ФАКУЛТЕТ ИНЖЕЊЕРСКИХ НАУКА
УНИВЕРЗИТЕТ У КРАГУЈЕВЦУ
CURRICULUM VITAE
Ненад Петровић

OСНОВНИ ПОДАЦИ
Име и презимеНенад Петровић
Година и место рођења1989, Крагујевац
ЗвањеАсистент
E-mailnpetrovic@kg.ac.rs
Образовно-научно / образовно-уметничко пољеТехничко технолошке науке
Универзитет, факултет, организациона јединицаУниверзитет у Крагујевцу, Факултет инжењерских наука
Област и ужа специјалностМашинско инжењерство, Машинске конструкције и механизација

СТРУЧНА БИОГРАФИЈА - ДИПЛОМЕ
ОСНОВНЕ СТУДИЈЕ
Година2010
МестоКрагујевац
ИнституцијаУниверзитет у Крагујевцу, Машински факултет
НасловПројектовање двостепеног редуктора
ОбластМашинске конструкције и механизација
МАГИСТАРСКА ТЕЗА
Година2012
МестоКрагујевац
ИнституцијаУниверзитет у Крагујевцу, Факултет инжењерских наука
НасловАнализа заморне чврстоће заварених спојева транспортних машина и уређаја
ОбластМашинске конструкције и механизација

СТРУЧНА БИОГРАФИЈА - ЗВАЊА
Година избораИнституцијаЗвање
2012Универзитет у Крагујевцу, Факултет инжењерских наукаИстраживач приправник
2015Универзитет у Крагујевцу, Факултет инжењерских наукаИстраживач сарадник
2015Универзитет у Крагујевцу, Факултет инжењерских наукаАсистент

СТРУЧНА БИОГРАФИЈА - УСАВРШАВАЊЕ
ГодинаИнституцијаТрајање
2012„RAPP Marine Group", Сијетл, САД - стручна пракса40 дана
2016Angel Kanchev University of Rousse, Русе, Бугарска27 дана
2016University of Chemical Technology and Metallurgy, Department of Applied Mechanics, Софија, Бугарска30 дана
2017Slovak University of Technology Bratislava, Faculty of Materials Science and Technology STU, Трнава, Словачка5 дана
2018University of Nyíregyháza, Engineering and Agriculture Faculty, Мађарска6 дана
2018ERASMUS+ Тренинг мобилност - Transilvania University of Brașov7 дана
2018Универзитет у Источном Сарајеву, Машински Факултет30 dana
2019ERASMUS+ Teacher Training Mobility - TAL TECH, Талин, Естонија5 дана

СТРУЧНА БИОГРАФИЈА - ОСТАЛО
Коаутор помоћног универзитетског уџбеника: 1. Ненад Марјановић, Ненад Костић, Ненад Петровић - Основи конструисања - Збирка задатака, Крагујевац, 2018.

