FACULTY OF ENGINEERING KRAGUJEVAC
UNIVERSITY KRAGUJEVAC
CURRICULUM VITAE
Dragan Adamovic

GENERAL INFORMATION
First and last nameDragan Adamovic
Year and place of birthSekuric, Rekovac,1960
PositionFull professor
E-mailadam@kg.ac.rs
Education-scientific / education–art fieldTechnical Technological Sciences
University, faculty, organizational unitUniversity of Kragujevac Faculty of Engineering
Field and closer specialtyMechanical Egineering, Production and Industrial Engineering, Materials Science

EDUCATION – DIPLOMAS
BACHELOR STUDIES
Year1984
PlaceKragujevac
InstitutionFaculty of Mechanical Engineering, University of Kragujevac
HeadlineDetermination of the intensity coefficient KIc
FieldProduction engineering
MSC THESIS
Year1993
PlaceKragujevac
InstitutionFaculty of Mechanical Engineering, University of Kragujevac
HeadlineAn attachment to the study of the reinforcement of dynamically loaded elements by the method of shot peening
FieldProduction engineering
PHD THESIS
Year2002
PlaceKragujevac
InstitutionFaculty of Mechanical Engineering, University of Kragujevac
HeadlineBehavior of materials in contact during the cold plastic forming processes with high working pressures
FieldProduction engineering

TECHNICAL BIOGRAPHY – POSITIONS
YearInstitutionPosition
1984University of Kragujevac Faculty of EngineeringResearch & teaching аssistant prentice
1994University of Kragujevac Faculty of EngineeringResearch & teaching assistant
2003University of Kragujevac Faculty of EngineeringAssistant professor
2008University of Kragujevac Faculty of EngineeringAssociate professor
2012University of Kragujevac Faculty of EngineeringFull professor

PROFESSIONAL BIOGRAPHY - IMPROVEMENTS
YearInstitutionDuration
2010
2011
2011
2012
2013
2013

AWARDS AND RECOGNITIONS
YearName of award/recognition
2006
2012
2009

RESULTS OF SCIENTIFIC AND RESEARCH WORK
Papers published in international scientific journals
  1. Fatima Zivic, Miroslav Babic, Nenad Grujovic, Slobodan Mitrovic, Dragan Adamovic, Influence of loose PMMA bone cement particles on the corrosion assisted wear of the orthopedic AISI 316LVM stainless steel during reciprocating sliding, Wear, Vol.300, No.1-2, pp. 65-77, ISSN 0043-1648, 2013
  2. Slobodan Mitrovic, Dragan Adamovic, Fatima Zivic, Dragan Dzunic, Marko Pantic, Friction and Wear Behavior of Shot Peened Surfaces of 36CrNiMo4 and 36NiCrMo16 Alloyed Steels under Dry and Lubricated Contact Conditions, Applied Surface Science, Vol.290, No.1, pp. 223-232, ISSN 0169-4332, Doi 10.1016/j.apsusc.2013.11.050, 2014
  3. S. Aleksandrović, M. Stefanović, D. Adamović, V. Lazić, Variation of Normal Anisotropy Ratio "r" during Plastic Forming, Strojniški vestnik - Journal of Mechanical Engineering, Vol.55, No.6, pp. 392-399, ISSN 621-983-3, 2009
  4. Adamovic D., Mandic V., Jurkovic Z., Grizelj B., Stefanovic M., Marinkovic T., Aleksandrovic S., An experimental modelling and numerical fe analysis of steel-strip ironing process, Tehnički vjesnik / Technical Gazette, Vol.17, No.4, pp. 435-444, ISSN 1330-3651, 2010
  5. B. Ristić, Z. Popović, D. Adamović, G. Devedžić, Selection of biomaterials in orthopedic surgery, Vojnosanitetski Pregled, Vol.67, No.10, pp. 847-855, ISSN 0042-8450, 2010
  6. D. Adamović, M. Stefanović, M. Babić, S. Aleksandrović, Z. Golušija, S. Mitrović, Tribological model of the ironing process in sheet metal forming for lubricants testing, Journal of the Balkan Tribological Association, Vol.16, No.No 3, pp. 329-339, ISSN 1310-4772, 2010
  7. Devedžić G., Ivanović L., Milošević D., Mirić N., Adamović D., Reasoning with linguistic preferences using npn logic, Computer Science and Informatiom Systems – ComSIS, Vol.17, No.3, pp. 511-528, ISSN 1820-0214, Doi 10.2298/CSIS090223003D, 2010
  8. V. Mandić, D. Adamović, Z. Jurković, M. Stefanović, M. Živković, S. Ranđelović, T. Marinković, Numerical FE Modelling of the Ironing Process of Aluminium Alloy and its Experimental Verification, FAMENA, Vol.34, No.4, pp. 59-69, ISSN 1333-1124, 2010
  9. S. Aleksandrović, M. Stefanović, D. Adamović, V. Lazić, M. Babić, R. Nikolić, T. Vujinović, Variable Tribological Conditions on the Flange and Nonmonotonous Forming in Deep Drawing of Coated Sheets, Journal of the Balkan Tribological Associatio, Vol.17, No.2, pp. 165-179, ISSN 1310-4772, 2011
  10. F. Zivic, M. Babic, D. Adamovic, S. Mitrovic, P. Todorovic, G. Favaro, M. Pantic, INFLUENCE OF THE SURFACE ROUGHNESS ON ADHESION OF CHROME COATINGS ON ALLOY TOOL STEEL X165CrMoV12, Journal of the Balkan Tribological Association, Vol.18, No.No 2, pp. 228–237, ISSN 1310-4772, 2012
  11. F. Zivic, M. Babic, N. Grujovic, S. Mitrovic, D. Adamovic, G. Favaro A, A Comparison of Reciprocating Sliding at Low Loads and Scratch Testing for Evaluation of TiN (PVD) Coa, Journal of the Balkan Tribological Associatio, Vol.18, No.1, pp. 80-91, ISSN 1310-4772, 2012
  12. Mandić, D. Erić, D. Adamović, M. Janjić, Z. Jurković, Ž. Babić, P. Ćosić, Concurrent engineering based on virtual manufacturing, Tehnički vjesnik/Technical Gazette, Vol.19, No.4, pp. 885-892, ISSN 1330-3651, 2012
