Лука, 2005
  43. Globočki Lakić, G., Nedić, B., Ivković, B., Golubović Bugarski, V., Čiča, Đ., Possibility of Determination of Material Machinability Over Tribological Parameters by Use of Tribometer "Block on Disk", 9th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia, 2006
  44. Nedić, B., Globočki-Lakić G., Some results experimental test friction and wear between al alloys and tool materials, 10th International Conference on Tribology, Serbiantrib 07, Kragujevac, 2007
  45. Јовановић, Д., Недић Б., Могућност побољшања триболошких својстава унутрашње трасе цеви стрељачког оружја, ДЕМИ 2007, 8. Међународно саветовање о достигнућима из електротрехнике, машинства и информатике, Бања Лука, 2007
  46. Баралић, Ј., Радоњић, С., Недић, Б., Influence of focusing tibe wear on the cut-surface quality, 12th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2008, Istanbul, Turkey, 2008
  47. Перић, С., Вуруна, М., Недић, Б., Пешић, З., Contribution to diagnostics of technical condition tribology assemblities transmitters of vehicles, Balkantrib 08, Sozopol, Bulgaria, 2008
  48. Nedić Bogdan, Specific of CRT Recycling, 18. International Scientific and Professional Meeting "ECOLOGICAL TRUTH" Eco-Ist 10, Apatin, 2010, 01.-04.06.2010., pp. 1-6, ISBN -
  49. Baralić Jelena, Nedić Bogdan, Janković Predrag, The traverse Speed Influence on Surface Roughness in Abrasive Waterjet Cutting Applications, 12TH International Conference on Tribology, SERBIANTRIB 11, Kragujevac, 2011, 11-13.05.2011, pp. 349-353, ISBN 978-86-86663-74-0
  50. Baralić Jelena, Nedić Bogdan, Janković Predrag, Machining Parameters Effect on the Jet Retardation in Abrasive Water Jet Machining, 34TH International Conference on Production Engineering, Niš, 2011, 28-30. septembar, 2011, pp. 443-446, ISBN 978-86-6055-019-6
  51. Čupović Milomir, Jovanović Desimir, Nedić Bogdan, FTA and FMEA in Predicting Incidental Conditions in Cable Cars and Ski Lifts, 10th Anniversary International conference on Accomplisments in Electrical and Mechanical Engineering and Information Technology, DEMI 2011, Banja Luka, RS. BiH, 2011, 26-28. maj, 2011, pp. 961-966, ISBN 978-99938-39-36-1
  52. Jovanović Desimir, Nedić Bogdan, Čupović Milomir, Influence of the Profile Shape of barrel on Work Properties of Small arms, The 7th International Scientific Conference Research and Development of Mechanical Elements and Systems, IRMES 2011, Niš, 2011, 27-28. april, 2011, pp. 525-528, ISBN 978-86-6055-012-7
  53. Nedić Bogdan, Baralić Jelena, Radovanović Miroslav, The Complexity of Defining the Quality of Laser Cutting, 34TH International Conference on Production Engineering, Niš, 2011, 28-30. septembar, 2011, pp. 439-442, ISBN 978-86-6055-019-6
  54. Nedić Bogdan, Jovanović Desimir, Čupović Milomir, Polymers and Health, 5th International Quality Conference, Kragujevac, 2011, 19-21. maj, 2011, pp. 603-610, ISBN 978-86-86663-68-9
  55. Nedić Bogdan, Jovanović Desimir, Lakić Globočki Gordana, Scratch Testing of Zn Coating surfaces, 34TH International Conference on Production Engineering, Niš, 2011, 28-30. septembar, 2011, pp. 87-90, ISBN 978-86-6055-019-6
