ФАКУЛТЕТ ИНЖЕЊЕРСКИХ НАУКА
УНИВЕРЗИТЕТ У КРАГУЈЕВЦУ
CURRICULUM VITAE
Драган Џунић

OСНОВНИ ПОДАЦИ
Име и презимеДраган Џунић
Година и место рођењаБања Лука
ЗвањеИстраживач сарадник
E-maildzuna@kg.ac.rs
Образовно-научно / образовно-уметничко пољеТехничко технолошке науке
Универзитет, факултет, организациона јединицаУниверзитет у Крагујевцу, Машински факултет, Центар за трибологију
Област и ужа специјалностПроизводно машинство, Индустријски инжењеринг

СТРУЧНА БИОГРАФИЈА - ДИПЛОМЕ
ОСНОВНЕ СТУДИЈЕ
Година2008
МестоКрагујевац
ИнституцијаМашински факултет
НасловУправљање знањем у ЦИМ окружењу
ОбластИндустријски инжењеринг
ДОКТОРСКА ДИСЕРТАЦИЈА
Година2015
МестоКрагујевац
ИнституцијаМашински факултет у Крагујевцу
НасловАнализа процеса трења и хабања са металном основом
ОбластТрибологија

СТРУЧНА БИОГРАФИЈА - ЗВАЊА
Година избораИнституцијаЗвање
2009Машински факултетИстраживач сарадник
2012Факултет инжењерских наукаИстраживач сарадник

НАУЧНО-ИСТРАЖИВАЧКИ РАД
Списак резултата М21
Рад у врхунском међународном часопису
Број
2
Укупан
  1. Miroslav Babic, Slobodan Mitrovic, Dragan Džunić, Branislav Jeremic, Ilija Bobic, Tribological Behavior of Composites Based on Za-27 Alloy Reinforced With Graphite Particles, Tribology Letters, Vol.37, No.2, pp. 401-410, ISSN 1023-8883, Doi 10.1007/s11249-009-9535-2, 2010
  2. Slobodan Mitrovic, Dragan Adamovic, Fatima Zivic, Dragan Dzunic, Marko Pantic, Friction and Wear Behavior of Shot Peened Surfaces of 36CrNiMo4 and 36NiCrMo16 Alloyed Steels under Dry and Lubricated Contact Conditions, Applied Surface Science, Vol.290, No.1, pp. 223-232, ISSN 0169-4332, Doi 10.1016/j.apsusc.2013.11.050, 2014
Списак резултата М22
Рад у истакнутом међународном часопису
Број
1
Укупан
  1. Djordje Vukelic, Branko Tadic, Dragan Dzunic, Vladimir Kocovic, Ljiljana Brzakovic, Milutin Zivkovic, Goran Simunovic, Analysis of ball-burnishing impact on barrier properties of wood workpieces, International Journal of Advanced Manufacturing Technology, Vol.92, No.1-4, pp. 129–138, ISSN 0268-3768, Doi 10.1007/s00170-017-0134-3, 2017
Списак резултата М23
Рад у међународном часопису
Број
7
Укупан
  1. M. Babic, D. Adamovic, S. Mitrovic, F. Zivic, D. Dzunic, M. Pantic, Wear Properties Of Shot Peened Surfaces Of 36NiCrMo16 Alloyed Steels Under Lubricated Condition, Journal of Balkan tribological association, Vol.18, No.4, pp. 566-576, ISSN 1310-4772, Doi 930/06.12.2011, 2012
    2012 JBTA - Wear Properties of Shot Peened Surfaces of 36NiCrMo16 Alloyed Steels.pdf
  2. S. Mitrovic, M. Babic, F. Zivic, I. Bobic, M. Eric, D. Dzunic, M. Pantic, Influence of Al2O3 Particle Content on the Sliding Wear Behaviour of ZA-27 Alloy Composites, Journal of the Balkan Tribological Association, Vol.18, No.4, pp. 548-558, ISSN 1310-4772, 2012
    2012 JBTA - Influence of Al2O3 Particle Content on the Sliding Wear Behaviour of ZA-27.pdf
  3. B. Jeremic, D. Vukelic, P. M. Todorovic, I. Macuzic, M. Pantic, D. Dzunic, B. Tadic, Static Friction at High Contact Temperatures and Low Contact Pressure, Journal of Friction and Wear, Vol.34, No.2, pp. 146–153, ISSN 1068-3666, 2013
    2013 JFW - Static Friction at High Contact Temperatures and Low Contact Pressure.pdf
