FACULTY OF ENGINEERING KRAGUJEVAC
UNIVERSITY KRAGUJEVAC
CURRICULUM VITAE
Nenad Marjanovic

GENERAL INFORMATION
First and last nameNenad Marjanovic
Year and place of birth1961., Gornji Milanovac
PositionFull professor
E-mailnesam@kg.ac.yu
Education-scientific / education–art fieldTechnical Technological Sciences
University, faculty, organizational unitUniversity of Kragujevac Faculty of Engineering Kragujevac
Field and closer specialtyMechanical engineering, Machine construction and mechanization

EDUCATION – DIPLOMAS
BACHELOR STUDIES
Year1985
PlaceKragujevac
InstitutionFaculty of Mechanical Engineering, Ubiversity of Kragujevac
HeadlineOptimization of mechanical structures
FieldMachine construction and mechanization
MSC THESIS
Year1992
PlaceKragujevac
InstitutionFaculty of Mechanical Engineering, Ubiversity of Kragujevac
HeadlineOptimization of multistage gears with cylindrical evolving gears
FieldMachine construction and mechanization
PHD THESIS
Year1997
PlaceKragujevac
InstitutionFaculty of Mechanical Engineering, Ubiversity of Kragujevac
HeadlineOptimization of gear power transmissions with permanent position of shaft axes
FieldMachine construction and mechanization

TECHNICAL BIOGRAPHY – POSITIONS
YearInstitutionPosition
1986Research & teaching аssistant prentice
1993Research & teaching assistant
1998Assistant professor
2003Associate professor
2007Full professor

PROFESSIONAL BIOGRAPHY - IMPROVEMENTS
YearInstitutionDuration
2005
2005
2006
2007
2014
2014
2016

AWARDS AND RECOGNITIONS
YearName of award/recognition
1985

RESULTS OF SCIENTIFIC AND RESEARCH WORK
Papers published in international scientific journals
  1. Blagojevic M., Marjanovic N., Djordjevic Z., Stojanovic B., Disic A., A New Design of a Two-Stage Cycloidal Speed Reducer, JOURNAL OF MECHANICAL DESIGN, Vol.133, No.8, pp. 085001-1-085001-7, ISSN 1050-0472, Doi http://dx.doi.org/10.1115/1.4004540, 2011
  2. Marjanovic N., Isailovic B., Marjanovic V., Milojevic Z., Blagojevic M., Bojic M., A Practical Approach to the Optimization of Gear Trains with Spur Gears, Mechanism and Machine Theory, Vol.53, No.1, pp. 1-16, ISSN 0094-114, Doi doi:10.1016/j.mechmachtheory.2012.02.004, 2012
  3. Milorad Bojic, Nenad Marjanovic, Ivan Miletic, Ljubisa Bojic, Comparison of optical performances of sea-shell trough solar concentrators, Energy and Buildings, Vol.98, No.1, pp. 144 - 150, ISSN 0378-7788, 2015
  4. Тадић, Б., Марјановић, Н., Design of Modern Universal Tribometer TPD-2000, Journal of the Balcan Tribological Association, Vol.13, No.2, pp. -, ISSN 1310-4772, Doi -, 2007
  5. Ивковић Б., Марјановић Н., Fernandez B., Ecotribology - Disk-on-disk Test Of Gear Lubricants Properties, JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, Vol.15, No.3, pp. 447-453, ISSN 1310-4772, 2009
  6. N. Marjanovic, B. Ivkovic, M. Blagojevic, B. Stojanovic, EXPERIMENTAL DETERMINATION OF FRICTION COEFFICIENT AT GEAR DRIVES, Journal of the Balkan Tribological Association, Vol.16, No.4, pp. 517 - 526, ISSN 1310-4772, 2010