  56. Nedić Bogdan, Jovanović Desimir, Lakić Globočki Gordana, Influence of Previous Machining on Characteristics of Galvanic Coatings, 12TH International Conference on Tribology, SERBIANTRIB 11, Kragujevac, 2011, 11.-13.05.2011, pp. 146-151, ISBN ISBN 978-86-7892-419-4
  57. Nedić Bogdan, Lakić Globočki Gordana, Development model for control metal cutting process, 10th Anniversary International conference on Accomplisments in Electrical and Mechanical Engineering and Information Technology, DEMI 2011, Banja Luka, RS. BiH, 2011, 26-28. maj, 2011, pp. 309-314, ISBN 978-99938-39-36-1
  58. Perić Sreten, Nedić Bogdan, Dakić Pantelija, Possibility of Application of Tribometric Investigations in Diagnostics Tribology Assemblies of Vehicles, 7TH International Conference on Tribology Balkantrib‚11, Thessaloniki, Greece, 2011, 02-04. oktobar, 2011, pp. 283-292, ISBN ISBN 978-960-98780-6-7
  59. Baralić Jelena, Bogdan Nedić, The effect of abrasive water jet cutting parameters on kerf geometry, 11th International Scientific Conference MMA2012, Novi Sad, 2012, 20.-21. Septembar, 2012, pp. 01-04, ISBN 978-86-7892-419-4
  60. Bogdan Nedić, Desimir Jovanović, Vlatko Marušić, Some scratch test research results Zn coatings, 11th International Scientific Conference MMA 2012, Novi Sad, 2012, 20.-21. Septembar, 2012, pp. 463-466, ISBN 978-86-7892-419-4
  61. Aleksandar Vencl, Bojan Gligorijević, Boris Katavić, Bogdan Nedić, Dragan Džunić, Abrasive wear resistance of the iron- and WC-based hardfaced coatings evaluated with scratch test method, Serbiatrib-13, Kragujevac, 2013, 15.-17-05.2013., pp. 75-79
  62. Bogdan Nedić, Desimir Jovanović, Milomir Čupović, Characteristics of Chromium coating in pregrammed current regine, 35th International conference on production engineering, Kraljevo, Kopaonik, 2013, 25.-28.09.2013., pp. 163-166, ISBN 978-86-82631-69-9
  63. Bogdan Nedić, Marko Janković, Miroslav Radovanović, Gordana Lakić Globočki, An investigation of quality in plasma cutting, DEMI 2013, Banja Luka, RS, BiH, 2013, 30.05.-01.06.2013., pp. 275-282
  64. Bogdan Nedić, Marko Janković, Miroslav Radovanović, Gordana Lakić Globočki, Quality of plasma cutting, Serbiatrib-13, Kragujevac, 2013, 15.-17.05.2013., pp. 314-319
  65. Gordana Lakić Globočki, Branislav Sredanović, Davorin Kramar, Bogdan Nedić, Janez Kopač, Experimental research using of MQL in metal cutting, Serbiatrib-13, Kragujevac, 2013, 15.-17.05.2013., pp. 292-301
  66. Ivan Matin, Janko Hodolič, Miodrag Hadzistević, Borđe Vukelić, Bogdan Nedić, Damir Godec, A review of research, issues and approaches for mold design software development, 35th International conference on production engineering, Kraljevo, Kopaonik, 2013, 25.-28.09.2013., pp. 35-39, ISBN 978-86-82631-69-9
  67. Jelena Baralić, Bogdan Nedić, Predrag Janković, Effect of traverse speed and operating pressure on surface roughness in AWJ machining, 35th International conference on production engineering, Kraljevo, Kopaonik, 2013, 25.-28.09.2013., pp. 137-140, ISBN 978-86-82631-69-9
  68. Jelena Baralić, Predrag Janković, Bogdan Nedić, The waviness of an abrasive water jet generated surface, Serbiatrib-13, Kragujevac, 2013, 15.-17.05.2013., pp. 217-221
  69. Perić Sreten, Bogdan Nedić, Aleksandar Grkić, Applicative monitoring of vehicles engine oil, Serbiatrib-13, Kragujevac, 2013, 15.-17.05.2013., pp. 240-246