  4. Djordje Vukelic, Dragomir Miljanic, Sasa Randjelovic, Igor Budak, Dragan Dzunic, Milan Eric, Marko Pantic, A BURNISHING PROCESS BASED ON THE OPTIMAL DEPTH OF WORKPIECE PENETRATION, Materials and technology, Vol.47, No.1, pp. 43–51, ISSN 1580-2949, 2013
    2013 MT - A Burnishing Process Based on the Optimal Depth of Workpiece Penetration.pdf
  5. M. ERIC, M. BABIC, S. MITROVIC, B. TADIC, D. DZUNIC, CONVERSION OF DATA INTO INFORMATION IN TRIBOLOGY RESEARCH, Journal of the Balkan Tribological Association, Vol.20, No.1, pp. 49-63, ISSN 1310-4772, 2014
  6. Dušan Arsić, Vukić Lazić, Slobodan Mitrović, Dragan Džunić, Srbislav Aleksandrović, Milan Djordjević, Branislav Nedeljković, Tribological behavior of four types of filler metals for hard facing under dry conditions, Industrial Lubrication and Tribology, Vol.68, No.6, pp. 729-736, ISSN 0036-8792, Doi 10.1108/ILT-10-2015-0156, 2016
  7. S. Mitrović, D. Adamović, F. Živić, D. Džunić, M. Pantić, D. Jevremović, Dry sliding wear behavior of PVD TiN coatings for cold forming tools, Journal of the Balkan Tribological Association, Vol.22, No.1, pp. 292-300, ISSN 1310-4772, Doi 1084/29.11.2013, 2016
Списак резултата М24
Рад у часопису међународног значаја верификованог посебном одлуком
Број
8
Укупан
  1. S. Mitrović, M. Babić, B. Stojanović, N. Miloradović, M. Pantić, D. Džunić, Tribological Potential of Hybrid Composites Based on Zinc and Aluminium Alloys Reinforced with SiC and Graphite Particles, Tribology in Industry, Vol.34, No.4, pp. 177-185, ISSN 0354-8996, 2012
  2. S. Mitrović, M. Babić, D. Adamović, F. Živić, D. Džunić, M. Pantić, Wear Behaviour of Hard Cr Coatings for Cold Forming Tools Under Dry Sliding Conditions, Tribology in Industry, Vol.34, No.1, pp. 44-48, ISSN 0354-8996, 2012
  3. A. Vencl, B. Gligorijević, B. Katavić, B. Nedić, D. Džunić, Abrasive Wear Resistance of the Iron- and WC-based Hardfaced Coatings Evaluated with Scratch Test Method, Tribology in Industry, Vol.35, No.2, pp. 123-127, ISSN 0354-8996, 2013
  4. M. Babić, B. Stojanović, S. Mitrović, I. Bobić, N. Miloradović, M. Pantić, D. Džunić, Wear Properties of A356/10SiC/1Gr Hybrid Composites in Lubricated Sliding Conditions, Tribology in Industry, Vol.35, No.2, pp. 148-154, ISSN 0354-8996, 2013
  5. S. Mitrović, M. Babić, N. Miloradović, I. Bobić, B. Stojanović, D. Džunić, M. Pantić, Wear Characteristics of Hybrid Composites Based on Za27 Alloy Reinforced With Silicon Carbide and Graphite Particles, Tribology in Industry, Vol.36, No.2, pp. 204-210, ISSN 0354-8996, 2014
  6. D. Džunić, S. Mitrović, M. Babić, I. Bobić, M. Pantić, D. Adamović, B. Nedeljković, Nanoindentation of Za-27 Alloy Based Nanocomposites Reinforced with Al2O3 Particles, Tribology in Industry, Vol.37, No.4, pp. 413-420, ISSN 0354-8996, 2015
  7. M. Pantić, S. Mitrović, M. Babić, D. Jevremović, T. Kanjevac, D. Džunić, D. Adamović, AFM Surface Roughness and Topography Analysis of Lithium Disilicate Glass Ceramic, Tribology in Industry, Vol.37, No.4, pp. 391-399, ISSN 0354-8996, 2015
  8. I. Peko, B. Nedić, A. Đorđević, D. Džunić, M. Janković, I. Veža, Modeling of Surface Roughness in Plasma Jet Cutting Process of Thick Structural Steel, Tribology in Industry, Vol.38, No.4, pp. 522-529, ISSN 0354-8996, 2016
