FACULTY OF ENGINEERING KRAGUJEVAC
UNIVERSITY KRAGUJEVAC
CURRICULUM VITAE
Srbislav Aleksandrović

GENERAL INFORMATION
First and last nameSrbislav Aleksandrović
Year and place of birthKragujevac, 1958.
PositionFull professor
E-mailsrba@kg.ac.rs
Education-scientific / education–art fieldTechnical Technological Sciences
University, faculty, organizational unitUniversity of Kragujevac Faculty of Engineering
Field and closer specialtyMechanical Egineering, Production and Industrial Engineering, Manufacturing Technologies, Metal Forming and Formability

EDUCATION – DIPLOMAS
BACHELOR STUDIES
Year1982
PlaceKragujevac
InstitutionFaculty of Mechanical Engineering, University of Kragujevac
HeadlineCold extrusion forming process
FieldMetal forming technologies
MSC THESIS
Year1993
PlaceKragujevac
InstitutionFaculty of Mechanical Engineering, University of Kragujevac
HeadlineForming limit of thin sheets metals in conditions of nonmonotonous forming process
FieldMetal forming technologies
PHD THESIS
Year2000
PlaceKragujevac
InstitutionFaculty of Mechanical Engineering, University of Kragujevac
HeadlineDeep drawing of thin sheet metals in conditions of nonmonotonous forming and variable tribological parameters
FieldMetal forming technologies

TECHNICAL BIOGRAPHY – POSITIONS
YearInstitutionPosition
1986Faculty of Mechanical Engineering, University of KResearch & teaching аssistant prentice
1990Faculty of Mechanical Engineering, University of KResearch & teaching аssistant prentice
1994Faculty of Mechanical Engineering, University of KResearch & teaching assistant
1998Faculty of Mechanical Engineering, University of KResearch & teaching assistant
2001Faculty of Mechanical Engineering, University of KAssistant professor
2006Faculty of Mechanical Engineering, University of KAssociate professor
2011Faculty of Mechanical Engineering, University of KFull professor

PROFESSIONAL BIOGRAPHY - IMPROVEMENTS
YearInstitutionDuration
2005Advanced Experts training of TestXpert software application, Germany, Zwick/Roell Comp., Ulm27.11. – 03. 12.
2006Training course: Advanced Modern approach in adult education, Regional center for permanent education, Kragujevac, Serbia17.02. – 18.02.

AWARDS AND RECOGNITIONS
YearName of award/recognition
1995Special diploma of Faculty of mechanical engineering in Kragujevac for contribution in faculty development
2006Regional center for permanent education in Kragujevac diploma for successfully realized seminar: New technologies of sheet metal plastic forming
1978November award of the Svetozar Marković University on Kragujevac for students results
1982November award of the Svetozar Marković University on Kragujevac for students results

Other
In elementary and high school diplomas: VUK KARADŽIĆ for general school achievements. In elementary school diploma MIHAILO PETROVIĆ ALAS for mathematical achievements , diploma STEVAN MOKRANJAC for arts achievements. About 3 years of engineering practice in Zavodi Crvena Zastava Comp. (Commercial Vehicles Division, and Institute of Automobiles). Jobs: Metals forming tools design; Design of Car body parts.