  70. Baralić, J., Nedić, B., THE INFLUENCE OF ABRASIVE WATER JET PROCESSING PARAMETERS ON REACTION FORCE, 12th INTERNATIONAL SCIENTIFIC CONFERENCE MMA 2015 - FLEXIBLE TECHNOLOGIES, Fakultet tehničkih nauka, Novi Sad, 2015, 25-26.09.2015., pp. 25-28, ISBN 978-86-7892-722-5
  71. Bogdan Dimitrijević, Bogdan Nedić, THE USE OF MODULAR (FLEXIBLE) FIXTURING ELEMENTS FOR THE PURPOSE OF MANUFACTURING FORMULA STUDENT CHASSIS, Quality Festival 2015, 9 International quality conference, Kragujevac, 2015, 04-06.06.2015., pp. 627-632, ISBN 978-86-6335-015-1
  72. Bogdan Nedić, Marko Janković, Milan Erić, Gordana G. Lakić, Branislav Sredanović, SPECIFICS OF THE DESIGN FOR CNC PLASMA CUTTING, 12. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology, DEMI 2015, Mašinski fakultet, Banja Luka, RS, BiH, 2015, 29-30.05.2015., pp. 241-248, ISBN 978-99938-39-53-8
  73. Dragan LAZAREVIC, Bogdan NEDIC, Miroslav RADOVANOVIC, 5-Axis Machine Tools, Configurations, Accuracy and Geometric Error Model, The 3rd International Conference "Mechanical Engineering in XXI Century", Mašinski fakultet, Niš, 2015, 17-18.09.2015., pp. 363-366, ISBN 978-86-6055-072-1
  74. Lazarević, D., Nedić, B., MEASUREMENT TECHNOLOGIES AND MACHINING ERRORS, 12th INTERNATIONAL SCIENTIFIC CONFERENCE MMA 2015 - FLEXIBLE TECHNOLOGIES, Fakultet tehničkih nauka, Novi Sad, 2015, 25-26.09.2015., pp. 47-50, ISBN 978-86-7892-722-5
  75. Marko Janković, Bogdan Nedić, Milan Erić, Bratislav Trifunović, COMPUTER TOOLS OF CNC PLASMA CUTTING, Quality Festival 2015, 9 International quality conference, Kragujevac, 2015, 04-06.06.2015., pp. 211-218, ISBN 978-86-6335-015-1
  76. Predrag Janković, Miroslav Radovanović, Jelena Baralić, Bogdan Nedić, Topography of Surface Machined by Abrasive Water Jet Cutting, The 3rd International Conference "Mechanical Engineering in XXI Century", Mašinski fakultet, Niš, 2015, 17-18.09.2015., pp. 383-386, ISBN 978-86-6055-072-1
  77. S. Peric, B. Nedic, M. Vuruna, M. Stoiljkovic, Physical and chemical properties of the biodegradable universal tractor oil based on the vegetable oils, Serbiatrib 2015, Mašinski fakultet, Beograd, 2015, 13.-15.05.2015., pp. 198-202, ISBN 978-86-7083-857-4
  78. Nedic Bogdan, Janković Marko, Understanding plasma spraying process and application in defense industry, 7th International Scientific Conference on Defensive Technologies OTEH2016, Beograd, 2016, 06.-07.10.2016., pp. 671-677, ISBN 978-86-81123-82-9
  79. Sreten Perić, Bogdan Nedić, Experimental investigation of oils in four-stroke engines, 7th International Scientific Conference on Defensive Technologies OTEH2016, Beograd, 2016, 06.-07.10.2016., pp. 205-210, ISBN 978-86-81123-82-9
  80. Vlatko Marušić, Ivan Opačak, Bogdan Nedić, Desimir Jovanović, Goran Rozing, Investigation of the Tribological Characteristics of the Stainless Steel X20Cr13, II International Scientific Congress INNOVATIONS IN ENGINEERING 2016, Varna, Bugarska, 2016, 20.-23.06.2016., pp. 26-28, ISBN 1310-3946
  81. B. Nedić, M. Janković, I. Peko, SURFACE ROUGHNESS ANALYSIS AT PLASMA CUTTING, 15th International Conference on Tribology SERBIATRIB ‘17, Kragujevac, 2017, 17.05.-19.05.2017., pp. 366-370, ISBN 978-86-6335-041-0