Списак резултата М33
Саопштење са међународног скупа штампано у целини
Број
22
Укупан
  1. M. Babic, D. Adamovic, S. Mitrovic, F. Živic, D. Dzunic, Wear Properties of shot peened Surfaces Of 36NiCrMo16 Alloyed Steels Under Lubricated Condition, 7th BalkanTrib International Conference, Solun, Greece, 2011, 3.-5. Oct, pp. 69-76, ISBN 978-960-98780-6-7
  2. M. Babić, S. Mitrović, D. Adamović, D. Džunić, F. Živić, The Effect of Shot Peening on Tribological Behavior of Alloyed Steels, International Conferences on Shot Peening, ICSP-11, USA, 2011
  3. Miroslav Babić, Dragan Adamović, Slobodan Mitrović, Fatima Živić, Dragan Džunić, Marko Pantić, Tribological Properties of Shot Peened Surfaces of 36NiCrMo16 Alloyed Steels in Dry Sliding Condition, 12th International Conference on Tribology, Serbiatrib '11, Kragujevac, Serbia, 2011, 11 – 13 May, pp. 168-173, ISBN 978-86-86663-74-0
  4. Mitrovic, M. Babic, F. Zivic, I. Bobic, D. Dzunic, Influence Of Al2o3 Particle Content On The Sliding Wear Behaviour Of Za-27 Alloy Composites, 7th BalkanTrib International Conference, Solun, Greece, 2011, 3.-5. Oct, pp. 59-67, ISBN 978-960-98780-6-7
  5. S.Mitrović, M. Babić, D. Adamović, F. Živić, D. Džunić, M. Pantić, Wear Behaviour Of Cr Hard Coatings For Cold Forming Tools Under Dry Sliding Conditions, 34th International Conference On Production Engineering, Niš, Serbia, 2011, September 28-30, pp. 519-522, ISBN 978-86-6055-019-6
  6. Slobodan Mitrović, Miroslav Babić, Dragan Adamović, Fatima Živić, Dragan Džunić, Marko Pantić, Wear Behaviour of TiN Coatings for Cold Forming Tools under Dry Sliding Conditions, 12th International Conference on Tribology - Serbiatrib '11, Kragujevac, Serbia, 2011, 11 – 13 May, pp. 174-180, ISBN 978-86-86663-74-0
  7. Slobodan MITROVIĆ, Miroslav BABIĆ, Dragan ADAMOVIĆ, Fatima ŽIVIĆ, Dragan DŽUNIĆ, Marko PANTIĆ, WEAR AND FRICTION PROPERTIES OF SHOT PEENED SURFACES OF 36CRNIMO4 AND 36NICRMO16 ALLOYED STEELS UNDER DRY AND LUBRICATED CONTACT CONDITIONS, BULTRIB '12, Sofia, Bulgaria, 2012, 18-20.10.2012.
  8. Slobodan MITROVIĆ, Nenad MILORADOVIĆ, Miroslav BABIĆ, Ilija BOBIĆ, Blaža STOJANOVIĆ, Dragan DŽUNIĆ, WEAR BEHAVIOUR OF HYBRID ZA27/SIC/GRAPHITE COMPOSITES UNDER DRY SLIDING CONDITIONS, BULTRIB '12, Sofia, Bulgaria, 2012, 18-20.10.2012.
  9. Aleksandar Vencl, Bojan Gligorijević, Boris Katavić, Bogdan Nedić, Dragan Džunić, ABRASIVE WEAR RESISTANCE OF THE IRON- AND WC-BASED HARDFACED COATINGS EVALUATED WITH SCRATCH TEST METHOD, 13th International Conference on Tribology - SERBIATRIB'13, Kragujevac, Serbia, 2013, 15-17 May, pp. 75-79, ISBN 978-86-86663-98-6
    2013 Serbiatrib13 - Abrasive Wear Resistance of the Iron- And Wc-Based Hardfaced Coatings.pdf
  10. Babić Miroslav, Stojanović Blaža, Mitrović Slobodan, Bobić Ilija, Miloradović Nenad, Pantić Marko, Džunić Dragan, WEAR PROPERTIES OF A356/10SiC/1Gr HYBRID COMPOSITES IN LUBRICATED SLIDING CONDITIONS, 13th International Conference on Tribology – SERBIATRIB ‘13, Kragujevac, Serbia, 2013, 15-17 May, pp. 129-134, ISBN 978-86-86663-98-6
    2013 Serbiatrib13 - Wear Properties Of Al10sic1gr Hybrid Composites In Lubricated Sliding.pdf