  7. Stojanovic B., Miloradovic N., Marjanovic N., Blagojevic M. Marinkovic A., Wear of Timing Belt Drives, JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, Vol.17, No.2, pp. 206-201, ISSN 1310-4772, 2011
  8. Stojanovic B., Tanasijevic S., Marjanovic N., Ivanovic L., Blagojevic M., Wear as the Criterion of Mechanical Transmitters Working Life, JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, Vol.17, No.2, pp. 215-222, ISSN 1310-4772, 2011
  9. Stojanovic Blaza, Miloradovic Nenad, Marjanovic Nenad, Blagojevic Mirko , Ivanovic Lozica, Length Variation of Toothed Belt during Exploitation, STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, Vol.57, No.9, pp. 648-654, ISSN 0039-2480, 2011
  10. Blagojevic M., Kocic M, Marjanovic N., Stojanovic B., Djordjevic Z., Ivanovic L., Marjanovic V., INFLUENCE OF THE FRICTION ON THE CYCLOIDAL SPEED REDUCER EFFICIENCY, Journal of the Balkan Tribological Association, Vol.18, No.2, pp. 217 - 227, ISSN 1310-4772, 2012
  11. Stojanovic B., Babic M., Marjanovic N., Ivanovic L., Ilic A., Tribomechanical Systems in Mechanical Power Transmitters, JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, Vol.18, No.4, pp. 497-506, ISSN 1310-4772, 2012
  12. Marjanovic V., Bojic M. Marjanovic N., Skerlic J., Solar ray transfer inside sea-shell stationary trough solar concentrator, JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, Vol.5, No.4, pp. 041811-l, ISSN 1941-7012, 2013
  13. Blagojevic M., Marjanovic N., Djordjevic Z., Stojanovic B., Marjanovic V., Vujanac R., Disic A., Numerical and Experimental Analasys of Cyclo Disc Stress State, TEHNICKI VJESNIK – TECHNICAL GAZETTE, Vol.21, No.2, pp. 377-3823, ISSN 1330-3651, 2014
  14. M. Blagojevic, N. Marjanovic, Z. Djordjevic, B. Stojanovic, V. Marjanovic, R. Vujanac, A. Disic,, NUMERICAL AND EXPERIMENTAL ANALYSIS OF THE CYCLOID DISC STRESS STATE, Technical Gazette, Vol.5, No.4, pp. 377 - 382, ISSN 1330-3651, 2014
  15. M.Blagojevic, M.Matejic, N.Kostic, N.Petrovic, N.Marjanovic, B.Stojanovic, THEORETICAL AND EXPERIMENTAL TESTING OF PLASTIC CYCLOID REDUCER EFFICIENCY IN DRY CONDITIONS, Journal of the Balkan Tribological Association, Vol.23, No.2, pp. 367-375, ISSN 1310-4772, 2017
  16. N.Kostic, M.Blagojevic, N.Petrovic, M.Matejic, N.Marjanovic, DETERMINATION OF REAL CLEARANCES BETWEEN CYCLOIDAL SPEED REDUCER ELEMENTS BY THE APPLICATION OF HEURISTIC OPTIMIZATION, Transactions of FAMENA, Vol.42, No.1, pp. 15-26, ISSN 1333-1124, 2018
  17. Nenad Petrović, Vesna Marjanović, Nenad Kostić, Nenad Marjanović, Mircea Viorel Dragoi, MEANS AND EFFECTS OF CONSTRAINING THE NUMBER OF USED CROSS-SECTIONS IN TRUSS SIZING OPTIMIZATION, TRANSACTIONS OF FAMENA, impact factor: 0.58, Vol.44, No.3, pp. 35-46, ISSN 1333-1124, Doi 10.21278/TOF.44303, 2020
  18. N.Petrovic, N.Marjanovic, N.Kostic, M.Blagojevic, M.Matejic, S.Troha, EFFECTS OF INTRODUCING DYNAMIC CONSTRAINTS FOR BUCKLING TO TRUSS SIZING OPTIMIZATION PROBLEMS, FME Transactions, Vol.46, No.1, pp. 117-123, ISSN 1451-2092, 2018
  19. M. Matejić, M. Blagojević, N. Kostić, N. Petrović, N. Marjanović, nalysis of New Two-Stage Cycloid Drive Concept, Tribology in Industry, Vol.42, No.2, pp. 337-344, ISSN 0354-8996, Doi 10.24874/ti.880.05.20.06, 2020