  13. S. Mitrović, D. Adamović, F. Živić, D. Džunić, M. Pantić,D. Jevremović, Dry Sliding Wear Behaviour of PVD TIN Coatings for Cold Forming Tools, Journal of the Balkan Tribological Association, Vol.22, No.1, pp. 292–300, ISSN 1310-4772, 2016
  14. Fatima Zivic, Dragan Adamovic, Slobodan Mitrovic, Nenad Grujovic, Jovan Tanaskovic and Ivan Stojadinovic, Influence of different environments on the sliding friction of Ultra- highmolecular-weight polyethylene (UHMWPE), Proc IMechE Part J: Journal Engineering Tribology, Vol.1, No.1, pp. 1-9, ISSN 1350-6501, Doi 10.1177/13506501211053100, 2021
  15. S. Mitrović, M. Babić, D. Adamović, F. Živić, D. Džunić, M. Pantić, Wear Behaviour of Hard Cr Coatings for Cold Forming Tools Under Dry Sliding Conditions, Tribology in Industry, Vol.34, No.No 1 (2012), pp. 44-48, ISSN 2217-7965, 2012
  16. F. Živić, M. Babić, S. Mitrović, D. Adamović, S. Pelemis, Friction Coefficient of UHMWPE During Dry Reciprocating Sliding, Tribology in Industry, Vol.36, No.3, pp. 281-286, ISSN 0354-8996, 2014
  17. S. Aleksandrović, M. Đorđević, M. Stefanović, V. Lazić, D. Adamović, D. Arsić, Different Ways of Friction Coefficient Determination in Stripe Ironing Test, Tribology in Industry, Vol.36, No.3, pp. 293-299, ISSN 0354-8996, 2014
  18. S. Petrović Savić, D. Adamović, G. Devedžić, B. Ristić, A. Matić, Contact Stress Generation on the UHMWPE Tibial Insert, Tribology in Industry, Vol.36, No.4, pp. 354-360, ISSN 0354-8996, 2014
  19. D. Adamović, M. Stefanović, M. Živković, S. Mitrović, J. Živković, F. Živić, Influence of the Lubricant Type on the Surface Quality of Steel Parts Obtained by Ironing, Tribology in Industry, Vol.3, No.2, pp. 215-224, ISSN 2217-7965, 2015
  20. D. Džunic, S. Mitrovic, M. Babic, I. Bobic, M. Pantic, D. Adamovic, B. Nedeljkovic, Nanoindentation of Za-27 Alloy Based Nanocomposites Reinforced with Al2O3 Particles, Tribology in Industry, Vol.37, No.4, pp. 413-420, ISSN 2217-7965, 2015
  21. M. Pantic, S. Mitrovic, M. Babic, D. Jevremovicc, T. Kanjevac, D. Džunic, D. Adamovic, AFM Surface Roughness and Topography Analysis of Lithium Disilicate Glass Ceramic, Tribology in Industry, Vol.37, No.4, pp. 391-399, ISSN 2217-7965, 2015
  22. F. Živić, N. Grujović, S. Mitrović, D. Adamović, V. Petrović, A. Radovanović, S. Đurić, N. Palić, Friction and Adhesion in Porous Biomaterial Structure, Tribology in Industry, Vol.38, No.3, pp. 361-370, ISSN 0354-8996, 2016
  23. N. Busarac, Ž. Jovanović, S. Njezić, F. Živi, N. Grujović, D. Adamović, Experimental Study and Analytical model of Shear Thinning in 3D Bioprinting of Gelatin, Tribology in Industry, Vol.42, No.3, pp. 503-512, ISSN 2217-7965, Doi 0.24874/ti.964.09.20.09, 2020
Papers presented at international conferences
  1. V., Lazić, M., Jovanović, D. Josifović, N., Ratković, D., Adamović, Regeneration damaged working parts of forging presses and hammers by the welding and hard facing procedures, JOM – 11, Eleventh International Conference on the Joining of Materials, Heslingor, Denmark, 2003, May 25-28, 2003
  2. D. Adamović, V. Mandić, M. Stefanović, Z. Jurković, M. Živković, D. Pavletić, M. Perinić, Numerical and Experimental Analysis of the Wall Tensile Stress in Ironing, , International Conference Maintenance and Production Engineering “KODIP – 2012”, Budva, Montenegro, 2012, 26-29. June 2012, pp. 23-32, ISBN 978-9940-527-24-2
  3. В., Лазић, Д., Адамовић, Д., Јосифовић, М., Јовановић, Побољшање поступка заваривања склопа задњег моста камиона аутоматским поступком у заштити гаса, Међународно саветовање-ЗАВАРИВАЊЕ '96, Београд, 1996, pp. 84-87
  4. M., Jovanović, D., Josifović, D., Rajačić, V., Lazić, D. Adamović, Selection of Optimal Technology for Welding Tube to Housing of the Truck Rear Axle, 8. International Conference on the Joining of Materials JOM-8, Helsingor - DK, 1997, pp. 194-199
  5. V., Lazić, D., Josifović, D., Adamović, M., Jovanović, Design and application of apparatus for welding the truck body assembly in the proctective gasses atmosphere, 5th European Conference on Advanced Materials, Processes and Applications, EUROMAT '97, Maastricht - NL, 1997, 21-23 April 1997, pp. 471-474
  6. В., Лазић, М., Јовановић, Д., Рајачић, Д., Јосифовић, Д., Адамовић, Наваривање куке камионске дизалице, Међународна конференција “Заваривање у одржавању и превентивном инжењерингу”, Београд, 1997, 24-25 септембар 1997., pp. 159-164
  7. D. Adamović, M. Babić, B. Jeremić, Shot Peening Influence on Tribological Characteristics of Surfaces, ICSP7, Warsaw, Poland, 1999, pp. 350-358
  8. M., Jovanović, D., Josifović, V., Lazić, D., Adamović, V., Nedić, Determination of Optimum Relaxation Temperature in Hard Facing of the Forging Dies for Working at Elevated Temperatures,, JOM 9, Heslingor, Denmark, 1999, pp. 312-317
  9. M., Jovanović, V., Lazić, D., Josifović, D., Adamović, B., Nedić, V., Nedić, Optimization of the Hard Facing Process of Forging Dies from the Aspect of Tribological Characteristics, AMTECH 99, Plovdiv, Bulgaria, 1999, pp. 474-479
  10. D., Josifović, M., Jovanović, V., Lazić, D., Adamović, N. Ratković, Reparatory hard-facing of the machine systems parts, Tenth International JOM-Jubilee-Conference JOM-10, Heslingor, Denmark, 2001, May 11-14. 2001.
