FACULTY OF ENGINEERING KRAGUJEVAC
UNIVERSITY KRAGUJEVAC
CURRICULUM VITAE
Saša Milojević

GENERAL INFORMATION
First and last nameSaša Milojević
Year and place of birthKraljevo, 1973
PositionAssistant professor
E-mailsasa.milojevic@kg.ac.rs
Education-scientific / education–art fieldTechnical and Technological Sciences
University, faculty, organizational unitUniversity of Kragujevac Faculty of Engineering, Department for Motor Vehicles and Engines
Field and closer specialtyMechanical Engineering, Motor Vehicles and Engines

EDUCATION – DIPLOMAS
BACHELOR STUDIES
Year1999
PlaceKragujevac
InstitutionUniversity of Kragujevac, Faculty of Mechanical Engineering
HeadlineApplication of alcohol fuel in automotive Otto engines
FieldMotor Vehicles and IC Engines
MSC THESIS
Year2005
PlaceKragujevac
InstitutionUniversity of Kragujevac, Faculty of Mechanical Engineering
HeadlineAnalyzing the Impact of Variable Compression Ratio on Combustion Process in Diesel Engines; (Investigation of the influence of compression ratio on working process of the Diesel engine)
FieldMotor Vehicles and IC Engines
PHD THESIS
Year2024
PlaceKragujevac
InstitutionUniversity of Kragujevac Faculty of Engineering
HeadlineIdentification of tribological characteristics regarding the optimized construction of reciprocating compressor cylinder for exploitation on motor vehicles
FieldMechanical Engineering; Motor Vehicles and Engines

TECHNICAL BIOGRAPHY – POSITIONS
YearInstitutionPosition
1999Faculty of Mechanical Engineering in KragujevacResearch prentice
2012University of Kragujevac, Faculty of EngineeringResearch assistant
2015University of Kragujevac, Faculty of EngineeringResearch assistant
2002Faculty of Mechanical Engineering in KragujevacResearch assistant
2024University of Kragujevac Faculty of EngineeringAssistant professor

PROFESSIONAL BIOGRAPHY - IMPROVEMENTS
YearInstitutionDuration
2000University in Kragujevac, Faculty of Mechanical Engineering. Traininig.One year
2005Vocational education - doctoral studies program. IFP School, Centre for IC Engines and Fuels, Paris November/December
2005An intensive course of French language diploma EU-1150768. Alliance Francaise, Paris. November/December
2008Training for the design and operation of trucks, marketing and managerial activities. RUP MAZ Minsk.April/May
2008Preparation and application project HyCMbus, call FP7-230744, MV Engineering GmbH, Krefeld.August
2008Training for engine diagnostics Mercedes-Benz (MTU Friedrichshafen GmbH) and Deutz. RUP MAZ, Minsk.September
2008Design and installation of equipment for gas fuel in motor vehicles. SLAVGAS Expo, Moscow.October
2009Education in the field of business communications and media relations - Certificate. Biznislink, European Mentoring and Coaching Council, Kragujevac.January/February
2009Training on how to create a market for its innovation, business plans. Chamber of Commerce of the Republic of Serbia, the Committee for technological innovation, Belgrade.From March 2009. until November 2010.