НАУЧНО-ИСТРАЖИВАЧКИ РАД
Списак резултата М23
Рад у међународном часопису
Број
2
Укупан
  1. M. Blagojević, M. Matejić, N. Kostić, N. Petrović, N. Marjanović, B. Stojanović, THEORETICAL AND EXPERIMENTAL TESTING OF PLASTIC CYCLOID REDUCER EFFICIENCY IN DRY CONDITIONS, Journal of the Balkan Tribological Association, Vol.23, No.2, pp. 367-375, ISSN 1310-4772, 2017
  2. Nenad Kostić, Mirko Blagojević, Nenad Petrović, Miloš Matejić, Nenad Marjanović, DETERMINATION OF REAL CLEARANCES BETWEEN CYCLOIDAL SPEED REDUCER ELEMENTS BY THE APPLICATION OF HEURISTIC OPTIMIZATION, TRANSACTIONS OF FAMENA, Vol.42, No.1, pp. 15-26, ISSN 1333-1124, Doi 10.21278/TOF.42102, 2018
Списак резултата М24
Рад у часопису међународног значаја верификованог посебном одлуком
Број
1
Укупан
  1. Nenad Petrović, Nenad Marjanović, Nenad Kostić, Mirko Blagojević, Miloš Matejić, Sanjin Troha, Effects of Introducing Dynamic Constraints for Buckling to Truss Sizing Optimization Problems, FME Transactions, Vol.46, No.1, pp. 117-123, ISSN 1451-2092, 2018
Списак резултата М33
Саопштење са међународног скупа штампано у целини
Број
32
Укупан
  1. Miloš Matejić, Mirko Blagojević, Zorica Đorđević, Nenad Marjanović, Nenad Petrović, COMPARATIVE ANALYSIS OF DIFERENT TYPE REDUCERS FOR WINCH DRUM DRIVING UNIT, 7th International Quality Conference, Conference proceedings, Kragujevac, 2013, 24.05, pp. 255-262, ISBN 978-86-86663-94-8
  2. N. Petrović, M. Blagojević, Z. Đorđević, V. Marjanović, PARAMETRIC DRAWING OF A CYCLO DRIVE RELATIVE TO INPUT SHAFT ANGLE, 35th International Conference on Production Engineering, Kopaonik, Srbija, 2013, 25.-28.09., pp. 259-262, ISBN 978-86-82631-69-9
  3. Nenad Petrović, Mirko Blagojević, Nenad Marjanović, Miloš Matejić, PARAMETRIC DRAWING OF A CYCLO DRIVE SHORTENED EQUIDISTANT EPITROCHOID GEAR, 7th International Quality Conference, Conference proceedings, Kragujevac, 2013, 24. 05, pp. 303-308, ISBN 978-86-86663-94-8
  4. Dobrivoje Ćatić, Nenad Petrović, Jasna Glišović, Jasmina Miković, Sandra Veličković, PROGRAM SUPPORT FOR RELIABILITY ALLOCATION FROM A STANDPOINT OF TECHNICAL REQUIREMENTS, International Quality Conference, Kragujevac, 2014, ISBN 978-86-6335-004-5
  5. M. Blagojević, N. Petrović, N. Kostić, M. Matejić, N. Marjanović,, PRODUCT DEVELOPMENT AT THE FACULTY OF ENGINEERING UNIVERSITY IN KRAGUJEVAC, THE 2nd INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa2014, Jahorina, B&H, 2014, pp. 697-700, ISBN 978-99976-623-2-3
  6. Miloš Matejić, Dobrivoje Ćatić, Nenad Petrović, Sandra Veličković, Jasmina Miković, BELT CONVEYER ANALYSIS USING FAULT TREE ANALYSIS METHOD, International Quality Conference, Kragujevac, 2014, ISBN 978-86-6335-004-5
  7. Miloš Matejić, Lozica Ivanović, Nenad Petrović, Nenad Kostić, Determination of the most influential factor during the rope winding process around winch drums using Taguchi method, 8th INTERNATIONAL CONFERENCE ON TRIBOLOGY, Romania, 2014, 30.10 - 01.11, pp. 794-798, ISBN 978-973-719-570-8