  11. В., Лазић, М., Јовановић, Н., Ратковић, Д., Адамовић, Процена отпорности на смицање модела наварених ковачких алата, ЗАВАРИВАЊЕ 2001, Београд, 2001
  12. М., Јовановић, В., Лазић, Д., Јосифовић, Д., Адамовић, Н. Ратковић, Регенерација наваривањем различитих делова машинских система, ЗАВАРИВАЊЕ 2001, Београд, 2001
  13. M., Jovanović, M., Lazić, D., Adamović, N., Ratković, An Estimate of Accuracy of Empirical Formulae for Calculating the Cooling Time (t8/5) After Hard-facing, International Conference Heavy Machinery-HM’02, Kraljevo, 2002, 27-30 June 2002, pp. B.21-B.26
  14. В., Лазић, М., Јовановић, Н., Ратковић, Д., Адамовић, Р., Вуловић, Процена отпорности на хабање наварених слојева изведених манганском електродом, X Југословенска конференција - Железничко машинство са међународним учешћем, ЖЕЛКОН '02, Ниш, 2002, pp. 207-212
  15. Д., Адамовић, М., Стефановић, В., Лазић, Истраживање утицајних параметара на процес дубоког извлачења са стањењем дебљине зида, ДЕМИ 2002, Бања Лука, 2002, pp. 166-171
  16. M., Jovanović, V., Lazić, N., Ratković, D., Adamović, M. Mutavdžić, Estimate of wear resistance of the hard-faaced layers made by manganese electrode, 1th International Scietific Conference, Žilina, Slovak Republi, 2003, 17-19. 09. 2003., pp. 105-108
  17. В., Лазић, М., Јовановић, Д., Адамовић, М., Мутавџић, Репаратурно наваривање алата за обраду земљишта изложених абразивном хабању, ЗАВАРИВАЊЕ 2003, Београд, 2003
  18. В., Лазић, М., Јовановић, Д., Адамовић, М., Мутавџић, Утицај врсте карбида на триболошке карактеристике наварених слојева, Осма интернационална конференција о трибологији, Београд, 2003, 8- 10 Октобар 2003., pp. 111-121
  19. В., Лазић, М., Јовановић, Д., Адамовић, Н., Ратковић, Избор најповољније технологије репаратуре ковачких алата из аспекта триболошких карактеристика, ЗАВАРИВАЊЕ 2003, Београд, 2003
  20. В., Лазић, М., Јовановић, Р. Вуловић, Д., Адамовић, Спајање месинга и нискоугљеничних челика електроотпорским лемљењем, ЗАВАРИВАЊЕ 2003, Београд, 2003
  21. Д., Адамовић, М. Стефановић, В., Лазић, Б., Недић, Утицај триболошких услова на храпавост површине лима при обради дубоким извлачењем са стањењем дебљине зида, Осма интернационална конференција о трибологији, Београд, 2003, 8- 10 Октобар 2003., pp. 351–359
  22. М., Мутавџић, М., Јовановић, В., Лазић, Н., Ратковић, Д., Адамовић, Избор оптималне технологије репаратуре делова изложених хабању, XI Југословенска конференција - Железничко машинство са међународним учешћем, ЖЕЛКОН 04, Ниш, 2004, pp. 277-282
  23. D., Adamović, M. Stefanović, V., Lazić, M., Živković, Influence of tribological conditions onto the sheet metal surface roughness at multiphase ironing, BALKANTRIB '05, Крагујевац, 2005, pp. 70-77
  24. D., Adamović, M. Stefanović, V., Lazić, M., Živković, N. Marjanović, nfluence of tribological conditions onto the friction coefficient at multiphase ironing, 5th International Conference “Research and Development in Mechanical Industry” RaDMI 2005, Врњачка Бања, 2005, 04-07. Septembar 2005, pp. 305-310
  25. R., Vulović, V., Lazić, M., Jovanović, R., Nikolić, D., Adamović, Selection of the welding technology of reliable joints using GMAW proces, he fifth international conference HEAVY MACHINERY HM 2005, Краљево, 2005, pp. II A.5–II A.8
  26. V., Lazić, M., Živković, D., Rakić, M., Jovanović, D., Adamović, Theoretical-experimental determining of cooling time (t8/5) in hard facing, he fifth international conference HEAVY MACHINERY HM 2005, Краљево, 2005, pp. II A.17–A 20
  27. В., Лазић, М., Јовановић, Д., Адамовић, Р., Николић, Избор технологије заваривања и контроле одговорних заварених спојева, 30. Јубиларно саветовање производног машинства СЦГ са међународним учешћем, Врњачка Бања, 2005, 01-03. септембар 2005., pp. 297-302
  28. Д., Адамовић, М. Стефановић, В., Лазић, М., Живковић, Н., Марјановић, Истраживање утицаја материјала алата и мазива на силу дубог извлачења са стањењем зида, 30. Јубиларно саветовање производног машинства СЦГ са међународним учешћем, Врњачка Бања, 2005, 01-03. септембар 2005., pp. 303-308
  29. V., Lazić, M., Jovanović, D., Adamović, D., Josifović, N., Ratković, Development and application of welding technologies for regeneration of damaged working parts of forging presses and hammers, Welding and Joining Technologies for a Sustainble Development and Environment, Timisoara, Romania, 2006, 24-26.05.2006, pp. 341-346
  30. В. Лазић, М. Јовановић, М. Живковић, Д. Адамовић, Н. Ратковић, Iзбор и провера технологије репаратуре одговорног процесног постројења, JINA 2006, Научно-стручно саветовање са међународним учешћем “Регионално коришћење енергије у металургији и процесној индустрији”, Београд, 2006, 16-17 март 2006, pp. 105-115
  31. В., Лазић, М., Мутавџић, М., Јовановић, Д., Адамовић, Б., Недић, Производно наваривање лопатица мешалица асфалтних база, “ЗАВАРИВАЊЕ 2006”, Златибор, 2006, 26-29.04.2006
  32. Д., Адамовић, М., Стефановић, М., Живковић, В., Лазић, тицај различитих параметара на силу извлачења при дубоком извлачењу са стањењем дебљине зида, 31. Саветовање производног машинства, Крагујевац, 2006, 19.-21. септембар 2006, pp. 171-180
  33. М., Јовановић, М., Мутавџић, В., Лазић, Б. Недић, Д., Адамовић, Репаратурно наваривање ножева ротационог уређаја за равнање терена, ЗАВАРИВАЊЕ 2006, Златибор, 2006, 26-29.04.2006.