2009Training for the design and operation of the bus. Technical preparation for the installation of the first bus powered by natural gas in the Republic of Serbia. Rup MAZ, Minsk.April
2009Technical preparation regarding cooperation in the design, manufacture and sale of military vehicles. MZKT, Minsk.April
2009Mobility and City Transport Training. UITP, Wien June
2009Training for the production of trucks and buses. Factory Oao MAZ, Minsk.December
2009Strategic production of military vehicles. Technical training and marketing. Factory MZKT Minsk.December
2010Preparing for proposals E-MINICHASSIS, FP7-261884. Maritime Institute, Zagreb.February
2010Presentation of the project of introducing environmentally friendly vehicles in the public transport of passengers and transport models from door to door. Autotrolej Ltd. Rijeka.April
2010Presentation and discussion on the project proposal for the introduction of environmentally friendly vehicles in urban traffic. Chamber of Commerce of the Republic of Slovenia, Ljubljana.May
2010Design and install the workplace bus driver type Continental VDO. DrabPol, Mykanow.August
2010Sustainable urban transport and mobility in cities - Certificate. CIFAL Plock and United Nations Institute for Training and Research UNITAR, Plock September
2010Design of installation and operation of the A / C system Thermobus in buses. Thermobus Spa, BergamoNovember
2011Design Cummins ISL. Installation and exploitation in trucks and buses. Theoretical and practical training. Cummins SerboMonte, Belgrade.January
2011Design, installation and exploitation of automatic gearboxes Allison. Allison SAT PJ, Belgrade.February
2011Training for technical plant operator for streaming compressed natural gas. Factory reciprocating compressors Aspro GNC, Buenos Aires.February
2011Working with gas reservoirs. Design, installation in the vehicle inspection and maintenance standards - Certificate. Dynetek Europe GmbH, Ratingen.March
2011Swagelok Installation and Safety Seminar - Certificate. Vaust Ventile & Fittings GmbH, Wien April
2011Training for the installation and maintenance of LPG gas equipment in motor vehicles - Certificate. Lovato Spa, Torino.April/May
2011Training for members of the commission for testing vehicles - Certificate. University of Kragujevac, Faculty of Mechanical Engineering, Center for technical inspection of vehicles.May/June
2013Training for inspection bodies move to the new edition of ISO / IEC 17020: 2012 - Certificate. University of Novi Sad, Faculty of Technology.October
2014Internal audits according to ISO / IEC 17020: 2012 - Diplome of the Internal Auditor. Institute for research and design in the economy IIPP, Belgrade.January
2018CEEPUS CIII-BG-1103-02-1718 - Modelling, Simulation and Computer-aided Design in Engineering and Management / J.J.Strossmayer University in Osijek, Mechanical Engineering Faculty in Slavonski Brod02-30 April

AWARDS AND RECOGNITIONS
YearName of award/recognition
2000Award for the best thesis. Application of alcohol fuel in car engines. Association of Oil and Gas YUNG-4P, Vrnjačka Banja
2009Team leader Ekobus. The award for the best team in the region realized in the category of Innovation, Ministry of Science and Technological Development of Republic of Serbia, the competition for the best technological innovation NTI 2009, Belgrade.