RESULTS OF SCIENTIFIC AND RESEARCH WORK
Papers published in international scientific journals
  1. K. Zelic, A. Vukicevic, G. Jovicic, S. Aleksandrovic, N. Filipovic, M. Djuric, Mechanical weakening of devitalized teeth: three dimensional Finite Element Analysis and prediction of tooth fracture, International Endodontic Journal, Vol.48, No.9, pp. 850-863, ISSN 0143-2885, 2015
  2. Milan T. Djordjević, Srbislav Aleksandrović, Dušan Arsić, Ružica R. Nikolić, Janusz Szmidla, Aleksandar Todić, Dragan Čukanović, Robert Ulewicz, Influence of TiN Coating on the Drawing Force and Friction Coefficient in the Deep Drawing Process of AlMg4.5Mn0.7 Thin Sheets, Materials, Vol.16, No.11, pp. 1-15, ISSN 1996-1944, Doi https://doi.org/10.3390/ma16113968, 2023
  3. D. Jevremovic, T. Puskar, B. Kosec, Dj. Vukelic, I. Budak, S. Aleksandrovic, D. Egbeer, R. Williams, THE ANALYSIS OF THE MECHANICAL PROPERTIES OF F75 Co-Cr ALLOY FOR USE IN SELECTIVE LASER MELTING (SLM) MANUFACTURING OF REMOVABLE PARTIAL DENTURES (RPD), Metalurgija (Metalurgy), Vol.51, No.2, pp. 171-174, ISSN 0543-5846, 2012
  4. V. Lazić, S. Aleksandrović, D. Arsić, A. Sedmak, A. Ilić, M. Djordjević, L. Ivanović, The influence of temperature on mechanical properties of the base material (BM) and welded joint (WJ) made of steel S690QL, Metalurgija (Metalurgy), Vol.55, No.2, pp. 213-216, ISSN 0543-5846, 2016
  5. Dragan Adamovic, Milentije Stefanovic, Srbislav Aleksandrovic, Zvonko Gulisija, ESTIMATION OF LUBRICANTS FOR IRONING OF STEEL AND AL-ALLOYS, JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, Vol.16, No.6, pp. 125-135, ISSN 1310-4772, 2009
  6. Srbislav Aleksandrovic, Milentije Stefanovic, Dragan Adamovic, Vukic Lazic, VARIATION OF NORMAL ANISOTROPY RATIO r DURING THE PLASTIC FORMING, Strojniski vestnik - Journal of Mechanical Engineering, Vol.55, No.6, pp. 392-399, ISSN 0039-2480, 2009
  7. Vukic Lazic, Aleksandar Sedmak, Miroslav Zivkovic, Srbislav Aleksandrovic, Rajko Cukic, Radomir Jovicic, Ivana Ivanovic, THEORETICAL-EXPERIMENTAL DETERMINING OF COOLING TIME (T8/5) IN HARD FACING OF STEELS FOR FORGING DIES, THERMAL SCIENCE, Vol.14, No.1, pp. 15-25, ISSN 0354-9836, 2009
  8. Vukić Lazić, Aleksandar Sedmak, Srbislav Aleksandrović, Dragan Milosavljević, Rajko Čukić, Vencislav Grabulov, REPARATION OF DAMAGED MALLET FOR HAMMER FORGING BY HARD FACING AND WELD CLADDING, Tehnički vjesnik/Technical Gazette, Slavonski Brod, Hrvatska, Vol.16, No.4, pp. 107-113, ISSN 1330-3651, 2009
  9. B. Nedeljkovic, M. Babic, M. Mutavdzic, N. Ratkovic, S. Aleksandrovic, R. Nikolic, V. Lazic, REPARATORY HARD FACING OF THE ROTATIONAL DEVICE KNIVES FOR TERRAIN LEVELING, Journal of the Balkan Tribological Association, Vol.16, No.1, pp. 46-57, ISSN 1310-4772, 2010
  10. Dragan Adamovic, Vesna Mandic, Zoran Jurkovic, Branko Grizelj, Milentije Stefanovic, Tomislav Marinkovic, Srbislav Aleksandrovic, AN EXPERIMENTAL MODELLING AND NUMERICAL FE ANALYSIS OF STEEL-STRIPE IRONING PROCESS, Tehnički vjesnik/Technical Gazette, Vol.17, No.4, pp. 435-444, ISSN 1330-3651, 2010
  11. Srbislav Aleksandrović, Vlatko Marušić, Tomislav Vujinović, Leon Maglić, INFLUENCE OF VARIABLE BLANK HOLDING FORCE AND NONMONOTONOUS PROCESS OF DEEP DRAWING ON FORMABILITY OF COATED SHEETS, Strojarstvo-Journal for Theory and Application in Mechanical Engineering, Zagreb, Hrvatska, Vol.52, No.2, pp. 159-168, ISSN 0562-1887, 2010