  34. Д., Адамовић, М., Стефановић, М., Живковић, Експерименталне методе одређивања коефицијента трења при дубоком извлачењу са стањењем дебљине зида, ДЕМI 2007, VII Међународни научно-стручни скуп о достигнућима електротехнике, машинства и информатике, Бања Лука, 2007, pp. 199-206
  35. D. Adamović, M. Stefanović, A. Davinić, B. Nedić, Promena temperature u zoni kontakta pri dubokom izvlačenju sa stanjenjem debljine zida, XXXII Savetovanje proizvodnog mašinstva sa međnunarodnim učešćem, Нови Сад, 2008, 8.-20.09.2008
  36. D. Adamovic, M. Stefanovic, M. Plancak, S. Aleksandrovic, Analysis of Change of Total Drawing Force and Friction Force on Punch at Ironing, 3rd International Conference on Manufacturing Engineering (ICMEN), Chalkidiki, Greece, 2008, 1-3 October 2008, pp. 245-254
  37. M. Babić, D. Adamović, B. Jeremić, S. Mitrović, Tribological Effects of Shot Peening Surface Treatment, 3rd International Conference on Manufacturing Engineering (ICMEN), Chalkidiki, Greece, 2008, 1-3 October 2008, pp. 657-664
  38. M. Stefanovic, S. Aleksandrovic, M. Milovanovic, D. Adamovic, Formability of Sheet Materials for Light Automotive Panels, 3rd International Conference on Manufacturing Engineering (ICMEN), Chalkidiki, Greece, 2008, 1-3 October 2008, pp. 263-270
  39. Adamović, D., Devedžić, G., Ristić, B., Ivanović, L, Izbor materijala za implantate, XXXIII Savetovanje proizvodnog mašinstva Srbije 2009 sa međunarodnim učešćem, Београд, 2009, 16-17.06.2009., pp. 51-60
  40. Adamović, D., Stefanović, M., Živković, M., Devedžić, G., Uticaj parametara dubokog izvlačenja sa stanjenjem debljine na napon zatezanja zida izvlačenog čeličnog dela, XXXIII Savetovanje proizvodnog mašinstva Srbije 2009 sa međunarodnim učešćem, Београд, 2009, 16-17.06.2009., pp. 109-112
  41. D. Adamović, M. Stefanović, M. Živković, S. Rakić, Uticaj brzine dubokog izvlačenja sa stanjenjem debljine zida na promenu koeficijenata trenja, 1. Internacionalna Konferencija o Tribologiji SERBIATRIB ’09, Београд, 2009, 13 - 15 Maj 2009, pp. 338-342
  42. D., Adamović, M., Stefanović, S., Aleksandrović, Modeliranje triboloskih procesa pri obradi dubokim izvlačenjem sa stanjenjem debljine zida, DEMI 2009, Бања Лука, 2009
  43. M. Stefanović, S. Aleksandrović, D. Adamović, M. Samardžić, Uticaj kontaktnih uslova na oblikovanje dvostranim zatezanjem tankih limova, 11. Internacionalna Konferencija o Tribologiji SERBIATRIB ’09, Београд, 2009, 13 - 15 Maj 2009, pp. 334-337
  44. Stefanović, M., Aleksandrović, S., Stanojević, M.Đ., Adamović, D, Ekološki prihvatljive tehnologije obrade metala deformisanjem, XXXIII Savetovanje proizvodnog mašinstva Srbije 2009 sa međunarodnim učešćem, Београд, 2009, 16-17.06.2009., pp. 331-334
  45. M. Vuković, V. Lazić, D. Adamović, Z. Živković, Eksperimentalno ispitivanje i numerička simulacija aksijalne čvstoće tačkasto zavarenog spoj, YUInfo2010, Kopaonik, 2010, 3-6. Mart
  46. Mandić V., Adamović D., Jurković Z., Stefanović M., Zivković M., Ranđelović S., Marinković T., CAE analysis of ironing process with experimental verificatio, International Scentific Conference, Menagement of Technology Step to Sustaniable Production, Rovinj, Croatia, 2010, 2-4. June, ISBN 978-953-7738-09-9
  47. Babic Miroslav, Mitrovic Slobodan, Adamovic Dragan, Dzunic Dragan, Zivic Fatima, The effect of shot peening on tribological behavior of alloyed steels, 11th International Conference on Shot Peening, ICSP-11, South Bend, Indiana, USA, 2011, September 12-15
  48. D. Adamović, M. Stefanović, B. Jeremić, S. Aleksandrović, The effects of shot peening on the fatigue life of machine elements, 34th International conference on production engineering, Niš, 2011, 28. - 30. September, pp. 421-424, ISBN 978-86-6055-019-6
  49. D. Adamović, M. Stefanović, S. Aleksandrović, M. Živković, Z. Gulišija, The influence of various process parameters on coefficient of friction on die at ironing of AlMg3 sheet metals, 12th International Conference on Tribology, SERBIATRIB ’11, Kragujevac, Serbia, 2011, 11 – 13 May, pp. 342-348, ISBN 978-86-86663-74-0
  50. D. Adamović, M. Stefanović, S.v Aleksandrović, M. Živković, Z. Gulišija, S. Đačić, The influence of tool surface condition on ironing process execution, 34th International conference on production engineering, Niš, 2011, 28. - 30. September, pp. 289-292, ISBN 978-86-6055-019-6
  51. D. Adamovic, V. Mandic, M. Stefanovic, S. Aleksandrovic, M. Živkovic, Z. Golušija, S. Randjelovic, Experimental and numerical determination of the tensile stresses in the wall during steel sheet ironing, ICMEN 4th International Conference on Manufacturing Engineering, Proceedings, Thessaloniki, 2011, 3-5 October, pp. 621-630, ISBN 978-960-98780-4-3
  52. F. Zivic, M. Babic, D. Adamovic, S. Mitrovic, G. Favaro, M. Pantic, Influence of the surface roughness on adhesion of chrome coatings on alloy tool steel X165CrMoV12, 9th International Conference The “A“ Coatings in Manufacturing Engeneering, Thesssaloniki, 2011, 3-5 October, pp. 389-396, ISBN 978-960-98780-5-0