RESULTS OF SCIENTIFIC AND RESEARCH WORK
Papers published in international scientific journals
  1. Branimir LJ. MILOSAVLJEVIĆ, Radivoje B. PEŠIĆ, Dragan S. TARANOVIĆ, Aleksandar LJ. DAVINIĆ and Saša T. MILOJEVIĆ, MEASUREMENTS AND MODELING POLLUTION FROM TRAFFIC IN A STREET CANYON: Assessing and Ranking the Influences, THERMAL SCIENCE, Vol.19, No.6, pp. 2093-2104, ISSN 0354-9836, Doi 10.2298/TSCI150402111M, 2015
    TSCI150402111M.pdf
  2. Saša Milojević, Blaža Stojanović, Determination of tribological properties of aluminum cylinder by application of Taguchi method and ANN-based model, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.40, No.12, pp. 1-11, ISSN 1678-5878, Doi https://doi.org/10.1007/s40430-018-1495-8, 2018
  3. Tomáš Skrúcaný, Martin Kendra, Ondrej Stopka, Saša Milojević, Tomasz Figlus and Csaba Csiszár, Impact of the Electric Mobility Implementation on the Greenhouse Gases Production in Central European Countries, Sustainability, Vol.11, No.18, pp. 1-15, ISSN 2071-1050, Doi 10.3390/su11184948, 2019
  4. Saša Milojević, Jasna Glišović, Slobodan Savić, Goran Bošković, Milan Bukvić, Blaža Stojanović, Particulate Matter Emission and Air Pollution Reduction by Applying Variable Systems in Tribologically Optimized Diesel Engines for Vehicles in Road Traffic, Atmosphere, Vol.15, No.2, pp. 184, ISSN 2073-4433, Doi 10.3390/atmos15020184, 2024
  5. Radivoje B. PEŠIĆ, Saša T. MILOJEVIĆ, and Stevan P. VEINOVIĆ, BENEFITS AND CHALLENGES OF VARIABLE COMPRESSION RATIO AT DIESEL ENGINES, THERMAL SCIENCE, Vol.14, No.4, pp. 1063-1073, ISSN 0354-9836, Doi 10.2298/TSCI10041063P, 2010
    TSCI10041063P.pdf
  6. S. MILOJEVIC and R. PESIC, THEORETICAL AND EXPERIMENTAL ANALYSIS OF A CNG CYLINDER RACK CONNECTION TO A BUS ROOF, International Journal of Automotive Technology, Vol.13, No.3, pp. 497-503, ISSN 1976-3832, Doi 10.1007/s12239−012−0047−y, 2012
    fulltext.pdf
  7. R. PESIC and S. MILOJEVIC, EFFICIENCY AND ECOLOGICAL CHARACTERISTICS OF A VCR DIESEL ENGINE, International Journal of Automotive Technology, Vol.14, No.5, pp. 675-681, ISSN 1976-3832, Doi 10.1007/s12239−013−0073−4, 2013
    01-220120150(p.675-681).pdf
  8. S. MILOJEVIC, R. PESIC, D. TARANOVIC, TRIBOLOGICAL OPTIMISATION OF RECIPROCATING MACHINES ACCORDING TO IMPROVING PERFORMANCE., Journal of the Balkan Tribological Association, Vol.21, No.3, pp. 690-699, ISSN 1310-4772, Doi -, 2015
    690-699.pdf
  9. Dragan Taranović, Dobrivoje Ninković, Aleksandar Davinić, Radivoje Pešić, Jasna Glišović, Saša Milojević, VALVE DYNAMICS IN RECIPROCATING COMPRESSORS FOR MOTOR VEHICLES, Tehnički vjesnik (Technical gazette), Vol.24, No.Supplement 2, pp. 313-319, ISSN 1330-3651, Doi 10.17559/TV-20151117130112, 2017
  10. S. Narayan, Sasa Milojevic, Vipul Gupta, Combustion monitoring in engines using accelerometer signals, Journal of Vibroengineering (JVE), Vol.21, No.6, pp. 1-12, ISSN 1392-8716, Doi 10.21595/jve.2019.20516, 2019
  11. Milojević Saša, Dragan Džunić, Dejan Marić, Tomáš Skrúcaný, Slobodan Mitrović i Radivoje Pešić, Tribological Assessment of Aluminum Cylinder Material for Piston Compressors in Trucks and Buses Brake Systems, TEHNIČKI VJESNIK - TECHNICAL GAZETTE, Vol.28, No.4, pp. 1268-1276, ISSN 1330-3651, Doi 10.17559/TV-20200915110030, 2021