Papers presented at international conferences
  1. Vojislav Miltenović, Nenad Marjanović, DEVELOPMENT OF INNOVATIVE AND SMART PRODUCTS (KEYNOTE LECTURE), 9th International Scientific Conference [on] Research and Development of Mechanical Elements and Systems, IRMES 2019, Kragujevac, 2019, 5-7. 9., pp. 30-31, ISBN 978‐86‐6335‐061‐8
  2. Марјановић Н., Јовичић С., Један приступ оптимизацији преносника са цилиндричним зупчаницима, VII симпозијум МВМ, Крагујевац, 1992, -, pp. 333-343, ISBN -
  3. Марјановић Н.,, Избор оптималног преносног односа главног преносника применом метода математичког програмирања,, VIII симпозијум МВМ, Крагујевац, 1994, -, pp. 219 – 225, ISBN -
  4. Бојић М., Стојановић Д., Јевтовић Д., Марјановић Н., Optimization of an Energy System Having a Ondensung Turbine with Stream Exstraction, International Syposium of Tremotehnics, Thermal Machines and Road Vehicles, Timosoara, 1996, -, pp. 45 – 50, ISBN -
  5. Јовичић С., Стојковић С., Ћатић Д., Марјановић Н, Прорачун поузданости торзионих вратила са аспекта квалитета, 26. Међународно саветовање производног машинства Југославије, Будва, 1996, -, pp. 459 – 464, ISBN -
  6. Марјановић Н., Јовичић С., Новаковић Љ, Вишекритеријумска оптимизација сложених техничких система на примеру зупчастих преносника снаге, XXIII Симпозијум за Оперaциона истраживања, Златибор, 1996, -, pp. 885 – 888, ISBN -
  7. Марјановић Н., Николић В., Примена методе комплекса у оптимизацији зупчастих преносника снаге, I међународни сипозијум “Индустријско инжењерство”, SIE`96,, Београд, 1996, -, pp. 495 - 497, ISBN -
  8. Николић В., Марјановић Н.,, Анализа утицаја параметара на вредност напона у подножју зупца зупчаника, I међународни сипозијум “Индустријско инжењерство,SIE`96, Београд, 1996, -, pp. 492 - 494, ISBN -
  9. Николић Р., Марјановић В., Николић И., Марјановић Н., Mathematical Modeling of Dynamic Behavior of a Rotor Cantaining a Crack, EUROMEH 2nd European Oscillations Conference, Prague, 1996, -, pp. 165 – 168, ISBN -
  10. Тадић Б., Ивковић Б., Марјановић Н., Тодоровић П., Симулација процеса трења и хабања зупчастих преносника на трибометру ТПД 2000, Седма југословенска конференција о трибологији са међународним учешћем YUTRIB 2001, -, 2001, -, pp. 5-10, ISBN -
  11. Јовичић С., Марјановић Н., Фазе интегралног развоја производа, Научно стручни скуп Истраживање и развој машинских елемената и системa - Jahorina IRMES 2002, Јахорина, 2002, -, pp. 51 – 57, ISBN -
  12. Адамовић Д., Стефановић М., Лазић В., Живковић М., Марјановић Н., Influence of Tribological Conditions onto the Friction Coefficient at Multiphase Ironing, 5th International Conference „Research and Development in Mechanical Industry, RaDMI 2005, Врњачка Бања, 2005, -, pp. 305. – 310, ISBN -
  13. Благојевић М., Николић Станојевић В., Марјановић Н., Одређивање еквивалентног радијуса кривине у тренутној тачки додира зупца циклозупчаника и ваљка централног зупчаника циклоредуктора, VII међународни научно-стручни скуп о достигнућима електро и машинске индустрије, DEMI 2005, Бања Лука, 2005, -, pp. 89. – 94, ISBN -