  53. F. Zivić, M. Babić, S. Mitrović, D. Adamović, N. Grujović, Tribology in biomaterials design and selection, 12th International Conference on Tribology, SERBIATRIB ’11, Kragujevac, Serbia, 2011, 11 – 13 May, pp. 157-167, ISBN 978-86-86663-74-0
  54. M. Babic, D. Adamovic, S. Mitrovic, F. Živic, D. Dzunic, Wear properties of shot peened surfaces of 36NiCrMo16 alloyed steels under lubricated condition, 7th BALKANTRIB’11 International Conference on Tribology, Thesssaloniki, 2011, 3-5 October, pp. 69-76, ISBN 978-960-98780-6-7
  55. M. Babić, D. Adamović, S. Mitrović, F. Živić, D. Džunić, M. Pantić, Tribological properties of shot peened surfaces of 36NiCrMo16 alloyed steels in dry sliding condition, 12th International Conference on Tribology, SERBIATRIB ’11, Kragujevac, Serbia, 2011, 11 – 13 May, pp. 168-173, ISBN 978-86-86663-74-0
  56. M. Stefanovic, D. Vilotic, M. Plancak, S. Aleksandrovic, D. Adamovic, Influence of strain history on limit formability in metal forming, ICMEN 4th International Conference on Manufacturing Engineering, Proceedings, Thessaloniki, 2011, 3-5 October, pp. 569-578, ISBN 978-960-98780-4-3
  57. M. Stefanović, D. Vilotić, M. Plančak, S. Aleksandrović, Z.Gulišija, D. Adamović, Forming limit indicators in metal forming, 0th anniversary international conference on accomplisments in electrical and mechanical engineering and information technology, DEMI 2011, Banja Luka, 2011, 26-28. Mai, pp. 327-336, ISBN 978-99938-39-36-1
  58. M. Stefanović, S. Aleksandrović, D. Adamović, About papers in the area of metal forming presented at demi conferences held so far, 10th anniversary international conference on accomplisments in electrical and mechanical engineering and information technology, DEMI 2011, Banja Luka, 2011, 26-28. Mai, pp. 391-398, ISBN 978-99938-39-36-1
  59. M. Stefanović, S. Đačić, S. Aleksandrović, D. Adamović, Importance of tribological conditions at multi-phase ironing, 34th International conference on production engineering, Niš, 2011, 28. - 30. September, pp. 503-506, ISBN 978-86-6055-019-6
  60. S. Aleksandrović T. Vujinović, M. Stefanović, V. Lazić, D. Adamović, Computer controlled experimental device for investigations of tribological influences in sheet metal forming, 10th anniversary international conference on accomplisments in electrical and mechanical engineering and information technology, DEMI 2011, Banja Luka, 2011, 26-28. Mai, pp. 285-290, ISBN 978-99938-39-36-1
  61. S. Aleksandrović, T. Vujinović, M. Stefanović , V. Lazić, D. Adamović, Physical modelling of variable contact pressure and variable drawbead height influence on deep drawing of thin sheets, 12th International Conference on Tribology, SERBIATRIB ’11, Kragujevac, Serbia, 2011, 11 – 13 May, pp. 157-167, ISBN 978-86-86663-74-0
  62. S. Aleksandrovic, T. Vujinovic, M. Stefanovic, V. Lazic, D. Adamovic, Variable contact pressure and variable drawbead height influence on deep drawing of al alloys sheets, 34th International conference on production engineering, Niš, 2011, 28. - 30. September, pp. 277-280, ISBN 978-86-6055-019-6
  63. S. Aleksandrovic, T. Vujinovic, M. Stefanovic, V. Lazic, D. Adamovic, S. DJacic, Adjustable drawbead and variable contact pressure as tribological influences in sheet metal stripe sliding test, ICMEN 4th International Conference on Manufacturing Engineering, Proceedings, Thessaloniki, 2011, 3-5 October, pp. 597-606, ISBN 978-960-98780-4-3
  64. S. Đačić, M. Stefanović, S. Aleksandrović, D. Adamović, Characteristics of friction in sheet metal sliding with thickness reduction, 12th International Conference on Tribology, SERBIATRIB ’11, Kragujevac, Serbia, 2011, 11 – 13 May, pp. 366-369, ISBN 978-86-86663-74-0
  65. S. Mitrović, M. Babić, D. Adamović, D. Džunić, M. Pantić, Wear behaviour of tin coatings for cold forming tools under dry sliding conditions, 2th International Conference on Tribology, SERBIATRIB ’11, Kragujevac, Serbia, 2011, 11 – 13 May, pp. 174-180, ISBN 978-86-86663-74-0
  66. S. Mitrović, M. Babić, D. Adamović, F. Živić, D. Džunić, M. Pantić, Wear behaviour of hard Cr coatings for cold forming tools under dry sliding conditions, 34th International conference on production engineering, Niš, 2011, 28. - 30. September, pp. 519-522, ISBN 978-86-6055-019-6
  67. D. Adamović, V. Mandić, M. Stefanović, Z. Jurković, M. Terčelj, M. Živković, Investigation of the Influence of Total Force and Punch Force in the Ironing of AlMg3 Alloy, International Conference Management of Technology – Step to Sustainable Production (MOTSP 2012), Zadar, Croatia, 2012, 14-16 June 2012, pp. 320-327, ISBN 1847-6880
  68. M. Bojić, D. Adamović, J. Radulović, M. Miletić, I. Miletić, V. Marjanović, Awareness on Energy Saving Needs in Serbia in Low-Rise Houses, 6th International Quality Conference, Kragujevac, Serbia, 2012, June 08th 2012.