  12. Milojević, S., Savić, S., Marić, D., Stopka, O., Krstić, B. i Stojanović, B., Correlation between Emission and Combustion Characteristics with the Compression Ratio and Fuel Injection Timing in Tribologically Optimized Diesel Engine, Tehnički vjesnik, Vol.29, No.4, pp. 1210-1219, ISSN 1330-3651, Doi 10.17559/TV-20211220232130, 2022
  13. Skulić, A., Milojević, S., Marić, D., Ivanović, L., Krstić, B., Radojković, M. i Stojanović, B., The Impact of Lubricant Viscosity and Materials on Power Losses and Efficiency of Worm Gearbox, Tehnički vjesnik, Vol.29, No.6, pp. 1853-1860, ISSN 1330-3651, Doi 10.17559/TV-20220207092015, 2022
  14. Milojević, S., Savić, S., Mitrović, S., Marić, D., Krstić, B., Stojanović, B. i Popović, V., Solving the Problem of Friction and Wear in Auxiliary Devices of Internal Combustion Engines on the Example of Reciprocating Air Compressor for Vehicles, Tehnički vjesnik, Vol.30, No.1, pp. 122-130, ISSN 1330-3651, Doi 10.17559/TV-20220414105757, 2023
  15. Mladen Radojković, Blaža Stojanović, Saša Milojević, Dejan Marić, Slobodan Savić, Aleksandar Skulić, Božidar Krstić, Square Openings as Sources of Stress Concentration in Parts of Machines and Devices, Tehnički vjesnik, Vol.30, No.2, pp. 474-480, ISSN 1330-3651, Doi 10.17559/TV-20220603080026, 2023
  16. S. MILOJEVIĆ, R. PEŠIĆ, D. TARANOVIĆ, Tribological Principles of Constructing the Reciprocating Machines, Tribology in Industry, Vol.37, No.1, pp. 13-19, ISSN 0354-8996, 2015
    2.pdf
Papers presented at international conferences
  1. Pavlović R., Milojević S, EKOLOŠKE KARAKTERISTIKE KLASIČNIH I SAVREMENIH DIZEL MOTORA (ECOLOGICAL CHARACTERISTIC OF CLASSIC AND MODERNE DIESEL ENGINES), XII International Scientific Meeting Motor Vehicles & Engines, Kragujevac, 2002, 07.-09. 10, pp. 233-236, ISBN 86-80581-43-7
  2. Radivoje PEŠIĆ, Saša MILOJEVIĆ, Stevan VEINOVIĆ, PERIODI ZAMENE MOTORNIH ULJA – POREĐENJE MINERALNIH POLUSINTETSKIH I POTPUNO SINTETSKIH (DRAIN INTERVALS FOR ENGINE OIL-MINERAL, SEMI AND FULL SYNTHETIC LUBRICANTS), 8th International Tribology Conference, Belgrade, 2003, 8. -10. October, pp. 187-191, ISBN 86-80581-57-7
  3. S. Milojević, R. Pavlović, ISTRAŽIVANJE PRIMENE AUTOMATSKI PROMENLJIVOG STEPENA KOMPRESIJE KOD DIZEL MOTORA (RESEARCH OF A USING DIESEL ENGINE WITH AUTOMATIC VARIABLE COMPRESSION RATIO), MVM 04, XIII International Scientific Meeting Motor Vehicles & Engines, Kragujevac, Kragujevac, 2004, 04.-06.10., pp. 540-550, ISBN 86-80581-43-7
  4. Pešić Radivoje, Milojević Saša, Davinić Aleksandar, Veinović Stevan, Virgiliu Dan Negrea, Pop Gheorghe, THE EXPERIMENTAL VCR DIESEL ENGINE AND DETERMINATION OF DOUBLE VIBE FUNCTION PARAMETERS, The IX-th International Congress Automotive and Environment, CAR 2005, Pitesti, 2005, 2-4.11., pp. 1-10, ISBN 973-690-450-4
  5. Saša Milojević, Radivoje Pešić, Aleksandar Davinić, Radomir Pavlović, Stevan Veinović, INFLUENCE OF THE COMPRESSION RATIO ON COMBUSTION AND EMISSIONS PARAMETERS OF THE DIESEL ENGINE, International Congress Motor Vehicles & Motors 2006, Kragujevac, 2006, 4th-6th October, pp. 1-12, ISBN 86-80581-94-1
  6. Saša MILOJEVIĆ, Radivoje PEŠIĆ, Zoran VUJOVIĆ, Nenad ILIĆ, Ivana MILOJEVIĆ, CNG BUSES FOR CLEAN AND ECONOMICAL CITY TRANSPORT, International Congress Motor Vehicles & Motors 2010, Kragujevac, 2010, 7th-9th October, pp. 319-328, ISBN 978-86-86663-57-3