  14. Taдић, Б., Старчевић, Б., Марјановић, Н., Tribological and Economical Aspects of Dealing with Fixturing Tools, 10. th International Conference on Tribology SERBIATRIB ’07, Kragujevac, 2007, -, pp. 129 – 133., ISBN -
  15. Благојевић М., Марјановић Н., Расподела оптерећења код двостепеног циклоредуктора нове концепције, VIII међународни научно-стручни скуп о достигнућима електро и машинске индустрије, DEMI 2007, Бања Лука, 2007, -, pp. 51. – 56, ISBN -
  16. Марјановић Н., Тадић Б., Ивковић Б., Митровић С., Design of Modern Concept Tribometer njith Circular and Reciprocating Movement, 10 th International Conference on Tribology SERBIATRIB ’07, Kragujevac, 2007, -, pp. 109 – 113, ISBN -
  17. Bojić M., Marjanović N., Miletić I, Mitić A., Stefanović V., Some Characteristics of Heat Production by Stationary Parabolic, Cylindrical Solar Concentrator, IASTED International Conference on Solar Energy (SOE 2009),, Phuket,Thailand, 2009, March 16, March 18, ISBN 978-0-88986-791-8
  18. Bojić M., Marjanović N., Miletić I., Efficiency of solar ray use by parabolic, cylindrical solar concentrator for heat production, 5th DUBROVNIK CONFERENCE ON SUSTAINABLE DEVELOPMET OF ENERGY WATER AND ENVIRONMENT SYSTEMS, Dubrovnik, Hrvatska, 2009, September 30 - October 3 2009, pp. 1-11, ISBN 978-953-6313-97-6
  19. Bojić М., Marjanović N., Miletić I., HEAT PRODUCTION BY STATIONARY PARABOLIC, CYLINDRICAL SOLAR CONCENTRATOR, ECOS 2009, 22nd International Conference on Efficiency, Cost, Optimization, Foz do Iguaçu, Paraná, Brasil, 2009, August 31 – September 3, 2009, pp. 1147 - 1152, ISBN 2175-5426
  20. Ivkovic B., Marjanovic N., Ravlic M., A New Concept of the Universal Tribometer, 11th international Conference on Tribology SERBIATRIB 09, Belgrade, 2009, May 13-15, pp. 286-289
  21. Бојић М., Марјановић Н., Милетић И, Митић А., Стефановић В.,, Some Characteristics of Heat Production by Stationary Parabolic, Cylindrical Solar Concentrator, IASTED International Conference on Solar Energy (SOE 2009), Phuket, Thailand, 2009, March 16 - 18, pp. 88-91
  22. Бојић М., Марјановић Н., Милетић И., Some Characteristics of Electricity Production by Stationary Parabolic, Cylindrical Solar Concentrator, Electromotion 2009 - 8th International Symposium on Advanced Electromechanical Motion Systems, Lille, France, 2009, July 1-3
  23. Blagojevic M. Marjanović N., Stojanović B., Đorđević Z., Kočić M., Influence of Friction on the Force Distribution at Cycloidal Speed Reducer, SERBIATRIB ‘11, 12th International Conference on Tribology, Kragujevac, 2011, pp. 226-229, ISBN 978-86-86663-74-0
  24. Ivkovic B., Marjanovic N., Ravlic M, THE INFLUENCE OF SLIP RATE ON FRICTION COEFFICIENT DURING SLIP/ROLL CONTACT, 7th International Conference on Tribology (BALKANTRIB’11), Thessaloniki, Greece, 2011, 3 - 5 October, pp. 271 - 274, ISBN 978-960-98780-6-7
  25. Stojanovic B., Tanasijevic S., Marjanovic N., Blagojevic M., Failure Analysis of the Timing Belt Drives, SERBIATRIB ‘11, 12th International Conference on Tribology, Kragujevac, 2011, pp. 210-215, ISBN 978-86-86663-74-0