  11. Milentije Stefanović, Dragan Džunić, Vesna Mandić, Srbislav Aleksandrović, Dragan Adamović, Slobodan Mitrović, INCREASING OF TOOL LIFE FOR HOT FORGING USING SURFACE MODIFICATION, 13th International Conference on Tribology – SERBIATRIB ‘13, Kragujevac, Serbia, 2013, 15-17 May, pp. 261-264, ISBN 978-86-86663-98-6
    2013 Serbiatrib13 - Increasing of Tool Life for Hot Forging Using Surface Modification.pdf
  12. Slobodan Mitrović, Miroslav Babić, Ilija Bobić, Fatima Zivić, Dragan Dzunić, Marko Pantić, WEAR BEHAVIOUR OF COMPOSITES BASED ON ZA27 ALLOY REINFORCED WITH GRAPHITE PARTICLES, 13th International Conference on Tribology – SERBIATRIB‘13, Kragujevac, Serbia, 2013, 15-17 May, pp. 124-128, ISBN 978-86-86663-98-6
    2013 Serbiatrib13 - Wear Behaviour of Composites Based on Za27 Alloy.pdf
  13. Slobodan Mitrović, Miroslav Babić, Nenad Miloradović, Ilija Bobić, Blaža Stojanović, Dragan Džunić, WEAR CHARACTERISTICS OF HYBRID COMPOSITES BASED ON ZA27 ALLOY REINFORCED WITH SILICON CARBIDE AND GRAPHITE PARTICLES, 13th International Conference on Tribology – SERBIATRIB‘13, Kragujevac, Serbia, 2013, 15-17 May, pp. 141-146, ISBN 978-86-86663-98-6
    2013 Serbiatrib13 - Wear Characteristics of Hybrid Composites Based on Za27 Alloy.pdf
  14. 14. M. Pantić, S. Mitrović, M. Babić, D. Jevremović, D. Džunić, F. Živić, D. Adamović, АFM surface roughness and topography analysis of lithium disilicate glass ceramic, 14th International Conference on Tribology - SERBIATRIB ‘15, Belgrade, Serbia, 2015, 13 – 15 May, pp. 514-521, ISBN 978-86-7083-857-4
  15. 15. D. Džunić, S. Mitrović, M. Babić, I. Bobić, M. Pantić, D. Adamović, B. Nedeljković, Nanoindentation of ZA27 alloy based nanocomposites reinforced with Al2O3 particles, 14th International Conference on Tribology - SERBIATRIB ‘15, Belgrade, Serbia, 2015, 13 – 15 May, pp. 73-80, ISBN 978-86-7083-857-4
  16. I. Macuzic, S. Mitrovic, B. Stojanovic, D. Dzunic, R. Janjic, M. Bukvic, Z. Ilic, Measuring cleaning class of oil after tribological testing, 7th International Scientific Conference on Defensive Technologies OTEH 2016, Serbia, 2016, pp. 630-635, ISBN 978-86-81123-82-9
  17. A. Đorđević, M. Erić, M. Pantić, D. Džunić, M. Stefanović, S. Mitrović, PO SSIBILITIES OF ARTIFICIAL NEURAL NETWORK APPLICATION IN BIOTRIBOLOGICAL RESEARCH, 15th International Conference on Tribology – SERBIATRIB ‘17, Kragujevac, Serbia, 2017, 17-19 May, pp. 589-599, ISBN 978‐86‐6335‐041‐0
  18. D. Adamovic, M. Živković, T. Vujinović, S. Mitrović, J. Živković, D. Džunić, DA MAGE AND DESTRUCTION OF WORKPIECE AND TOOL SURFACES IN IRONING PROCESS, 15th International Conference on Tribology – SERBIATRIB ‘17, Kragujevac, Serbia, 2017, 17-19 May, pp. 388-393, ISBN 978‐86‐6335‐041‐0
  19. D. Džunić, M. Babić, S. Mitrović, M. Pantić, I. Bobić, M ICRO SCRATCH TEST CHARACTERISATION OF ZA-27/SiC NANOCOMPOSITES, 15th International Conference on Tribology – SERBIATRIB ‘17, Kragujevac, Serbia, 2017, 17-19 May, pp. 75-83, ISBN 978‐86‐6335‐041‐0
  20. I. Peko, B. Nedić, A. Đorđević, S. Đurić, D. Džunić, I. Veža, M. Janković, PR EDICTION OF SURFACE ROUGHNESS IN PLASMA JET CUTTING PROCESS USING NEURAL NETWORK MODEL, 15th International Conference on Tribology – SERBIATRIB ‘17, Kragujevac, Serbia, 2017, 17-19 May, pp. 520-525, ISBN 978‐86‐6335‐041‐0