  7. Milojević Saša, Pešić Radivoje, LOGISTICS OF APPLICATION NATURAL GAS ON BUSES, CAR 2011, The 10th International Automotive Congress “Automotive engineering and environment, University of Pitesti, Romania, 2011, 2.-4. November, pp. 1-10, ISBN 1453-1100
  8. Dobrivoje Ninković, Dragan Taranović, Saša Milojević, Radivoje Pešić, MODELLING VALVE DYNAMICS AND FLOW IN RECIPROCATING COMPRESSORS – A SURVEY, International Congress Motor Vehicles & Motors 2012, Kragujevac, 2012, 3rd-5th October, pp. 113-125, ISBN 978-86-86663-91-7
  9. Dobrivoje Ninković, Dragan Taranović, Saša Milojević, Radivoje Pešić, A REVIEW OF MODELS FOR PREDICTING INSTANTANEOUS HEAT EXCHANGE BETWEEN THE GAS AND CYLINDER IN RECIPROCATING COMPRESSORS, International Congress Motor Vehicles & Motors 2012, Kragujevac, 2012, 3-5 October, pp. 126-136, ISBN 978-86-86663-91-7
  10. Saša Milojević, Dušan Gordić, Radivoje Pešić, NATURAL GAS AS A SAFE TECHNOLOGY FOR CLEAN URBAN VEHICLES, International Congress Motor Vehicles & Motors 2012, Kragujevac, 2012, 3-5 October, pp. 269-279, ISBN 978-86-86663-91-7
  11. MILOJEVIC SASA, PESIC RADIVOJE, BENEFIT AND RESTRICTIONS RELATED TO THE APPLICATION OF NATURAL GAS AS ENGINE FUEL FOR CITY BUSES, 13th International Conference on Clean Energy 2014 (ICCE-2014), Istanbul, Turkey, 2014, June 8-12, pp. 1-8, ISBN 978-605-64806-0-7
  12. Sasa Milojevic, Optimization of the Hydrogen System for City Busses with Respect to the Traffic Safety, 20th World Hydrogen Energy Conference (WHEC 2014), KDJ Convention Center, Gwangju Metropolitan City, S. Korea, 2014, June 15-20, pp. 853-861, ISBN 978-1-63439-655-4
  13. Saša MILOJEVIĆ, Nenad ILIĆ, APPLICATION OF HYDROGEN AS AN ALTERNATIVE FUEL FOR PROPULSION SYSTEMS IN CITY BUSES OVERVIEW, International Congress Motor Vehicles & Motors 2014, Kragujevac, 2014, 9th-10th October, pp. 268-275, ISBN 978-86-6335-010-6
  14. Saša MILOJEVIĆ, Radivoje PEŠIĆ, Dragan TARANOVIĆ, Aleksandar DAVINIĆ, TRIBOLOGICAL OPTIMIZATION OF RECIPROCATING MACHINES ACCORDING TO IMPROVING PERFORMANCE, International Congress Motor Vehicles & Motors 2014, Kragujevac, 2014, 9th-10th October, pp. 372-382, ISBN 978-86-6335-010-6
  15. Aleksandar Davinić, Radivoje Pešić, Dragan Taranović, Saša Milojević., THE USE OF MODERN FUELS IN DIESEL ENGINES OF THE OLDER GENERATION., DEMI 2015, 12th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology., Banja Luka, 2015, 29– 30 May, pp. 703-712, ISBN 978-99938-39-53-8
  16. Saša Milojević, Radivoje Pešić, Application Natural Gas on City Buses and Their Introduction in the Traffic, SimTerm 2015, 17th Symposium on Thermal Science and Engineering of Serbia, Republic of Serbia, Sokobanja, 2015, 20–23, October, pp. 987-993, ISBN 978-86-6055-076-9
  17. Saša Milojević, Radivoje Pešić, APPLICATION OF BIOMETHANE IN PROPULSION AND MOBILE SYSTEMS, DEMI 2015, 12th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology, Banja Luka, 2015, 29th – 30th May, pp. 681-686, ISBN 978-99938-39-53-8
  18. Saša Milojević, Radivoje Pešić, Aleksandar Davinić, Dragan Taranović, COATED AL PISTON AS TECHNOLOGICAL SOLUTION TO LOWERING OF FRICTION LOSSES INSIDE IC ENGINE, DEMI 2015, 12th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology., Banja Luka, 2015, 29– 30 May, pp. 741-746, ISBN 978-99938-39-53-8.