  8. Miloš Matejić, Lozica Ivanović. Nenad Petrović, ADOPTION OF OPTIMAL TEETH PARAMETERS OF GEROTOR PUMP, International conference COMETa 2014, East Sarajevo, Republic of Serbia, Bosnia & Herzegovina, 2014, 02.-05. 12., pp. 505-512, ISBN 978-99976-623-2-3
  9. Miloš Matejić, Mirko Blagojević, Nenad Petrović, Dragan Cvetković, Milorad Bojić, INFLUENCE OF THE MEANS, INTENSITY AND POSSIBILITIES OF EXPLOATING LOW-RISE BUILDINGS ON ENERGY SAVINGS AND RESULTS OF THEIR OPTIMIZATION, International Quality Conference, Kragujevac, 2014, 23.05, pp. 761-766, ISBN 978-86-6335-004-5
  10. Mirko Blagojević, Zorica Đorđević, Miloš Matejić, Nenad Kostić, Nenad Petrović, DYNAMIC MODEL OF CYCLOIDAL SPEED REDUCER, International Congress Motor Vehicles & Motors 2014, Kragujevac, 2014, ISBN 978-86-6335-010-6
  11. Nenad Kostić, Nenad Petrović, Nenad Marjanović, Mirko Blagojević, Miloš Matejić, PARAMETRIC MODELING OF GEAR TRANSMISSIONS IN CAD SOFTWARE WITH DEFINABLE SHAFT AXIS POSITIONS, 2nd Iternational conference COMETa 2014, East Sarajevo, Republic of Srpska, Bosnia and Herzegovina, 2014, ISBN 978-99976-623-2-3
  12. Nenad Kostić,Milorad Bojić,Miloš Matejić, Nenad Pertović, Vesna Marjanović, BENEFITS OF OPTIMIZING LOW-RISE BUILDINGS, 45th INTERNATIONALCONGRESS & EXHIBITIONON HEATING, REFRIGERATIONAND AIR CONDITIONING, Belgrade, 2014, ISBN 978-86-81505-75-5
  13. Vesna Marjanovic, Gordana Bogdanovic, Nenad Kostic, Nenad Petrovic, OPTIMIZATION OF LOW-RISE BUILDING GEOMETRICAL FORMS IN DESIGN BUILDER, 8. International Quality Conference (8th IQC), Center for Quality, Faculty of Engineering, Kragujevac, Serbia, 2014, 23.05., pp. 433-438, ISBN 978-86-6335-004-5
  14. Zorica Đorđević, Jovana Rasić, Mirko Blagojević, Miloš Matejić, Nenad Petrović, TRUCK SUPPORTIVE CHASSIS STRUCTURAL STATIC ANALYSIS, International Quality Conference, Kragujevac, 2014, ISBN 978-86-6335-010-6
  15. Мирко Благојевић, Ненад Марјановић, Ненад Петровић, Милош Матејић, Милорад Бојић, MULTI CRITERIA OPTIMIZATION OF LOW-RISE DETACHED HOUSE HEATING SYSTEMS IN AN ATTEMPT TO MINIMIZE ENVIORMENTAL DAMAGE AND MAXIMIZE COFORT OF USE, International Quality Conference, Крагујевац, 2014, ISBN 978-86-6335-004-5
  16. Miloš Matejić, Milorad Bojić, Nenad Kostić, Nenad Petrović, Mirko Blagojević, OPTIMIZATION OF SOLAR COLLECTOR GEOMETRIC VALUES, 46. International HVAC&R Congress and Exhibition, Belgrade, 2015, 2.-4. Децебмар, pp. 278-283
  17. Miloš Matejić, Milorad Bojić, Nenad Petrović, Nenad Marjanović, Mirko Blagojević, COMPARATIVE ANALYSIS OF ALTERNATIVE SOLAR COLLECTORS FOR LOW‐RISE HOUSING UNITS, 9th International Quality Conference, Kragujevac, 2015, 05.06, pp. 225-230, ISBN 978‐86‐6335‐015‐1
  18. Nenad Kostić, Nenad Petrović, Milorad Bojić, Nenad Marjanović, Dragan Cvetković, INFLUENCE OF OPTIMAL HEATING SYSTEM CHOICE ON ENERGY SAVING AND DECREASE OF NEGATIVE ENVIRONMENT IMPACT, 9th International Quality Conference, Kragujevac, 2015, 05.06., pp. 231-238, ISBN 978‐86‐ 6335‐015‐1