  26. Blagojević M., Đorđević Z., Marjanović V., Marjanović N., Stojanović B., Vujanac R., STRESS AND STRAIN STATE OF CYCLOID DISC, 1st INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa 2012, East Sarajevo Jahorina, 2012, 28. - 30. Novembar, pp. 367 - 374, ISBN 978-99938-655-5-1
  27. Kostic N., Blagojevic M., Marjanovic V., Djordjevic Z., Marjanovic N., Uticaj korekcije profila ciklozupcanika na broj ostvarenih kontakata elemenata cikloreduktora, 1st INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa 2012, East Sarajevo, Jahorina, 2012, 28. - 30. novembar, pp. 339. - 346., ISBN 978-99938-655-5-1
  28. Marjanović N., Isailović B., Marjanović V., Kostić N., INTEGRISANI PRISTUP STRUKTURNOJ OPTIMIZACIJI U CAD SOFTVERU, 1st INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa 2012, East Sarajevo - Jahorina, 2012, 28. - 30. Novembat, pp. 213 - 220, ISBN 978-99938-655-5-1
  29. Kostic N., Matejic M., Blagojevic M., Djordjevic Z., Marjanovic N., Petrovic N., COMPARATIVE ANALYSIS OF DIFERENT TYPE REDUCERS FOR WINCH DRUM DRIVING UNIT, 7th International Quality Conference, Kragujevac, 2013, pp. 255-262, ISBN 978-86-86663-94-8
  30. Marjanović N., Kostić N., Blagojević M., Marjanović V., Isailović B., AUTOMATED GEAR TRAIN MODELING IN CAD ENVIRONMENT, 11 International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013, Banja Luka, 2013, May-June, 2013, pp. 107-110, ISBN 978‐99938‐39‐46‐0
  31. Matejic M., Blagojevic M., Djordjevic Z., Marjanovic N., Petrovic N., COMPARATIVE ANALYSIS OF DIFERENT TYPE REDUCERS FOR WINCH DRUM DRIVING UNIT, 7th International Quality Conference, Kragujevac, 2013, pp. 255-262, ISBN 978-86-86663-94-8
  32. Matejic M., Veljovic Lj., Marjanovic V., Blagojevic M., Marjanovic N., DYNAMIC BEHAVIOR OF PLANETARY GEARBOX NEW CONCEPT, 11th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013, Banja Luka, 2013, pp. 121-126, ISBN 978‐99938‐39‐46‐0
  33. Petrovic N., Blagojevic M., Marjanovic N., Matejic M., PARAMETRIC DRAWING OF A CYCLO DRIVE SHORTENED EQUIDISTANT EPITROCHOID GEAR, 7th International Quality Conference, Kragujevac, 2013, pp. 303-308, ISBN 978-86-86663-94-8
  34. Miloš Matejić, Milorad Bojić, Nenad Kostić, Nenad Marjanović, Mirko Blagojević, OPTIMIZATION OF GEOMETRIC PARAMETERS TO AUTOMATE SOLAR COLLECTOR DESIGN, 45. International Congress and Exhibition on Heating, Refrigeration and Air Conditioning (KGH), Beograd, 2014, ISBN 978-86-81505-75-5
  35. Mirko Blagojevic, Nenad Marjanovic, Nenad Petrovic, Milos Matejic, Milorad Bojic, MULTI CRITERIA OPTIMIZATION OF LOW-RISE DETACHED HOUSE HEATING SYSTEMS IN AN ATTEMPT TO MINIMIZE ENVIORMENTAL DAMAGE AND MAXIMIZE COFORT OF USE, 8th International Quality Conference, Kragujevac, 2014, pp. 427 - 432, ISBN 978-86-6335-004-5
  36. Mirko Blagojević, Nenad Petrović, Nenad Kostić, Nenad Marjanović, Miloš Matejić, PRODUCT DEVELOPMENT AT THE FACULTY OF ENGINEERING UNIVERSITY IN KRAGUJEVAC, 2nd International scientific conference, Conference on Mechanical Engineering Technologies and Applications (COMETa 2014), Jahorina, Bosna i Hercegovina, Republika Srpska, 2014, pp. 697 - 700, ISBN 978-99976-623-2-3