  19. Milan BUKVIĆ, Živojin PETROVIĆ, Blaža STOJANOVIĆ, Saša MILOJEVIĆ, MODELS AND SIMULATIONS OF TRANSMISSION OF HYBRID AND ELECTRIC VEHICLES, International Congress Motor Vehicles & Motors 2016, Kragujevac, 2016, 9-10. oktobar, pp. 149-155, ISBN 978-86-6335-037-3
  20. Saša MILOJEVIĆ, Radivoje PEŠIĆ, Dragan TARANOVIĆ, FIRE SAFETY OF CNG BUSES – PROPER EXPERIENCES, International Congress Motor Vehicles & Motors 2016, Kragujevac, 2016, 9-10. oktobar, pp. 97-106, ISBN 978-86-6335-037-3
  21. GRUJIĆ Ivan, STOJANOVIĆ Nadica, GLIŠOVIĆ Jasna PhD, DAVINIĆ Aleksandar PhD, MILOJEVIĆ Saša, MODELING AND AERODYNAMIC SIMULATION OF THE PASSENGER VEHICLE, PROCEEDINGS OF THE 5th INTERNATIONAL SCIENTIFIC CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ISCAME 2017), Debrecen, Hungary, 2017, 12-13 October, pp. 172-177, ISBN 978-963-473-304-1
  22. Saša MILOJEVIĆ, Dragan DžUNIĆ, Dragan TARANOVIĆ, Radivoje PEŠIĆ, Slobodan MITROVIĆ, TRIBOLOGICAL REINFORCEMENTS FOR CYLINDER LINER OF ALUMINUM - EXAMPLE COMPRESSORS FOR BRAKE SYSTEMS OF TRUCKS AND BUSES, 15th International Conference on Tribology SERBIATRIB ’17, Kragujevac, 2017, 17 – 19 May, pp. 251-257, ISBN 978‐86‐6335‐041‐0
  23. Saša Milojević, Radivoje Pešić, Dragan Taranović, DETERMINATION OF LOSSES RELATED TO FRICTION WITHIN THE RECIPROCATING COMPRESSORS - INFLUENCES OF TRIBOLOGICAL OPTIMIZATION OF PISTON AND CYLINDER, 13th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2017, Banja Luka, Republic of Srpska, 2017, 26-27 May, pp. 723-728, ISBN 978-99938-39-72-9
  24. STOJANOVIĆ Nadica, GRUJIĆ Ivan, GLIŠOVIĆ Jasna PhD, MILOJEVIĆ Saša, DAVINIĆ Aleksandar PhD, VANES SHAPE OPTIMIZATION OF VENTILATED DISC BRAKES FOR HEAVY DUTY VEHICLES, PROCEEDINGS OF THE 5th INTERNATIONAL SCIENTIFIC CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ISCAME 2017), Debrecen, Hungary, 2017, 12-13 October, pp. 491-496, ISBN 978-963-473-304-1
  25. Radivoje Pešić, Saša Milojević, Dragan Taranović, Milan Stanojević, EXPERIENCES RELATED TO THE INSPECTION OF MOTOR VEHICLES RUNNING ON NATURAL GAS IN THE REPUBLIC OF SERBIA, VII International Congress, Motor Vehicles & Motors 2018, Ecology - Vehicle and Road Safety - Efficiency, Serbia, Kragujevac, 2018, 4-5 October, pp. 245-254, ISBN 978-86-6335-055-7
  26. Sandra Veličković, Blaža Stojanović, Lozica Ivanović, Slavica Miladinović, Saša Milojević, APPLICATION OF NANOCOMPOSITES IN THE AUTOMOTIVE INDUSTRY, VII International Congress, Motor Vehicles & Motors 2018, Ecology - Vehicle and Road Safety - Efficiency, Serbia, Kragujevac, 2018, 4-5 October, pp. 323-332, ISBN 978-86-6335-055-7
  27. Saša Milojević and Radivoje Pešić, Influence ferrous based reinforcements on tribological parameters of aluminum cylinder for piston compressor in brake system of bus., 2ND INTERNATIONAL CONFERENCE ON TRIBOLOGY (TURKEYTRIB’18), Istanbul, Turkey, 2018, 18. april, pp. 78-, ISBN 978-605-9546-10-2
  28. Saša Milojević, Dragan Džunić, Dragan Taranović, Radivoje Pešić, Slobodan Mitrović, EXPERIMENTAL DETERMINATION OF TRIBOLOGICAL CHARACTERISTICS OF COMPOSITE MATERIALS IN USE FOR PARTS IN ALUMINUM AIR COMPRESSOR (PISTON AND CYLINDER), VII International Congress, Motor Vehicles & Motors 2018, Ecology - Vehicle and Road Safety - Efficiency, Serbia, Kragujevac, 2018, 4-5 October, pp. 383-392, ISBN 978-86-6335-055-7