  69. M. Bojic, D. Adamovic, J. Radulović, M. Miletić, I. Miletić, V. Marjanović, Public Opinion Survey: Awareness on Energy Saving Needs in Serbia, The Second International Conference on Building Energy and Environment (COBEE2012), Boulder, Colorado, US, 2012, August 1-4,, pp. 1257-1264, ISBN 978-0-9816881-9-0; 0-9816881-9-5
  70. M. Bojic, D. Adamovic, J. Radulović, M. Miletić, I. Miletić, V. Marjanović, Z. Djordjević:, Awareness on energy savings in low-rise houses in Serbia, 43rd International Congress & Exhibition on Heating, Refrigeration and Air Conditioning, Belgrade, 2012, 5–7. XII
  71. M. Bojic, D. Adamovic, J. Radulović, M. Miletić, V. Marjanović, Z. Perisic, Survey: lighting use in Serbian lowrise houses, A 47- a CONFERINTA NATJONALA DE INSTALATJI, SINAIA- ROMANIA, 2012, 17-19 octombrie, pp. 61-69, ISBN 978-973-755-857-2
  72. M. Stefanović, S. Aleksandrović, M. Đ. Stanojević, D. Adamović, Z. Gulišija, M. Đorđević, Ecological Metal Forming Technologies -Possibilities and Limitations, International Conference Maintenance and Production Engineering “KODIP – 2012”, Budva, Montenegro, 2012, 26-29. June 2012, pp. 135-142, ISBN 978-9940-527-24-2
  73. 10. Milorad Bojic, Dragan Adamovic, Marko Miletic, Ivan Miletic, Jasna Radulovic, Awareness on energy saving in low-rise housing, Conferinta nationala cu participare internationala Instalatii pentru constructii confortul ambiental, Editia a 22- a, Timisoara, Romania, 2013, 11-12 aprilie, pp. 293-302, ISBN 1842- 9491
  74. Djordjevic Zorica, Jovanovic Sasa, Bojic Milorad, Cvetkovic Dragan, Adamovic Dragan, The influence of electrical appliances on spending energy in households, 11th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013, Banja Luka, 2013, 30. May – 1. June, pp. 779-784, ISBN 978-99938-39-46-0
  75. Dragan Adamović, Milentije Stefanović, Srbislav Aleksandrović, Miroslav Živković, Fatima Živić, Marko Topalović, Analysis of tribological process during ironing of sheet metal made of AlMg3, SERBIATRIB '13, 13th International Conference on Tribology, Kragujevac, 2013, 15 – 17 May, pp. 265-269, ISBN 978-86-86663-98-6
  76. Dragan Adamović, Vesna Mandić, Milentije Stefanović, Srbislav Aleksandrović, Miroslav Živković, Analysis of the temperature change on the tool and work piece during the ironing process, 11th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013, Banja Luka, 2013, 30. May – 1. June, pp. 299-306, ISBN 978-99938-39-46-0
  77. Fatima Zivic, Miroslav Babic, Slobodan Mitrovic, Dragan Adamovic, Friction coefficient during reciprocating sliding of UHMWPE in ringer's solution, International Scientific and Technical Conference “Polymer Composites and Tribology”, POLYCOMTRIB 2013, Gomel, Belarus, 2013, 24-27 June
  78. Fatima Živić, Miroslav Babić, Slobodan Mitrović, Dragan Adamović, Svetlana Pelemis, Friction coefficient of UHMWPE during dry reciprocating sliding, SERBIATRIB '13, 13th International Conference on Tribology, Kragujevac, 2013, 15 – 17 May, pp. 87-91, ISBN 978-86-86663-98-6
  79. Marija Jeremić, Dragan Adamović, Slobodan Mitrović, Bojan Bogdanović, Aleksandar Simić, Saša Ranđelović, Petar Todorović, Influence of oxidation layer generated on preheated contact pairs on static coefficient of friction, SERBIATRIB '13, 13th International Conference on Tribology, Kragujevac, 2013, 15 – 17 May, pp. 147-152, ISBN 978-86-86663-98-6
  80. Milentije Stefanovic, Dragan Adamovic, Mica Dorovic-Stanojevic, Zvonko Gulisija, Srbislav Aleksandrovic, Development of new lubricants for metal forming, XI International Conference- Maintenance and Productiona Engineerning, KODIP - 2013, Budva, 2013, 16-19 June, pp. 161-168, ISBN 978-9940-527-33-4
  81. Milentije Stefanovic, Dragan Adamovic, Zvonko Gulisija, Andreja Stefanovic, Milan Milovanovic, Production technology and energy savings: General principles, XI International Conference- Maintenance and Productiona Engineerning, KODIP- 2013, Budva, 2013, 16-19 June, pp. 47-52, ISBN 978-9940-527-33-4
  82. Milentije Stefanović, Dragan Džunić, Vesna Mandić, Srbislav Aleksandrović, Dragan Adamović, Slobodan Mitrović, Increasing of tool life for hot forging using surface modification, SERBIATRIB '13, 13th International Conference on Tribology, Kragujevac, 2013, 15 – 17 May, pp. 261-264, ISBN 978-86-86663-98-6
  83. Milentije Stefanović, Vesna Mandić, Zvonko Gulišija, Srbislav Aleksandrović, Dragan Adamović, Improving the quality of Al- alloys hot forging parts, 11th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013, Banja Luka, 2013, 30. May – 1. June, pp. 447-452, ISBN 978-99938-39-46-0
  84. Milorad Bojic, Dragan Adamovic, Jasna Radulovic, Ivan Miletic, Ljubisa Bojic, Air conditioning in serbian low-rise houses, 7th IQC International Quality Conference, Kragujevac, Serbia, 2013, May 24, pp. 541-546, ISBN 978 - 86 - 86663 - 94 – 8
  85. Milorad Bojic, Dragan Adamovic, Jasna Radulovic, Marko Miletic, Ljubisa Bojic, Lighting use in serbian low-rise houses, 7th IQC International Quality Conference, Kragujevac, Serbia, 2013, May 24., pp. 523-528, ISBN 978 - 86 - 86663 - 94 - 8