  12. Vukic Lazic, Milorad Jovanovic, Aleksandar Sedmak, Srbislav Aleksandrovic, Dragan Milosavljevic, Bozidar Krstic, Rajko Cukic, ENERGETIC ANALYSIS OF HARD FACING AND WELD CLADDING OF AN AIR POWERED DROP HAMMER DAMAGED RAM, Thermal Science, Vol.14, No.2, pp. 12-20, ISSN 0354-9836, Doi 10.2298/TSCI100501021L, 2010
  13. S. Aleksandrović, M. Stefanović, D. Adamović, V.Lazić, M. Babić, R. Nikolic, T. Vujinovic, VARIABLE TRIBOLOGICAL CONDITIONS ON THE FLANGE AND NONMONOTONOUS FORMING IN DEEP DRAWING OF COATED SHEETS, Journal of the Balkan Tribological Association, Vol.17, No.2, pp. 165-178, ISSN 1310-4772, 2011
  14. S. Aleksandrovic, M. Babic, B. Nedeljkovic, T. Vujinovic, D Taranovic, V.Lazić, D. Milosavljevic, VARIABLE DRAWBEAD HEIGHT AND VARIABLE CONTACT PRESSURE AS TRIBOLOGICAL INFLUENCES IN SHEET METAL STRIPE SLIDING TEST, Journal of the Balkan Tribological Association, Vol.18, No.2, pp. 184-194, ISSN 1310-4772, 2012
  15. Srbislav Aleksandrović, Tomislav Vujinović, Milentije Stefanović, Dragan Adamović, Vukić Lazić, Dragan Taranović, VARIABLE CONTACT PRESSURE AND VARIABLE DRAWBEAD HEIGHT INFLUENCE ON DEEP DRAWING OF AL ALLOYS SHEETS, Strojarstvo-Journal for Theory and Application in Mechanical Engineering, Vol.54, No.2, pp. 109-115, ISSN 0562-1887, 2012
  16. Vukic Lazic, Aleksandar Sedmak, Dragan Milosavljevic, Ilija Nikolic, Srbislav Aleksandrovic, Ruzica Nikolic, Milan Mutavdzic, THEORETICAL AND EXPERIMENTAL ESTIMATION OF THE WORKING LIFE OF MACHINE PARTS HARD FACED WITH AUSTENITE - MANGANESE ELECTRODES ., Materiali in tehnologije / Materials and technology, Vol.46, No.5, pp. 547–554, ISSN 1580-2949, 2012
  17. D. Arsić, V. Lazić, I. Samardžić, R. Nikolić, S. Aleksandrović, M. Djordjević, B. Hadzima, Of the hard facing technology and the filler metal on tribological characteristics of the hard faced forging dies,, Tehnički vjesnik/Technical Gazette, Vol.22, No.5, pp. 1353-1358, ISSN 1330-3651, 2015
  18. D. Milosavljević, G. Bogdanović, V. Lazić, S. Aleksandrović, M. Lazić, Bulk waves and dynamical behaviour in elastic solids reinforced by two families of strong fibres, Journal of Engineering Mathematics, Vol.95, No.1, pp. 59-72, ISSN 0022-0833, 2015
  19. V. Lazić, A. Sedmak, R. Nikolić, M. Mutavdžić, S. Aleksandrović, B. Krstić, D. Milosavljević, SELECTION OF THE MOST APPROPRIATE WELDING TECHNOLOGY FOR HARDFACING OF BUCKET TEETH, Materijali in tehnologije, Vol.49, No.1, pp. 165-172, ISSN 1580-2949, 2015
  20. D. Arsić, M. Djordjević, J. Zivković, A. Sedmak, S. Aleksandrović, V. Lazić and D. Rakić, Experimental-numerical study of tensile strength of the high-strength steel S690QL at elevated temperatures, Strength of Materials, Vol.48, No.5, pp. 687-695, ISSN 0039-2316, 2016
  21. D. Arsić, V. Lazić, S. Aleksandrović, M. Babić, D. Milosavljević: M. Đorđević, Reparatory hard-facing of working parts made of martensitic stainless steel in confectionary industry, Journal of Balkan Tribological Association, Vol.22, No.1А-1, pp. 605-618, ISSN 1310-4772, 2016