  19. Nenad Petrović, Miloš Matejić, Nenad Kostić, Mirko Blagojević, Nenad Marjanović, PARAMETRIC MODELING OF A CYCLOID DRIVE RELATIVE TO INPUT SHAFT ANGLE, The 3rd International Conference Mechanical Engineering in XXI Century, Niš, 2015, 17.09., pp. 157-160, ISBN 978-86-6055-072-1
  20. Marko Denić, Nenad Petrović, Vesna Marjanović, ANALYSIS OF WIND TURBINE LATTICE TOWER TYPE CONCEPTS, THE 3rd INTERNATIONAL SCIENTIFIC CONFERENCE, East Sarajevo, Jahorina, Republic of Srpska, Bosnia and Herzegovina, 2016, 7. 12, pp. 109-114, ISBN 978-99976-623-7-8
  21. Marko Denić, Zorica Đorđević, Vesna Marjanović, Nenad Petrović, Nenad Kostić, COMPARATIVE COMPOSITE AND CONVENTIONAL DRIVE SHAFT ANALYSIS, International Congress Motor Vehicles & Motors 2016, Kragujevac, 2016, 06.10., pp. 167-172, ISBN 978-86-6335-037-3
  22. Nenad Kostić, Miloš Matejić, Nenad Petrović, Mirko Blagojević, Nenad Marjanović, OPTIMIZATION OF SOLAR COLLECTOR GEOMETRIC PARAMETERS USING A HEURISTIC OPTIMIZATION METHODS, 47th INTERNATIONAL CONGRESS & EXHIBITION ON HEATING, REFRIGERATION AND AIR CONDITIONING, Belgrade, 2016, 30. 11., pp. 271-278, ISBN 978-86-81505-75-5
  23. Nenad Kostić, Nenad Marjanović, Nenad Petrović, A NOVEL APPROACH FOR SOLVING GEAR TRAIN OPTIMIZATION PROBLEM, International Congress Motor Vehicles & Motors 2016, Kragujevac, 2016, 06.-08.10., pp. 133-138, ISBN 978-86-6335-037-3
  24. Nenad Marjanović, Nenad Kostić, Nenad Petrović, Mirko Blagojević, Miloš Matejić, TEACHING-LEARNING-BASED OPTIMIZATION ALGORITHM FOR SOLVING MACHINE DESIGN CONSTRAINED OPTIMIZATION, THE 3rd INTERNATIONAL SCIENTIFIC CONFERENCE, East Sarajevo, Jahorina, Republic of Srpska, Bosnia and Herzegovina, 2016, 7. 12, pp. 101-108, ISBN 978-99976-623-7-8
  25. Stojanović B., Veličković S., Vencl A., Babić M., Petrović N., Miladinović S., CHerkezova-Zheleva Z., Optimization and prediction of aluminium composite wear using Taguchi design and artificial neural network, 12th International Conference on Tribology – BULTRIB ‘16, Bulgaria, 2016, 27.-29. 10., pp. 38-45, ISBN 1313-9878
  26. Miloš Matejić, Nenad Petrović, Nenad Kostić, Mirko Blagojević, Nenad Marjanović, FRICTION INFLUENCE REDUCING BY USING LINER BEARINGS AND BALL SCREW SHAFTS IN MINI-PLATFORMS, 15th International Conference on Tribology, Kragujevac, 2017, 17.-19. 05. 2017., pp. 303-306, ISBN 978-86-6335-041-0
  27. N.Petrović, N.Marjanović, N.Kostić, M.Blagojević, M.Matejić, SIZING OPTIMIZATION OF PARAMETRICALLY DESIGNED TRUSSES, 13th International Conference on Accomplishments in Mechanical and Industrial Engineering, University of Banja Luka, Faculty of Mechanical Engineering, Banja Luka BiH, 2017, 26.-27. 05., pp. 93-100, ISBN 978-99938-39-72-9
  28. Nenad Marjanović, Nenad Kostić, Nenad Petrović, Mirko Blagojević, Miloš Matejić, Volume optimization of gear trains with spur gears using genetic algorithm, 8th International Conference on Manufacturing Science and Education – MSE 2017 “Trends in New Industrial Revolution”, Sibiu, Romania, 2017, 07.-09. 06., pp. 1-9