  86. S Aleksandrović, M. Stefanović, V. Lazić, D. Adamović, M. Djordjević, D. Arsić, Different ways of friction coefficient determination in stripe ironing test, SERBIATRIB '13, 13th International Conference on Tribology, Kragujevac, 2013, 15 – 17 May, pp. 359-363, ISBN 978-86-86663-98-6
  87. Zorica Djordjevic, Sasa Jovanovic, Milorad Bojic, Dragan Adamovic, Milos Matejic, The influence of tv and video appliances and information technology equipment on energy consumption in households, 7th IQC International Quality Conference, Kragujevac, Serbia, 2013, May 24, pp. 351-356, ISBN 978 - 86 - 86663 - 94 - 8
  88. Jasmina Mikovic, Sandra Velickovic, Srbislav Aleksandrovic, Dragan Adamovic, Dobrivoje Catic, Application of Taguchi methods in testing tensile strength of polyethylene, 8th International Quality Conference (IQC),, Kragujevac, 2014, May 23rd, pp. 575-581, ISBN 978 - 86 - 6335 - 004 – 5
  89. M. Stefanovic, D. Adamovic, S. Aleksandrovic, Z.Gulisija, M.Milovanovic, M.Samardzic, Influence of contact conditions and strain path on stretching of steel and al-alloy sheet metals, 5th International Conference on Manufacturing Engineering (ICMEN), Thessaloniki, Greece, 2014, 1-3 October, pp. 51-60, ISBN 978-960-98780-9-8
  90. Sandra Velickovic, Jasmina Mikovic, Dragan Adamovic, Srbislav Aleksandrovic, Jasna Glisovic, Dobrivoje Catic, Investigation of the environmental factors’ influence on the mechanical properties of plastics, 8th International Quality Conference (IQC), Kragujevac, 2014, May 23rd, pp. 527-533, ISBN 978-86-6335-004–5
  91. Dragan Adamović, Milentije Stefanović, Miroslav Živković, Slobodan Mitrović, Jelena Živković, Fatima Živić, Influence of lubricant type on the surface quality of aluminium parts obtained by ironing, 14th International Conference on Tribology – SERBIATRIB '15, Belgrade, 2015, 13-15 May, pp. 397-406, ISBN 978-86-7083-857-4
  92. Dragan Džunić, Slobodan Mitrović, Miroslav Babić, Ilija Bobić, Marko Pantić, Dragan Adamović, Branislav Nedeljković, Nanoindentation of ZA27 alloy based nanocomposites reinforced with Al2O3 particles, 14th International Conference on Tribology – SERBIATRIB '15, Belgrade, 2015, 13-15 May, pp. 73-80, ISBN 978-86-7083-857-4
  93. Fatima Zivic, Nenad Grujovic, Slobodan Mitrovic, Dragan Adamović, Vojislav Petrovic, Luka Bukvic, Andreja Radovanovic, Influence of the biomaterial porosity on the host tissue response, the friction and adhesion, Proceedings 14th International Conference on Tribology – SERBIATRIB '15, Belgrade, 2015, 13-15 May, pp. 475-484, ISBN 978-86-7083-857-4
  94. Jelena Živković, Dragan Adamović, Miroslav Živković, Milentije Stefanović, Slobodan Mitrović, Fatima Živić, Electronic Databases for Materials Selection, 12. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology - DEMI 2015, Banja Luka, 2015, May, pp. 569-576, ISBN 978-99938-39-53-8
  95. Marko Pantić, Slobodan Mitrović, Miroslav Babić, Danimir Jevremović, Dragan Džunić, Fatima Živić, Dragan Adamović, AFM surface roughness and topography analysis of lithium disilicate glass ceramic, 14th International Conference on Tribology – SERBIATRIB '15, Belgrade, 2015, 13-15 May, pp. 514-521, ISBN 978-86-7083-857-4
  96. Milentije Stefanović, Dragan Adamović, Zvonko Gulišija, Srbislav Aleksandrović, Milija Kraišnik, Vesna Mandić, Characteristics and limitations of physical tribo-modelling in deep drawing of thin sheet metal, 14th International Conference on Tribology – SERBIATRIB '15, Belgrade, 2015, 13-15 May, pp. 382-387, ISBN 978-86-7083-857-4
  97. Milentije Stefanović, Dragan Adamović, Zvonko Gulišija, Srbislav Aleksandrović, Vesna Mandić, Milan Milovanović, Limitations of Physical Tribo-modeling in Metal Forming Processes, 12. International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology, DEMI 2015, Banja Luka, 2015, May, pp. 111-118, ISBN 978-99938-39-53-8
  98. 6. N. Vučetić, D. Adamović, G. Jovičić, Kvantitativne metode izbora materijala električnih uređaja, XV međunarodni naučno-stručni simpozijum Infoteh-Jahorina 2016, Jahorina, 2016, 16-18. mart, pp. 430-435, ISBN 978-99955-763-9-4
  99. M. Stefanović, D. Adamović, A. Stefanović, M. Kraišnik, Ekološki i energetski aspekti u razvoju tehnologija plastičnog oblikovanja, 3. Međunarodna naučna konferencija, ”Primijenjene tehnologije u mašinskom inženjerstvu” COMETa2016, Istočno Sarajevo – Jahorina, 2016, 7 - 9. decembar, pp. 249-254, ISBN 978-99976-623-7-8
  100. Dragan Adamovic, Miroslav Živković, Tomislav Vujinović, Fatima Živić, Marko Topalović1, Marko Pantić, Wear of the tools for the ironing process and methods for increasing their lifetime, 15th International Conference on Tribology, Serbiatrib '17, Kragujevac, 2017, 17-19 May, pp. 408-416, ISBN 978-86-6335-041-0