  22. D. Arsić, V. Lazic, S. Mitrović, D. Džunić, S. Aleksandrović, M. Djordjević, B. Nedeljković, Тribological behavior of four types of filler metals for hard facing under dry conditions, Industrial lubrication and tribology, Vol.68, No.6, pp. 729-736, ISSN 0036-8792, 2016
  23. M. Đorđević, D. Arsić, S. Aleksandrović, V. Lazić, D. Milosavljević, R. Nikolić, Comparative study of an environmentally friendly single-bath lubricant and conventional lubricants in a strip ironing test, Journal of Balkan Tribological Association, Vol.22, No.1А-2, pp. 947-958, ISSN 1310-4772, 2016
  24. M. Djordjević, S. Aleksandrović, D. Arsić, V. Lazic, Experimental-numerical analysis of contact conditions influence on the ironing strip drawing process, Industrial lubrication and tribology, Vol.69, No.4, pp. 464-470, ISSN 0036-8792, 2017
  25. M. Djordjević, V. Mandić, S. Aleksandrović, D. Arsić, V. Lazic, R. Nikolić, Z. Gulišija, Experimental-numerical analysis of contact conditions influence on the ironing strip drawing process, Industrial lubrication and tribology, Emerald Publishing, UK, Vol.69, No.4, pp. 464-470, ISSN 0036-8792, 2017
  26. Milan Djordjević, Srbislav Aleksandrović, Slaviša Djačić, Aleksandar Sedmak, Vukić Lazić, Dušan Arsić, Milan Mutavdžić, Simulation of Flat Die Deep Drawing Process by Variable Contact Pressure Sliding Model, Tehnički vjesnik, Vol.26, No.5, pp. 1199-1204, ISSN 1330-3651, 2019
  27. Dušan Arsić, Vukić Lazić, Aleksandar Sedmak, Srbislav Aleksandrović, Jelena Živković, Milan Djordjević, Goran Mladenović, Effect of the elevated temperatures on mechanical properties of the ultra high strength hot-work tool steel H11, FAMENA, Zagreb, Vol.44, No.2, pp. 71-82, ISSN 1333-1124, 2020
  28. Vlatko Marušić, Srbislav Aleksandrović, Bogdan Nedić, Andrijana Milinović, Investigation of the impact of hot forming the properties of seamless steel bottles for liquefied gases, Tehnički vjesnik, Vol.27, No.3, pp. 1025-1030, ISSN 1330-3651, 2020
  29. Todic Aleksandar, Djordjevic Milan, Arsic Dusan, Dzunic Dragan, Lazic Vukic, Aleksandrovic Srbislav, Krstic Bozidar, Influence of Vanadium Content on the Tribological Behaviour of X140CrMo12-1 Air-Hardening Steel, TRANSACTIONS OF FAMENA, Vol.46, No.2, pp. 15-22, ISSN 1333-1124, 2022
  30. R. R. Nikolić, B. Krstić, V. Lazić, I. Ž. Nikolić, S. Aleksandrović, I. Krstić and V. Krstić, DETERMINATION AND ANALYSIS OF INFLUENCE OF THE HYDRODYNAMIC, KINEMATIC AND GEOMETRIC PARAMETERS ON THE MOTOR VEHICLES HYDRODYNAMIC CLUTCH CHARACTERISTICS, Procedia Engineering, Vol.40, No.1, pp. 316 – 321, ISSN 1877-7058, 2012
  31. S. Rakić, V. Lazić, S. Aleksandrović, S. Mitrović, R. Nikolić, D. Milosavljević, R. Čukić, Reparatory and Manufacturing Hard-Facing of Working Parts Made of Stainless Steels in Confectionary Industry., Tribology in Industry, Vol.34, No.3, pp. 138-151, ISSN 0354-8996, 2012
  32. V. Lazić, S. Aleksandrović, R. Nikolić, R. Prokić-Cvetković, O. Popović, D. Milosavljević, R. Čukić, ESTIMATES OF WELDABILITY AND SELECTION OF THE OPTIMAL PROCEDURE AND TECHNOLOGY FOR WELDING OF HIGH STRENGTH STEELS, Procedia Engineering, Vol.40, No.1, pp. 310 – 315, ISSN 1877-7058, 2012