  29. Nenad Marjanović, Nenad Kostić, Nenad Petrović, Mirko Blagojević, Miloš Matejić, A NEW MODIFICATION OF GENETIC ALGORITHM OR SOLVING ENGINEERING OPTIMIZATION PROBLEMS, 8th International Scientific Conference IRMES 2017, Требиње, БиХ, 2017, 7.-9. Септембар, pp. 153-156, ISBN 978-9940-527-53-2
  30. Nenad Kostić, Nenad Petrović, Vesna Marjanović, Nenad Marjanović, AUTOMATED SELECTION OF ANALYTICALLY CALCULATED GEARBOX CONCEPTS ACCORDING TO DIMENSIONAL CRITERIA, 7th International Congress Motor Vehicles & Motors 2018, Kragujevac, 2018, 4.-5.10., pp. 265-270, ISBN 978-86-6335-055-7
  31. Nenad Petrović, Nenad Kostić, Nenad Marjanović, A COMPARISON OF TRUSS STRUCTURAL OPTIMIZATION TYPES WITH AND WITHOUT BUCKLING DYNAMIC CONSTRAINTS, COMETa 2018 - 4th International Scientific Conference, Jahorina, Republic of Srpska, B&H, 2018, 27.-30. 10., pp. 464-471, ISBN 978-99976-719-4-3
  32. Nenad Petrović, Nenad Kostić, Nenad Marjanović, Mirko Blagojević, Miloš Matejić, INFLUENCE OF BUCKLING ON TRUSS STRUCTURAL OPTIMIZATION, 14th International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI 2019, Banja Luka, 2019, 25.-25. 05, pp. 415-422, ISBN 978-99938-39-85-9
Списак резултата М34
Саопштење са међународног скупа штампано у изводу
Број
8
Укупан
  1. N. Petrović, N. Marjanović, N. Kostić, M. Blagojević, M. Matejić, SIZING OPTIMIZATION OF PARAMETRICALLY DESIGNED TRUSSES, 13TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING, Banja Luka, B&H, 2017, 26-27. Maj, pp. 18, ISBN 978-99938-39-73-6
  2. Nenad Marjanović, Nenad Kostić, Nenad Petrović, Mirko Blagojević, Miloš Matejić, VOLUME OPTIMIZATION OF GEAR TRAINS WITH SPUR GEARS USING GENETIC ALGORITHM, 8th International Conference on Manufacturing Science and Education-MSE 2017 "Trends in New Industrial Revolution", Sibiu, Romania, 2017, 07.-09.06., pp. 42
  3. Nenad Petrović, Nenad Marjanović, Nenad Kostić, Mirko Blagojević, Miloš Matejić, EFFECTS OF INTRODUCING DYNAMIC CONSTRAINTS FOR BUCKLING TO TRUSS SIZING OPTIMIZATION PROBLEMS, 2017 International Conference of Experimental and Numerical Investigations and New Technologies – CNN TECH 2017, Zlatibor, Serbia, 2017, 02-05.07, pp. 4, ISBN 978-86-7083-938-0
  4. Nenad Petrović, Nenad Kostić, Nenad Marjanović, DISCRETE VARIABLE TRUSS STRUCTURAL OPTIMIZATION USING BUCKLING DYNAMIC CONSTRAINTS, The 10th International Conference on Machine and Industrial Design in Mechanical Engineering - KOD 2018, Novi Sad, 2018, 06.-08.06, pp. 46-47, ISBN 978-86-6022-059-4
  5. Milos Matejic, Mirko Blagojevic, Ileana Ioana Cofaru, Nenad Kostic, Nenad Petrovic, and Nenad Marjanovic, DETERMINING EFFICIENCY OF CYCLOID REDUCERS USING DIFFERENT CALCULATION METHODS, 9th International Conference on Manufacturing Science and Education – MSE 2019, Sibiu, Romania, 2019, 05.-07. 06.