  82. Bogdan Nedić, Marko Janković, Ivan Peko, Electrode Investigation at Plasma Cutting, IX International Conference “Heavy Machinery-HM 2017”, Zlatibor, 2017, 28.06.-01.07.2017., pp. B19-B22, ISBN 978-86-82631-89-7
  83. I. Peko, B. Nedić, A. Đorđević, S. Đurić, D. Džunić, I. Veža, M. Janković, PREDICTION OF SURFACE ROUGHNESS IN PLASMA JET CUTTING PROCESS USING NEURAL NETWORK MODEL, 15th International Conference on Tribology SERBIATRIB ‘17, Kragujevac, 2017, 17.05.-19.05.2017., pp. 520-525, ISBN 978-86-6335-041-0
  84. S. Peric, M. Stoilkovic, B. Nedic, M. Bucko, THE INVESTIGATION OF THE BIODEGRADABLE UNIVERSAL TRACTOR OIL, 15th International Conference on Tribology SERBIATRIB ‘17, Kragujevac, 2017, 17.05.-19.05.2017., pp. 424-434, ISBN 978-86-6335-041-0
  85. Ž. Aleksić, P. Kovač, B. Nedić, D. Ješić, INVESTIGATION OF TRIBOLOGICAL CHARACTERISTICS OF THE SAMPLES TAKEN FROM VALVE ON GAS PIPELINE SYSTEM J.P. ”SERBIAGAS”, 15th International Conference on Tribology SERBIATRIB ‘17, Kragujevac, 2017, 17.05.-19.05.2017., pp. 239-243, ISBN 978-86-6335-041-0
  86. B. Nedić, J. Baralić, S. Đurić, CUTTING SPEED AND LASER POWER INFLUENCE ON MACINED SURFACE ROUGHNESS AND DEPTH OF THE LASER MILLING, 37th International Conference on Production Engineering of Serbia, Kragujevac, 2018, 25.10.-26.10.2018., pp. 253-258, ISBN 978-86-6335-057-1
  87. Dragan Lazarević, Bogdan Nedić, Živče Šarkoćević, Ivica Čamagić, Jasmina Dedić, RAZVOJ OPTIČKOG SISTEMA ZA ON-MACHINE INSPEKCIJU DELOVA DOBIJENIH MAŠINSKOM OBRADOM, 4th International scientific conference, COMETa 2018, Jahorina, Republic of Srpska, BiH, 2018, 27.11.-30.11.2018., pp. 203-210, ISBN 978-99976-719-4-3
  88. S. Đurić, B. Nedić, J. Baralić, J. Bogdanov, A. Miljković, RESEARCHING THE POSSIBILITY OF APPLYING ABRASIVE WATERJET IN PROJECTILE DISASSEMBLY PROCESS, 8th International Scientific Conference on Defensive Technologies, OTEH 2018, Beograd, 2018, 11.10.-12.10.2018., pp. 200-204, ISBN 978-8681123-88-1
  89. S. Đurić,, D. Adamović, B. Nedić, B. Trifunović, D. Jovanović, MATERIAL SELECTION OF PROTECTIVE COATINGS, 37th International Conference on Production Engineering of Serbia, Kragujevac, 2018, 25.10.-26.10.2018., pp. 69-74, ISBN 978-86-6335-057-1
  90. Sreten Perić, Bogdan Nedić, Mile Stoiljković, Radovan Radovanović, EXPERIMENTAL RESEARCH OF THE BIODEGRADABLE UNIVERSAL TRACTOR OIL BASED ON THE VEGETABLE OILS, International Congress Motor Vehicles & Motors 2018, Kragujevac, 2018, 04.10.-05.10.2018., pp. 101-113, ISBN 978-86-6335-055-7
  91. Bogdan Nedić, GARTNER'S TOP STRATEGIC TECHNOLOGY TRENDS, 13. International Quality Conference, Kragujevac, 2019, 29,05-01,06,2019., pp. 433-442, ISBN 978-86-6335-059-5
  92. Bogdan NEDIĆ, Lazar SLAVKOVIĆ, Stefan ĐURIĆ, Dragan ADAMOVIĆ, Slobodan MITROVIĆ, SURFACE ROUGHNESS QUALITY, FRICTION AND WEAR OF PARTS OBTAINED ON 3D PRINTER, 16th International Conference on Tribology, SERBIATRIB'19, Kragujevac, 2019, 15-17,05,2019,, pp. 98-103, ISBN 2620-2832
  93. Desimir Jovanović, Bogdan NEDIĆ, Jelena BARALIĆ, SURFACE BASE EFFECTS ON ZINC COATING CHARACTERISTICS, 16th International Conference on Tribology, SERBIATRIB'19, Kragujevac, 2019, 15-17,05,2019,, pp. 259-264, ISBN 2620-2832