  33. D. Arsić, V. Lazić, R. Nikolić, S. Aleksandrović, P. Marinković, M. Đorđević, R. Čukić, APPLICATION OF THE S690QL CLASS STEELS IN RESPONSIBLE WELDED STRUCTURE, Materials Engineering - Materiálové inžinierstvo, Vol.20, No.4, pp. 174-183, ISSN 1335-0803, 2013
  34. M. Djordjević, S. Aleksandrović, V. Lazić, M. Stefanović, R. Nikolić, D. Arsić, EXPERIMENTAL ANALYSIS OF INFLUENCE OF DIFFERENT LUBRICANTS TYPES ON THE MULTI-PHASE IRONING PROCESS, Materials Engineering - Materiálové inžinierstvo, Vol.20, No.3, pp. 147-152, ISSN 1335-0803, 2013
  35. D. Arsić, V. Lazić, S. Aleksandrović, R. Nikolić, P. Marinković, M. Đorđević, N. Ratković, THEORETICAL-EXPERIMENTAL FRACTURE ANALYSIS OF A RESPONSIBLE MACHINE PARTS, Structural Integrity and Life, Vol.14, No.2, pp. 141-146, ISSN 1451-3749, 2014
  36. S. Aleksandrović, M. Đorđević, M. Stefanović, V. Lazić, D. Adamović, D. Arsić, Different Ways of Friction Coefficient Determination in Stripe Ironing Test, Tribology in industry, Vol.36, No.3, pp. 293-299, ISSN 0354-8996, 2014
  37. V. Lazić, R. Čukić, S. Aleksandrović, D. Milosavljević, D. Arsić, B. Nedeljković, M. Đorđević, Techno-Economic Justification of Reparatory Hard Facing of Various Working Parts of Mechanical Systems, Tribology in industry, Vol.36, No.3, pp. 287-292, ISSN 0354-8996, 2014
  38. Arsić, D., Djordjević, M., Aleksandrović, S., Lazić, V., Nikolić, R. R., Hadzima, B., Analysis of the austenitic stainless steel's r-value behavior at elevated temperatures, Materials Engineering - Materiálové inžinierstvo, Vol.22, No.2, pp. 66-76, ISSN 1335-0803, 2015
  39. D. Arsic, V. Lazic, R. Nikolic, S. Aleksandrovic, M. Djordjevic, B. Hadzima, J. Bujnak, Experimental determination of deformations of the hard faced samples made of steel for operating at elevated temperatures, Procedia Engineering, Vol.111, No.111, pp. 495-501, ISSN 1877-7058, 2015
  40. D. Arsic, V. Lazic, R. Nikolic, S. Aleksandrovic, M. Djordjevic, B. Hadzima, J. Vican, Influence of tempering on the deformation level of the multi-layer hard faced samples, Procedia Engineering, Vol.111, No.111, pp. 49-56, ISSN 1877-7058, 2015
  41. D. Arsić, V. Lazić, R. R. Nikolić, S. Aleksandrović, B. Hadzima, M. Đorđević, Optimal welding technology of high strength steel S690QL, Materials Engineering - Materiálové inžinierstvo, Vol.22, No.1, pp. 33-47, ISSN 1335-0803, 2015
  42. M. Djordjevic, S. Aleksandrovic, D. Arsic, V. Lazic, R. Nikolic, B. Hadzima, P. Kotes, Investigation of the lubricants influence on the ironing process, Procedia Engineering, Vol.111, No.111, pp. 149-154, ISSN 1877-7058, 2015
  43. V. Lazić, A. Sedmak, I. Samardžić, S. Aleksandrović, D. Arsić, D. Milosavljević, M. Đorđević, Shear strenght testing of hardfaced samples using special tool on an universal testing machine, Structural Integrity and Life, Vol.15, No.1, pp. 15-18, ISSN 1451-3749, 2015
  44. M. Djordjević, S. Aleksandrović, V. Lazić, D. Arsić, R. Nikolić, B. Hadzima, Investigation of the lubrication influence on single-phase and multi-phase ironing processes, Procedia Engineering, Vol.149, No.1, pp. 40 – 47, ISSN 1877-7058, 2016
  45. V. Lazić, D. Arsić, R. Nikolić, S. Aleksandrović, D. Rakic, M. Djordjević, B. Hadzima, Selection and analysis of material for boiler pipes in a steam plant, Procedia Engineering, Vol.149, No.1, pp. 216-223, ISSN 1877-7058, 2016