  37. Nenad Kostić, Nenad Petrović, Nenad Marjanović, Mirko Blagojević, Miloš Matejić, PARAMETRIC MODELING OF GEAR TRANSMISSIONS IN CAD SOFTWARE WITH DEFINABLE SHAFT AXIS POSITIONS, 2nd International scientific conference, Conference on Mechanical Engineering Technologies and Applications (COMETa 2014), Jahorina, Bosna i Hercegovina, Republika Srpska, 2014, pp. 515 - 520, ISBN 978-99976-623-2-3
  38. Miloš Matejić, Milorad Bojić, Nenad Petrović, Nenad Marjanović, Mirko Blagojević, COMPARATIVE ANALYSIS OF ALTERNATIVE SOLAR COLLECTORS FOR LOW-RISE HOUSING UNITS, 9th International Quality Conference, Kragujevac, 2015, June 2015, pp. 225 - 230
  39. Nenad Kostic, Nenad Petrovic, Milorad Bojic, Nenad Marjanovic, Dragan Cvetkovic, INFLUENCE OF OPTIMAL SYSTEM CHOICE ON ENERGY SAVING AND DECREASE OF NEGATIVE ENVIROMENT IMPACT, 9th International Quality Conference, Kragujevac, 2015, pp. 231 – 237
  40. Nenad PETROVIC, Milos MATEJIC, Nenad KOSTIC, Mirko BLAGOJEVIC, Nenad MARJANOVIC, Parametric Modeling of a Cycloid Drive Relative to Input Shaft Angle, The 3rd International Conference Mechanical Enguneering in XXI Centery, Niš, 2015, September 17-18, pp. 157-160
  41. Miloš Matejić, Mirko Blagojević, Zorica Đorđević, Nenad Marjanović, Nenad Petrović, COMPARATIVE ANALYSIS OF DIFERENT TYPE REDUCERS FOR WINCH DRUM DRIVING UNIT, 9th International Quality Conference, Kragujevac, 2016, pp. 225 – 230
  42. Nadica Stojanovic, Jasna Glisovic, Nenad Marjanovic, Ivan Grujic, OPTIMIZATION OF VENTILATED DISC BRAKE VANES FOR HEAVY DUTY VEHICLE, 3nd International scientific conference, Conference on Mechanical Engineering Technologies and Applications (COMETa 2016), Jahorina, Bosna i Hercegovina, Republika Srpska, 2016, pp. 155 – 162, ISBN 978-99976-623-7-8
  43. Nenad Kostić, Miloš Matejić, Nenad Petrovic, Mirko Blagojević, Nenad Marjanović, OPTIMIZATION OF SOLAR COLLECTOR GEOMETRIC PARAMETERS USING A HEURISTIC OPTIMIZATION METHODS, 47. International Congress and Exhibition on Heating, Refrigeration and Air Conditioning (KGH), Beograd, 2016, pp. 1 – 8, ISBN 978-86-81505-82-3
  44. Nenad Kostić, Nenad Marjanović , Nenad Petrovic, A NOVEL APPROACH FOR SOLVING GEAR TRAIN OPTIMIZATION PROBLEM, International Congress Motor Vehicles & Motors, Kragujevac, 2016, October 6th – 8th, pp. 133 -138, ISBN 978-86-6335-037-3
  45. Nenad Marjanovic, Nenad Kostic, Nenad Petrovic, Mirko Blagojevic, Milos Matejic, TEACHING-LEARNING-BASED OPTIMIZATION ALGORITHM FOR SOLVING MACHINE DESIGN CONSTRAINED OPTIMIZATION, 3nd International scientific conference, Conference on Mechanical Engineering Technologies and Applications (COMETa 2016), Jahorina, Bosna i Hercegovina, Republika Srpska, 2016, pp. 101 – 108, ISBN 978-99976-623-7-8
  46. M.Matejic, N.Petrovic, N.Kostic, M.Blagojevic, N.Marjanovic, FRICTION INFLUENCE REDUCING BY USING LENEAR BEARINGS AND BALL SCREW SHAFTS IN MINI-PLATFORMS, SERBIATRIB `17, Kragujevac, 2017
  47. N.Marjanovic, N.Kostic, N.Petrovic, M.Blagojevic, M.Matejic, A NEW MODIFICATION OF GENETIC ALGORITHM FOR SOLVING ENGINEERING OPTIMIZATION PROBLEMS, 8th International Scientific Conference IRMES 2017, Trebinje, Bosnia and Herzegovina, 2017, 7-9 septembar, pp. 153-156, ISBN 978-9940-527-53-2