  101. Dragan Adamovic, Miroslav Živković, Tomislav Vujinović, Slobodan Mitrović, Jelena Živković, Dragan Džunić, Damage and destruction of workpiece and tool surfaces in ironing process, 15th International Conference on Tribology, Serbiatrib '17, Kragujevac, 2017, 17-19 May, pp. 388-393, ISBN 978-86-6335-041-0
  102. Katarina Lekovic, Varun Sharma, Nenad Grujovic, Dragan Adamovic, Slobodan Mitrovic, Fatima Zivic, High friction coefficient materials, 15th International Conference on Tribology, Serbiatrib '17, Kragujevac, 2017, 17-19 May, pp. 128-135, ISBN ISBN 978-86-6335-041-0
  103. Marko Pantić, Slobodan Mitrović, Miroslav Babić, Danimir Jevremović, Tatjana V. Kanjevac, D. Džunić, D. Adamović, Micro scratch behaviour of lithium disilicate glass ceramic after glazing treatment, 15th International Conference on Tribology, Serbiatrib '17, Kragujevac, 2017, 17-19 May, pp. 645-651, ISBN 978-86-6335-041-0
  104. Stefan Đurić, Dragan Adamović, Bogdan Nedić, Bratislav Trifunović, Desimir Jovanović, Material selection of protective coatings, 37th International Conference on Production Engineering Of Serbia - ICPE-S 2018, Kragujevac, 2018, 25 – 26 October, pp. 99-74, ISBN ISBN: 978-86-6335-057-1
  105. Bogdan Nedić, Lazar Slavković, Stefan Đurić, Dragan Adamović, Slobodan Mitrović, Surface roughness quality, friction and wear of parts obtained on 3D printer,, 16th International Conference on Tribology SERBIATRIB’19, Kragujevac, 2019, 15-17. May, pp. 98-103, ISBN 2620-2832
  106. Dragan Adamović, Jelena Živković, Bogdan Nedić, Fatima Živić, Slobodan Mitrović, Miroslav Živković, Analysis of the process parameters influence on the change of mean contact pressure in ironing process, 16th International Conference on Tribology SERBIATRIB’19, Kragujevac, 2019, 15-17. May, pp. 474-481, ISBN 2620-2832
  107. Živana Jovanović, Fatima Živić, Nenad Grujović, Dragan Adamović, Slobodan Mitrović, Review of existing clinical solutions for artifical joints, Proceedings on Engineering Sciences, 16th International Conference on Tribology SERBIATRIB’19, Kragujevac, 2019, 15-17. May, pp. 698-705, ISBN 2620-2832
  108. Dragan Adamović, Jelena Živković, Miloš Lazarević, Bogdan Nedić, Fatima Živić, Tomislav Vujinović, Application of the Ces Edupack Software in the Selection of the Aluminium Truss Joining, 38th International Conference on Production Engineering of Serbia - ICPE-S 2021, Čačak, 2021, 14 – 15. October, pp. 250-260, ISBN 978-86-7776-252-0
  109. Fatima Zivic, Dragan Adamovic, Slobodan Mitrovic, Nenad Grujovic, Jovan Tanaskovic, Nina Busarac, Ivan Stojadinovic, Friction coefficient during the reciprocating sliding of UHMWPE in different environments, 10th International Conference on Tribology, BALKANTRIB '20, Belgrade, 2021, 20 – 22 May, pp. 23-24, ISBN 978-86-6060-072-3
  110. Marko Delić, Dragan Adamović, Vesna Mandić, Tomislav Vujinović, Selection of Die and Punch Materials in Steel Ironing Process, 38th International Conference on Production Engineering of Serbia - ICPE-S 2021, Čačak, 2021, 14 – 15. October, pp. 85-91, ISBN 978-86-7776-252-0
  111. Vladica Živković, Dragan Adamović, Bogdan Nedić, Tomislav Vujinović, Fatima Živić, Selection of Materials of Transverse Arms of Independent Vehicle Suspension System Using Quantitative Method of Influence of Properties, 38th International Conference on Production Engineering of Serbia - ICPE-S 2021, Čačak, 2021, 14 – 15. October, pp. 386-393, ISBN 978-86-7776-252-0
  112. Živana Jovanović, Đorđe Urošević, Dragan Adamović, Saša Njezic, Nenad Grujović, Fatima Živić, Strength Analysis of the Window Profiles Made of Polyvinyl Chloride (PVC), 38th International Conference on Production Engineering of Serbia - ICPE-S 2021, Čačak, 2021, 14 – 15. October, pp. 123-130, ISBN 978-86-7776-252-0
  113. M. Stefanović, S. Aleksandrović, D. Adamović, Friction at sheet metal testing by ironing in conditions of high pressure, INTERTRIBO, Strbske Pleso, Czechoslovakia, 1990, pp. 135-136
  114. D., Josifović, M., Jovanović, B., Srećković, D., Adamović, V., Lazić, Surfacing of Forging Dies for Working at Elevated Temperatures, MATERIALS CONGRESS '98, Cirencester, UK, 1998, pp. 75
  115. D., Josifović, V., Lazić, M., Jovanović, B., Nedić, D., Adamović, Evaluation of various lubricants quality in tribological investigations of the hard faced forging dies, WOM 2001-1, Toronta, Canada, 2001, pp. 158
  116. Varun Sharma, Nenad Grujovic, Fatima Zivic, Dragan Adamovic, Bogdan Vasiljevic, Numerical modeling of porous PMMA bone cement under compressive loading, International Conference on Biomaterials, BioEngineering & BioTheranostics, BioMET 2018, Vellore, India, 2018, 24th - 28th July, pp. 173-174
  117. Dragan Adamović, Jelena Živković, Miloš Lazarević, Bogdn Nedić, Miroslav Živković, Fatima Živić, Selection of welding process for assembling the aluminum truss using the ces selector software, 9th International Scientific Conference Research and Development of Mechanical Elements and Systems IRMES 2019, Kragujevac, 2019, 5‐7, September, pp. 206-207, ISBN 978‐86‐6335‐061‐8