  46. S. Aleksandrović, S. Đačić, M. Đorđević, N. Ratković, D. Arsić, V. Lazić, New method of defining of process parameters in double side thinning strip ironing test, Tribology in industry, Vol.42, No.1, pp. 59-69, ISSN 0354-8996, 2020
Papers presented at international conferences
  1. M. Stefanovic, D. Adamovic, S. Aleksandrovic, FRICTION AT SHEET METAL TESTING BY IRONING IN CONDITIONS OF HIGH PRESSURE, INTERTRIBO, Strbske Pleso, Vysoke Tatry, Czechoslovakia, 1990, pp. 135- 136
  2. M. Stefanovic, S. Aleksandrovic, COMPLEX APPROACH TO TRIBO-MODELLING IN DEEP DRAWING OF THIN SHEETS, Balkantrib, Thessaloniki, Greece, 1996, pp. 214-221
  3. M. Stefanovich, S. Aleksandrovich, IMPORTANCE OF STRAIN ANALYSIS IN TRIBO-MODELING IN DEEP DRAWING, WORLD TRIBOLOGY CONGRESS, LONDON, 1997, 8-12 september, pp. 626
  4. M. Stefanovic, S. Aleksandrovic, TRIBO MODELLING IN STRETCHING OF THIN SHEETS, Symposium on Computational and Experimental Methods in Mechanical and Thermal Engineering, Gent, Belgium, 1998, may, pp. 85-90
  5. M. Stefanović, M. Milovanović, S. Aleksandrović, M. Radisavljević, NEW SHEET MATERIALS FOR AUTOMOTIVE PANELS AND THEIR FORMABILITY, 5th International Conference AMTECH '99, Plovdiv, Bulgaria, 1999, 23-25 june, pp. 588-595
  6. M. Stefanovic, S. Aleksandrovic, THE SIGNIFICANCE OF THE CHANGE OF CONTACT PRESSURE IN BLANK-HOLDER ZONE IN DEEP DRAWING, Balkantrib, Sinaia, Romania, 1999, pp. 249-256
  7. M. Stefanović, S. Aleksandrović, THE CHANGE OF CONTACT PRESSURE IN BLANK HOLDER ZONE AND TRIBOLOGICAL INFLUENCES ON DEEP DRAWING, 7th International conference on tibology, Budapest, Hungary, 2000, september, pp. 251-254
  8. M. Milovanović, M. Stefanović, S. Aleksandrović, M. Radisavljević, Need of introducing of new materials to the passanger car body in order to comply with regulations, Second Int. Conf. "Mechanical Engineering Technology ' 01", Sofia, Bulgaria, 2001
  9. M. Stefanovic, S. Aleksandrovic, Influence of variable contact conditions in deep drawing, Second World Tribology Congress, Wienna, 2001, pp. 381
  10. M. Stefanovic, S. Aleksandrovic, E. Romhanji, M. Milovanovic, Development and application of Al−alloys in manufacture of carbody elements, ICMEN, 1st International Conference of Manufacturing Engineering, Sani, Halkidiki, Greece, 2002, 3−4 oct., pp. 681−687
  11. S. Aleksandrovich, M. Stefanovich and T. Vujinovich, Variable tribological conditions on the blank holder as significant factor in deep drawing process, ITC 03 (8th International Tribology Conference), Belgrade, Serbia, 2003, 8.-10. october, pp. 368-372
  12. S. Aleksandrovitsh, M. Stefanovitsh, Significance and limitations of variable blank holding force application in deep drawing process, ICMEN 05, Kallithea, Chalkidiki, 2005, 5-7 october, pp. 245-253
  13. S. Aleksandrovitsh, M. Stefanovitsh, Z. Babitsh, Deep drawing of square pieces with variable tribological conditions on the flange, BALKANTRIB '05, 5th INTERNATIONAL CONFERENCE ON TRIBOLOGY, Kragujevac, 2005, pp. 65-69
  14. M. Stefanović, S. Aleksandrović, M. Samardžić, Mikrooblikovanje – mogućnosti i ograničenja, DEMI 2007, Banja Luka, RS (BiH), 2007, maj, pp. 181-186