  21. M. Pantić, S. Mitrović, M. Babić, D. Jevremović, T. Kanjevac, D. Dzunić, D. Adamović, M ICRO SCRATCH BEHAVIOUR OF LITHIUM DISILICATE GLASS CERAMIC AFTER GLAZING TREATMENT, 15th International Conference on Tribology – SERBIATRIB ‘17, Kragujevac, Serbia, 2017, 17-19 May, pp. 645-651, ISBN 978‐86‐6335‐041‐0
  22. S. Milojević, D. Džunić, D. Taranović, R. Pešić, S. Mitrović, TR IBOLOGICAL REINFORCEMENTS FOR CYLINDER LINER OF ALUMINUM - EXAMPLE COMPRESSORS FOR BRAKE SYSTEMS OF TRUCKS AND BUSES, 15th International Conference on Tribology – SERBIATRIB ‘17, Kragujevac, Serbia, 2017, 17-19 May, pp. 251-257, ISBN 978‐86‐6335‐041‐0
Списак резултата М36
Уређивање зборника саопштења међународног научног скупа
Број
1
Укупан
  1. Slobodan Mitrović, Dragan Džunić, Marko Pantić, Tehnički urednik - Proceedings, Proceedings, 13th International Conference on Tribology, SERBIATRIB '13, 13th International Conference on Tribology, SERBIATRIB '13, Kragujevac, Srbija, 2013, 15-17.05., pp. 1-455, ISBN 978-86-86663-98-6
Списак резултата М51
Рад у водећем часопису националног значаја
Број
1
Укупан
  1. Mitrovic Slobodan, Babic Miroslav, Zivic Fatima, Bobic Ilija, Dzunic Dragan, Nanotribology investigations of composites based on Za-27 alloy reinforced by Al2O3 particles, Tribology in Industry, Vol.30, No.1&2, pp. 33-39, ISSN 0354-8996, 2008
Списак резултата М55
Уређивање научног часописа националног значаја (на годишњем нивоу)
Број
2
Укупан
  1. D. Džunić, Editorial Assistant, Tribology in Industry, Vol.35, No.1, 2, 3, 4, pp. 0-357, ISSN 0354-8996, 2013
  2. D. Džunić, Editorial Assistant, Tribology in Industry, Vol.36, No.1, 2, 3, 4, pp. 0-487, ISSN 0354-8996, 2014

УЧЕШЋЕ НА ПРОЈЕКТИМА РЕСОРНОГ МИНИСТАРСТВА
  1. Технолошки раѕвој 14005 - Развој напредне опреме за трибодијагностику и ММС на бази лаких метала
  2. Технолошки раѕвој 35021 - Развој триболошких микро/нано двокомпонентних и хибридних самоподмазујућих композита

РЕЗУЛТАТИ ПЕДАГОШКОГ РАДА
  1. Машински материјали, На матичном факултету, 2008-2015
  2. Основе предузетничког менаџмента и економије, На матичном факултету, 2008-2014
  3. Основи трибологије, На матичном факултету, 2008-2015
  4. Предуѕетништво, На матичном факултету, 2008-2015
  5. Трибомеханички системи, На матичном факултету, 2011/2012, 2012/2013
  6. Предузетнички процес - мастер студије, На матичном факултету, 2008-2014
  7. Предузетнички процес - Једногодишњи мастер, На матичном факултету, 2011-2014
  8. Машински материјали - Урбано инжењерство, На матичном факултету, 2014

УЧЕШЋЕ НА МЕЂУНАРОДНИМ ПРОЈЕКТИМА
  1. TEMPUS PROJECT, Conversion Courses for Unemployed University Graduates in Serbia, 145009-TEMPUS-2008- RS-JPHES
  2. TEMPUS PROJECT, Development of lifelong learning framework in Serbia, 145010-TEMPUS-2008-RS-JHPES
  3. RSEDP2, "Automotive Training Centre for Central Serbia (ATC Serbia), RS-2010-AQA-2708383261LEF", Машински факултет у Крагујевцу.

УЧЕШЋЕ У РАЗВОЈУ ДЕЛАТНОСТИ ВИСОКОГ ОБРАЗОВАЊА, НАУЧНОИСТРАЖИВАЧКОГ, ОДНОСНО, УМЕТНИЧКОГ СТВАРАЛАШТВА И РАДУ ПОСЛОВОДНИХ И СТРУЧНИХ ОРГАНА И ОРГАНИЗАЦИЈА
  1. Члан Комисије за промоцију Факултета, На матичном факултету, 2012, 2013, 2014 -
  2. Члан СРПСКОГ ТРИБОЛОШКОГ ДРУШТВА, На нивоу републике или локалне самоуправе, 2011 -