  48. N.Marjanovic, N.Kostic, N.Petrovic, M.Blagojevic, M.Matejic, VOLUME OPTIMIZATION OF GEAR TRAINS WITH SPUR GEARS USING GENETIC ALGORITHM, 8th International Conference on Manufacturing Science and Education-MSE 2017, Sibiu, Romania, 2017, 7-9 jun, pp. 42, ISBN 2559-2963
  49. N.Petrovic, N.Marjanovic, N.Kostic, M.Blagojevic, SIZING OPTIMIZATION OF PARAMETRICALLY DESIGNED TRUSSES, 13th International Conference on Accomplishments in Mechanical and Industrial Engineering, Banja Luka BiH, 2017, 26-27 maj, pp. 93-100, ISBN 978-99938-39-72-9
  50. N. Kostić, N. Petrović, V. Marjanović, N. Marjanović, AUTOMATED SELECTION OF ANALYTICALLY CALCULATED GEARBOX CONCEPTS ACCORDING TO DIMENSIONAL CRITERIA, 7th International Congress Motor Vehicles & Motors 2018, Kragujevac, 2018, 4-5 oktobar, pp. 265-271, ISBN 978-86-6335-055-7
  51. N. Petrović, N. Kostić, N. Marjanović, A COMPARISON OF TRUSS STRUCTURAL OPTIMIZATION TYPES WITH AND WITHOUT BUCKLING DYNAMIC CONSTRAINTS, 4th International Scientific Conference, Conference on Mechanical Engineering Technologies and Applications (COMETa 2018), Jahorina, B&H, Republic of Srpska, 2018, 27-30 novembar, pp. 464-471, ISBN 978-99976-719-4-3
  52. Milos Matejic, Mirko Blagojevic, Ileana Ioana Cofaru, Nenad Kostic, Nenad Petrovic, Nenad Marjanovic, DETERMINING EFFICIENCY OF CYCLOID REDUCERS USING DIFFERENT CALCULATION METHODS, 9th International Conference on Manufacturing Science and Education – MSE 2019, Sibiu, Romania, 2019, 5-7 June
  53. Nenad Petrović, Nenad Kostić, Nenad Marjanović, Mirko Blagojević, Miloš Matejić, INFLUENCE OF BUCKLING ON TRUSS STRUCTURAL OPTIMIZATION, 14th International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI 2019, Banja Luka, 2019, pp. 415-422, ISBN 978-99938-39-85-9
  54. Nenad Petrović, Nenad Kostić, Nenad Marjanović, Ivan Miletić, PARTICLE SWARM SIZING OPTIMIZATION OF PLANAR TRUSS STRUCTURES WITH BUCKLING CONSTRAINTS, COMETa 2020 „Conference on Mechanical Engineering Technologies and Applications“, Istocno Sarajevo, RS, BIH, 2020, 26. - 28. 11., pp. 243-250, ISBN 978-99976-719-8-1
  55. N.Petrovic, N.Marjanovic, N.Kostic, M.Blagojevic, M.Matejic, EFFECTS ON INTRODUCTING DYNAMIC CONSTRAINTS FOR BUCKLING TO TRUSS SIZING OPTIMIZATION PROBLEMS, International Conference of Experimental and Numerical Investigations and New Technologies CNN 2017 Tech, Zlatibor, Serbia, 2017, 02-05 jul, pp. 145-148
  56. N. Petrović, N. Kostić, N. Marjanović, DISCRETE VARIABLE TRUSS STRUCTURAL OPTIMIZATION USING BUCKLING DYNAMIC CONSTRAINTS, International conference on Machine and Industrial Design in Mechanical Engineering, KOD 2018, Novi Sad, Serbia, 2018, 6-8 jun, pp. 46-47, ISBN ISBN 978-86-6022-059-4
  57. Nenad Petrović, Nenad Kostić, Nenad Marjanović, Jelena Živković, Ileana Ioana Cofaru, EFFECTS OF STRUCTURAL OPTIMIZATION ON PRACTICAL ROOF TRUSS CONSTRUCTION, 9th International Scientific Conference [on] Research and Development of Mechanical Elements and Systems, IRMES 2019, Kragujevac, 2019, 05-07. 09., pp. 30-31, ISBN 978‐86‐6335‐061‐8