  15. D. Adamovic, M. Stefanovic, M. Plancak, S. Aleksandrovic, Analysis of change of total drawing force and friction force on punch and ironing, ICMEN 2008, Kalithea, Greece, 2008, pp. 245-254
  16. M. Stefanovic, S. Aleksandrovic, M. Milovanovic, D. Adamovic, Formability of sheet materials for light automotive panels, ICMEN 2008, Kalithea, Greece, 2008, pp. 263-270
  17. . V. Lazić, M. Mutavdžić, D. Milosavljević, S. Aleksandrovic, B. Nedeljković, P. Marinković, R. Čukić, Selection of the Most Appropriate Technology of Reparatory Hardfacing of working Parts on Universal Construction Machinery, SERBIATRIB 2011, Kragujevac, 2011, pp. 240-249, ISBN 978-86-86663-74-0
  18. D. Adamović, M. Stefanović, S. Aleksandrovic, M. Živković, Z. Gulišija, The Influence of Various Process Parameters on Coefficient of Friction on Die at Ironing of AlMg3 Sheet Metals, SERBIATRIB 2011, Kragujevac, 2011, pp. 342-348, ISBN 978-86-86663-74-0
  19. D. Adamović, M. Stefanović, S. Aleksandrovic, M. Živković, Z. Gulišija, The Influence of Various Process Parameters on Coefficient of Friction on Die at Ironing of AlMg3 Sheet Metals, Serbiatrib, Kragujevac, 2011
  20. D. Adamovic, V. Mandic, M. Stefanovic, S. Aleksandrovic, M. Zivkovic, Z. Golusija, S. Randjelovic, Experimental and numerical determination of the tensile stresses in the wall during steel sheet ironing, ICMEN, Thessaloniki, 2011
  21. Đačić Slaviša, Milentije Stefanović, Srbislav Aleksandrovic, Dragan Adamović, Characteristics of Friction in Sheet Metal Sliding with Thickness Reduction, Serbiatrib, Kragujevac, 2011
  22. Đačić Slaviša, Milentije Stefanović, Srbislav Aleksandrovic, Dragan Adamović, Characteristics of Friction in Sheet Metal Sliding with Thickness Reduction, SERBIATRIB 2011, Kragujevac, 2011, pp. 366-369, ISBN 978-86-86663-74-0
  23. Dragan Adamovic, Milentije Stefanovic, Branislav Jeremic, Srbislav Aleksandrovic, The effects of shot peening on the fatigue life of machine elements, ICPE, Nis, 2011
  24. Dragan Adamovic, Milentije Stefanovic, Srbislav Aleksandrovic, Miroslav Zivkovic, Zvonko Gulisija, Slavisa Djacic, The influence of tool surface condition on ironing process execution, ICPE, Nis, 2011
  25. M. Stefanovic, D. Vilotic, M. Plancak, S. Aleksandrovic, D. Adamovic, Influence of strain history on limit formability in metal forming, ICMEN, Thessaloniki, 2011
  26. M. Stefanović, D. Vilotić, M. Plančak, S. Aleksandrović, Z. Gulišija, D. Adamović, Forming limit indicators in metal forming, DEMI 2011, Banja Luka, 2011, pp. 327-336
  27. M. Stefanović, S. Aleksandrović, D. Adamović, Paper about papers in the area of metal forming presented at DEMI conferences held so far, DEMI 2011, Banja Luka, 2011, pp. 391-398
  28. Milentije Stefanovic, Slavisa Djacic, Srbislav Aleksandrovic, Dragan Adamovic, Importance of tribological conditions at multi-phase ironing, ICPE, Nis, 2011
  29. S. Aleksandrovic, T. Vujinovic, M. Stefanovic , V. Lazic, D. Adamovic, Physical modelling of variable contact pressure and variable drawbead height influence on deep drawing of thin sheets, SERBIATRIB, Kragujevac, 2011
  30. S. Aleksandrovic, T. Vujinovic, M. Stefanovic , V. Lazic, D. Adamovic, Physical modelling of variable contact pressure and variable drawbead height influence on deep drawing of thin sheets, SERBIATRIB 2011, Kragujevac, 2011, pp. 358-365, ISBN 978-86-86663-74-0