  29. Saša MILOJEVIĆ, Radivoje PEŠIĆ, Challenges in City Transport - Alternative Fuels and Door to Door Model, The 4th INTERNATIONAL CONFERENCE MECHANICAL ENGINEERING IN XXI CENTURY (MASING 2018), University of Niš, Faculty of Mechanical Engineering, Serbia, 2018, 19-20 April, pp. 387-392, ISBN 978-86-6055-103-2
  30. Saša Milojević, Radivoje Pešić, Aleksandar Davinić, Dragan Taranović, Snežana Petković, Emil Hnatko, Radmilo Stefanović, Stevan Veinović, INFLUENCE OF VARIABLE COMPRESSION RATIO ON EMISSION AND VIBE FUNCTION PARAMETERS OF EXPERIMENTAL ENGINE, VII International Congress, Motor Vehicles & Motors 2018, Ecology - Vehicle and Road Safety - Efficiency, Serbia, Kragujevac, 2018, 4-5 October, pp. 227-244, ISBN 978-86-6335-055-7
  31. S. Milojević, R. Pešić, J. Lukić, D. Taranović, T. Skrucany and B Stojanović, Vehicles optimization regarding to requirements of recycling Example: Bus dashboard, 9th International Scientific Conference - Research and Development of Mechanical Elements and Systems (IRMES 2019), University of Kragujevac, Faculty of Engineering, 2019, 5–7 September, pp. 1-7
  32. Saša Milojević, Dragan Džunić, Dragan Taranović, Radivoje Pešić, Slobodan Mitrović, OPTIMIZATION OF MECHANICAL LOSSES IN RECIPROCATING AIR COMPRESSOR WITH CYLINDER CONSISTING OF ALUMINUM ALLOY, Proceedings on Engineering Sciences, 16th International Conference on Tribology – SERBIATRIB ‘19, University of Kragujevac, Faculty of Engineering, Serbia, 2019, 15. May, pp. 357-364, ISBN 2620 - 2832
  33. Saša Milojević, Radivoje Pešić, Dragan Taranović, Aleksandar Davinić, POWER MEASUREMENT OF MECHANICAL LOSSES IN EXPERIMENTAL RECIPROCATING AIR COMPRESSOR IMPACT OF PISTON GROUP, 14TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING DEMI 2019, University of Banja Luka, Faculty of Mechanical Engineering, 2019, 24 May, pp. 485-490, ISBN 978-99938-39-85-9
  34. Dragan Vašalić, Zoran Masoničić, Saša Milojević, Ivan Ivković, Radivoje Pešić, SOME ASPECTS CONCERNING MANAGEMENT OF ROAD TRANSPORT OF DANGEROUS GOODS USING CONTEMPORARY INFORMATION SYSTEMS, 8th International Congress Motor Vehicles & Motors 2020, University of Kragujevac, Faculty of Engineering, 2020, 8.X, pp. 337-342, ISBN 978-86-6335-074-8
  35. Ivan Miletić, Marko Miletić, Saša Milojević, Robert Ulewicz, Ružica Nikolić, THE BUCKLING ANALYSIS OF A ELASTICALLY CLAMPED RECTANGULAR PLATE, 8th International Congress Motor Vehicles & Motors 2020, University of Kragujevac Faculty of Engineering, 2020, 8.X, pp. 183-190, ISBN 978-86-6335-074-8
  36. Milan Blagojević, Milan Bojović, Saša Milojević, Petar Marković, Dragan Lazarević, MODIFICATION OF RACING CAR CYLINDER HEAD USING 3D DIGITIZATION AND REVERSE ENGINEERING, 8th International Congress Motor Vehicles & Motors 2020, University of Kragujevac Faculty of Engineering, 2020, 8.X, pp. 191-196, ISBN 978-86-6335-074-8
  37. Nikola Nešić, Julijana Simonović, Milan Blagojević, Saša Milojević and Srđan Jović, Vehicle Suspension System with Integrated Inerter - Extended Analysis, IOP Conference Series: Materials Science and Engineering, IX International Congress Motor Vehicles and Motors (MVM 2022), Kragujevac, Serbia, 2022, 13/10-14/10, pp. 1271, ISBN 1757-899X