  94. Dragan ADAMOVIĆ, Jelena ŽIVKOVIĆ, Bogdan NEDIĆ, Fatima ŽIVIĆ, Slobodan MITROVIĆ, Miroslav ŽIVKOVIĆ, ANALYSIS OF THE PROCESS PARAMETERS INFLUENCE ON THE CHANGE OF MEAN CONTACT PRESSURE IN IRONING PROCESS, 16th International Conference on Tribology, SERBIATRIB'19, Kragujevac, 2019, 15-17,05,2019,, pp. 474-481, ISBN 2620-2832
  95. Dragan Adamović, Jelena Živković, Miloš Lazarević, Bogdan Nedić, Miroslav Živković, Fatima Živić, SELECTION OF WELDING PROCESS FOR ASSEMBLING THE ALUMINUM TRUSS USING THE CES SELECTOR SOFTWARE, 9th International Scientific Conference IRMES 2019, Kragujevac, 2019, 05.-07.09.2019., pp. 206-208, ISBN 978-86-6335-061-8
  96. Dragan Lazarević, Bogdan Nedić, Živče Šarkoćević, Ivica Čamagić, Jasmina Dedić, METHODS OF INTEGRATING MODERN MEASURING DEVICES ON MACHINING SISTEMS, 14th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2019, Banja Luka, 2019, 24.-25.05.2019., pp. 105-112, ISBN 978-99938-39-85-9
  97. Jelena BARALIĆ, Bogdan NEDIĆ, Stefan ĐURIĆ, THE INFLUENCE OF LASER MILLING PROCESS PARAMETERS ON DEPTH OF CUT AND SURFACE ROUGHNESS, 16th International Conference on Tribology, SERBIATRIB'19, Kragujevac, 2019, 15-17,05,2019,, pp. 463-467, ISBN 2620-2832
  98. Sreten PERIC, Radovan RADOVANOVIC, Bogdan NEDIC, Mihael BUCKO, RESULTS OF EXPERIMENTAL RESEARCH PHYSICAL-CHEMICAL CHARACTERISTICS OIL FROM ENGINES OF VEHICLES, 16th International Conference on Tribology, SERBIATRIB'19, Kragujevac, 2019, 15-17,05,2019,, pp. 501-507, ISBN 2620-2832
  99. Stefan Đurić, Bogdan Nedić, Jelena Baralić, Aleksandar Miljković, PYROTECHNIC SAFETY IN THE PROCESS OF DEMILITARIZATION OF EXPLOSIVE ORDNANCE FROM THE ASPECT OF APPLICATION OF NEW TECHNOLOGIES, 13. International Quality Conference, Kragujevac, 2019, 29,05-01,06,2019., pp. 355-360, ISBN 978-86-6335-059-5
  100. Stefan Đurić, Bogdan Nedić, Slobodan Malbašić, Jelena Baralić, APPLICATION OF NEW TECHNOLOGIES FOR DEMILITARIZATION ORDNANCE IN ORDER TO PROTECT ENVIRONMENT, 14th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2019, Banja Luka, 2019, 24.-25.05.2019., pp. 561-566, ISBN 978-99938-39-85-9
  101. Marko SIMONOVIĆ, Bogdan NEDIĆ, Milan SIMONOVIĆ, Dragan LAZAREVIĆ, Comparison of optical measuring systems and CMM for smaller parts, MASING 2020, The 5th International Conference Mechanical Engineering in XXI Century, Niš, 2020, pp. 1-6
  102. Miloš Lazarević, Bogdan Nedić, INFLUENCE OF THE QUANTITY OF EXPLOSIVES IN THE PROCESS OF EXPLOSIVE WELDING OF STEEL 50CRV4 (Č4830) AND S355J2G3 (Č0563), 9th International Scientific Conference On Defensive Technologies - OTEH 2020, Belgrade, Serbia, 2020, October 15-16, pp. 507-512, ISBN 978-86-81123-83-6
  103. Miloš Lazarević, Bogdan Nedić, Stefan Đurić, PROPERTIES OF EXPLOSION WELDED JOINTS OF TOOL STEEL AND LOW CARBON STEEL, 9th International Scientific Conference On Defensive Technologies - OTEH 2020, Belgrade, Serbia, 2020, October 15-16, pp. 521-527, ISBN 978-86-81123-83-6
  104. Miloš Lazarević, Vladica Živković, Bogdan Nedić, APPLICATION OF PROCESSING BY EXPLOSION IN THE AUTOMOTIVE INDUSTRY, International Congress Motor Vehicles & Motors 2020, Kragujevac, 2020, 8-9. october, pp. 197-204, ISBN 978-86-6335-074-8
  105. Sreten Perić, Bučko Mihael, Bogdan Nedić, Radovan Radovanović, CONDITION MONITORING THROUGH ENGINE OIL ANALYSIS TESTS, International Congress Motor Vehicles & Motors 2020, Kragujevac, 2020, 8-9. october, pp. 281-290, ISBN 978-86-6335-074-8