  6. Nenad Petrović, Nenad Kostić, Nenad Marjanović, Jelena Živković, Ileana Ioana Cofaru, EFFECTS OF STRUCTURAL OPTIMIZATION ON PRACTICAL ROOF TRUSS CONSTRUCTION, 9th International Scientific Conference [on] Research and Development of Mechanical Elements and Systems, IRMES 2019, Kragujevac, 2019, 05.-07. 09., pp. 30-31, ISBN 978‐86‐6335‐061‐8
  7. Nenad Petrović, Nenad Kostić, Nenad Marjanović, Mirko Blagojević, Miloš Matejić, INFLUENCE OF BUCKLING ON TRUSS STRUCTURAL OPTIMIZATION, 14th International Conference on Accomplishments in Mechanical and Industrial Engineering - DEMI 2019, Banja Luka, 2019, 24.-25.05, pp. 73, ISBN 978-99938-39-84-2
  8. Vesna Marjanović, Nenad Kostić, Nenad Petrović, Nicolae Florin Cofaru, MODELING LATERAL CRACK BREATHING IN A ROTOR USING FINITE ELEMENT METHOD, 9th International Scientific Conference [on] Research and Development of Mechanical Elements and Systems, IRMES 2019, Kragujevac, 2019, 05.-07.09., pp. 64-65, ISBN 978‐86‐6335‐061‐8
Списак резултата М51
Рад у водећем часопису националног значаја
Број
5
Укупан
  1. Miloš Matejić, Lozica Ivanović. Nenad Petrović, ADOPTION OF OPTIMAL TEETH PARAMETERS OF GEROTOR PUMP, ACTA TEHNICA CORVINIENSIS – Bulletin of Engineering, Vol.8, No.3, pp. 39-42, ISSN 2067-3809, 2015
  2. Nenad Kostić, Milorad Bojić, Miloš Matejić, Nenad Petrović, Vesna Marjanović, POGODNOSTI OPTIMIZACIJE NISKIH STAMBENIH OBJEKATA, kgh (Klimatizacija grejanje i hlađenje), Vol.44, No.1, pp. 55-66, ISSN 0350-1426, 2015
  3. N. Marjanović, N. Kostić, N. Petrović, M. Matejić, M. Blagojević, GENETIC ALGORITHM PARAMETER CONTROL FOR ACHIEVING BETTER OPTIMIZATION PERFORMANCE, ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, Vol.14, No.1, pp. 239-242, ISSN 1584-2665, 2016
  4. Nenad KOSTIĆ, Miloš MATEJIĆ, Nenad PETROVIĆ, Mirko BLAGOJEVIĆ, Nenad MARJANOVIĆ, Optimizacija geometrijskih veličina toplotnih prijemnika sunčeve energije heurističkim optimizacionim metodama, kgh (Klimatizacija grejanje i hlađenje), Vol.46, No.2, pp. 145-148, ISSN 0350-1426, Doi https://doi.org/10.24094/kghc.017.46.2.145, 2017
  5. Nenad Marjanović, Nenad Kostić, Nenad Petrović, Mirko Blagojević, Miloš Matejić, TEACHING-LEARNING-BASED OPTIMIZATION ALGORITHM FOR SOLVING MACHINE DESIGN CONSTRAINED OPTIMIZATION, ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, Vol.15, No.2, pp. 105-108, ISSN 1584-2665, 2017
Списак резултата М52
Рад у часопису националног значаја
Број
5
Укупан
  1. Nenad Marjanović, Nenad Kostić, Nenad Petrović, Mirko Blagojević, Miloš Matejić, Biserka Isailović, COMPARATIVE ANALYSIS OF ANALYTICAL AND OPTIMIZATION ON GEARBOX DIMENSIONS AND VOLUME, Machine design, Vol.6, No.4, pp. 127-130, ISSN 1821-1259, 2014
  2. Mirko Blagojević, Zorica Đorđević, Miloš Matejić, Nenad Kostić, Nenad Petrović, DYNAMIC MODEL OF CYCLOIDAL SPEED REDUCER, Journal Mobility and Vehicle Mechanics, Vol.41, No.3, pp. 63-71, ISSN 1450-5304, 2015