  38. Mladen Radojković, Saša Milojević, Snežana Joksić, Aleksandra Kokić Arsić, Blaža Stojanović, Distribution of Minimum main Normal Stress in Uniaxial Tension Plate with Circular Opening, XII International Conference on Social and Technological Development, Trebinje, 2023, 15-18.06., pp. 454-458, ISBN 978-99955-40-70-8
  39. Saša Milojević, Goran Bošković, Slobodan Savić, Blaža Stojanović, Conditions for Safe Application of Liquefied Natural Gas in Heavy-Duty Garbage Trucks, The 20th International Conference “Man and Working Environment” Safety Engineering & Management – Science, Industry, Education (SEM-SIE 2023), Niš, 2023, 7-8.12., pp. 201-205, ISBN 978-86-6093-115-5
  40. Saša Milojević, Nataša Kontrec, Stefan Panić, Vera Petrović, Slobodan Drašković, Hranislav Milošević, Maintainability Analysis of the Special Purpose Vehicle Engine, VIII Всероссийская Конференция с Международным Участием "Безопасность и Мониторинг Природных и Техногенных Систем", Красноярск, 2023, 6-20.10., pp. 91-94, ISBN 978-5-905569-25-8
  41. Snežana Joksić, Mladen Radojković, Živče Šarkočević, Saša Milojević, Blaža Stojanović, Stress Analysis of Gear Shift Fork with Mass Optimization, XII International Conference on Social and Technological Development, Trebinje, 2023, 15-18.06., pp. 459-464, ISBN 978-99955-40-70-8
  42. Snežana Joksić, Mladen Radojković, Živče Šarkočević, Saša Milojević, Blaža Stojanović, Deformation Analysis of Gear Shift Fork with Mass Optimization, 14th DQM International Conference- DQM-POLYTECH-2023, Life Cycle Engineering and Management, Prijevor, 2023, 22-23.06., pp. 165-171, ISBN 978-86-86355-52-2
  43. Suzana Petrović Savić, Vladimir Kočović, Dragan Džunić, Marko Pantić, Sonja Kostić, Saša Milojević, Tijana Prodanović, Surface Characterisation using Image Processing, 18th International Conference on Tribology-SERBIATRIB ’23, Kragujevac, 2023, 17-19.05, pp. 737-742, ISBN 978-86-6335-103-5
  44. Saša Milojević, Radivoje Pešić, Aleksandar Davinić, Tomaš Skrucany, Dragan Taranović, Effect of Changes in Compression Ratio upon Experimental Diesel Engine Performance, 19th International Conference on Thermal Science and Engineering of Serbia, SimTerm 2019, Sokobanja, Serbia, 2019, 22-25 October, pp. 169, ISBN 978-86-6055-123-0
  45. Saša Milojević, Radivoje Pešić, Jovanka Lukić, Dragan Taranović, Tomas Skrucany, Blaža Stojanović, VEHICLES OPTIMIZATION REGARDING TO REQUIREMENTS OF RECYCLING EXAMPLE: BUS DASHBOARD, Book of Abstracts for the 9th International Scientific Conference on Research and Development of Mechanical Elements and Systems, IRMES 2019, University of Kragujevac Faculty of Engineering, 2019, 5-7 September, pp. 212-213, ISBN 978‐86‐6335‐061‐8

PARTICIPATION IN INTERNATIONAL PROJECTS
  1. HyCMbus - HYBRID DRIVE SYSTEM FOR AN ADVANCED CITY LOW FLOOR MINIBUS. (2008). Call FP7-SME-2008-1, the reference number of the proposed project FP7-230744 (coordinator and leader of the action, within the preparation and submission of a project).
  2. E-MINICHASSIS – ELECTRICALLY DRIVEN LOW FLOOR MINIBUS CHASSIS. Позив FP7-SME-2010-1, број пројекта FP7-261884 (координатор пројекта – Consortium and cooperation manager WP8 и вођа потпројекта – Product leader WP4, WP5, WP6, WP7). Пројекат je прошао оцењивање – праг до одобрења финансијских средстава – Evaluation Summary Report 261884, REA decision No. C(2010)5987, 26/08/2010