  3. Marko Denić, Zorica Đorđević, Vesna Marjanović, Nenad Petrović, Nenad Kostić, COMPARATIVE COMPOSITE AND CONVENTIONAL DRIVE SHAFT ANALYSIS, Journal Mobility and Vehicle Mechanics, Vol.42, No.4, pp. 43-50, ISSN 1450-6304, 2016
  4. Ненад Костић, Ненад Марјановић, Ненад Петровић, A NOVEL APPROACH FOR SOLVING GEAR TRAIN OPTIMIZATION PROBLEM, Journal Mobility and Vehicle Mechanics, Vol.42, No.2, pp. 69-76, ISSN 1450-5304, 2016
  5. Nenad Petrović, Nenad Kostić, Nenad Marjanović, DISCRETE VARIABLE TRUSS STRUCTURAL OPTIMIZATION USING BUCKLING DYNAMIC CONSTRAINTS, Machine Design, Vol.10, No.2, pp. 51-56, ISSN 1821-1259, 2018
Списак резултата М54
Уређивање водећег научног часописа националног значаја (на годишњем нивоу)
Број
3
Укупан
  1. Nenad Petrović, Nenad Kostić, Nenad Marjanović, COMPARISON OF APPROACHES TO 10 BAR TRUSS STRUCTURAL OPTIMIZATION WITH INCLUDED BUCKLING CONSTRAINTS, Applied Engineering Letters, Vol.2, No.3, pp. 98-103, ISSN 2466-4677, 2017
  2. Nenad Petrović, Nenad Kostić, Nenad Marjanović, Vesna Marjanović, INFLUENCE OF USING DISCRETE CROSS-SECTION VARIABLES FOR ALL TYPES OF TRUSS STRUCTURAL OPTIMIZATION WITH DYNAMIC CONSTRAINTS FOR BUCKLING, Applied Engineering Letters, Vol.3, No.2, pp. 78-83, ISSN 2466-4677, 2018
  3. Miloš MATEJIĆ, Mirko BLAGOJEVIĆ, Nenad KOSTIĆ, Nenad PETROVIĆ, Nenad MARJANOVIĆ, ANALYSIS OF EFFICIENCY OF A NEW TWO STAGE CYCLOID DRIVE CONCEPT, Proceedings on Engineering Science, Vol.1, No.1, pp. 335-340, ISSN 2620-283, 2019

УЧЕШЋЕ НА ПРОЈЕКТИМА РЕСОРНОГ МИНИСТАРСТВА
  1. РАЗВОЈ СОФТВЕРА ЗА РЕШАВАЊЕ СПРЕГНУТИХ МУЛТИФИЗИЧКИХ ПРОБЛЕМА, ТР32036, стипендиста, 2013- , руководилац пројекта Проф.др: Мирослав Живковић

УЧЕШЋЕ НА МЕЂУНАРОДНИМ ПРОЈЕКТИМА
  1. TEMPUS, Improvement of product development studies in Serbia and Bosnia and Herzegovina (IPROD), JPCR 530577, 2012 -
  2. Technical Characteristics Researching of Modern Products in Machine Industry (Machine Design, Fluid Technics and Calculations) with the Purpose of Improvement Their Market Characteristics and Better Placement on the Market, CEEPUS, CIII-RS-0304-07-1415, 2016 -
  3. ERASMUS+ 2018. -

УЧЕШЋЕ У РАЗВОЈУ ДЕЛАТНОСТИ ВИСОКОГ ОБРАЗОВАЊА, НАУЧНОИСТРАЖИВАЧКОГ, ОДНОСНО, УМЕТНИЧКОГ СТВАРАЛАШТВА И РАДУ ПОСЛОВОДНИХ И СТРУЧНИХ ОРГАНА И ОРГАНИЗАЦИЈА
  1. Организација и реализација курса PLM софтвера за гимназијалце (Computer Aided Gimnazijalac, Курс 3D моделирања за гимназијалце), , На матичном факултету, 2010. -
  2. Секретар Катедре за Машинске конструкције и механизацију, На матичном факултету, 2016. -

РЕЗУЛТАТИ ПЕДАГОШКОГ РАДА
  1. Отпорност материјала, На матичном факултету, 2012. - 2013.
  2. Инжењерски алати, На матичном факултету, 2013. -
  3. Индустријски дизајн, На матичном факултету, 2013. -
  4. Конструисање помоћу рачунара, На матичном факултету, 2015. -
  5. Примена рачунара у развоју производа, На матичном факултету, 2015. -
  6. Техничко цртање са компјутерском графиком, На матичном факултету, 2016. -
  7. Основи конструисања, На матичном факултету, 2013. -