  31. S. Aleksandrovic, T. Vujinovic, M. Stefanovic , V. Lazic, D. Adamovic, Computer controlled experimental device for investigations of tribological influences in sheet metal forming, DEMI 2011, Banja Luka, 2011, pp. 285-290
  32. S. Aleksandrovic, T. Vujinovic, M. Stefanovic, V. Lazic, D. Adamovic, S. Djacic, Adjustable drawbead and variable contact pressure as tribological influences in sheet metal stripe sliding test, ICMEN, Thessaloniki, 2011
  33. Srbislav Aleksandrovic, Tomislav Vujinovic, Milentije Stefanovic, Vukic Lazic, Dragan Adamovic, Variable contact pressure and variable drawbead height influence on deep drawing of Al alloys sheets, ICPE, Nis, 2011
  34. V. Lazić, M. Mutavdžić, D. Milosavljević, S. Aleksandrovic, B. Nedeljković, P. Marinković, R. Čukić, Selection of the Most Appropriate Technology of Reparatory Hardfacing of working Parts on Universal Construction Machinery, Serbiatrib, Kragujevac, 2011
  35. Vukic Lazic, Dragan Milosavljevic, Srbislav Aleksandrovic, Rajko Cukic, Bozidar Krstic, Gordana Bogdanovic, Determination of optimum tempering temperature in hard facing of the forging dies for working at elevated temperatures, ICPE, Nis, 2011
  36. Vukic Lazic, Dragan Milosavljevic, Srbislav Aleksandrovic, Rajko Cukic, Bozidar Krstic, Gordana Bogdanovic, Selection of the welding technology of reliable assemblies using GMAW process, ICPE, Nis, 2011
  37. Stefanović M., Aleksandrović S.., Stanojević M.Đ., Adamović D., Gulišija Z., Đorđević M, Ecological metal forming technologies -possibilities and limitations, KODIP, Budva, Montenegro, 2012, june, pp. 135-142, ISBN 978-9940-527-24-2
  38. Zvonko Gulišija; Marija Mihailović, Aleksandra Patarić, Zoran Janjušević, Milentije Stefanović, Srbislav Aleksandrović, Electromagnetic Casting Influence on the Mechanical Properties of as-cast 7075 Al alloy, IOC, Bor, Serbia, 2012, pp. 481-485, ISBN 978-86-7827-042-0
  39. . Dušan Arsić, Vukić Lazić, Ružica Nikolić, Srbislav Aleksandrović, Petar Marinković, Milan Đorđević, Application of high strength steel of the S690QL class for application to welded structures, SEMDOK 2013, Zilina, 2013, pp. 5-9
  40. . Lazic, M. Mutavdzic, R. Nikolic, S. Aleksandrovic, D. Milosavljevic, B. Krstic, R. Cukic, Influence of various type of rock aggregates on selection of the working parts material in civil engineering, SERBIATRIB 2013, Kragujevac, 2013, pp. 275-280
  41. . Stefanovic, D. Dzunic, V. Mandic, S. Aleksandrovic, D. Adamovic, S. Mitrovic, Increasing of tool life for hot forming using surface modification, SERBIATRIB 2013, Kragujevac, 2013, pp. 261-264
  42. A. Radakovic, D. Milosavljevic, G. Bogdanovic, Lj. Veljovic, S. Aleksandrovic, Second order failure criteria in laminate including the effect of shear stress, DEMI 2013, Banja Luka, 2013, pp. 193-200
  43. D. Adamovic, M. Stefanovic, S. Aleksandrovic, M. Zivkovic, F. Zivic, M. Topalovic, Analysis of tribological process during ironing of sheet metal made of AlMg3, SERBIATRIB 2013, Kragujevac, 2013, pp. 265-269
  44. D. Adamovic, V. Mandic, M. Stefanovic , S. Aleksandrovic, M. Zivkovic, Analysis of the temperature change on the tool and work piece during the ironing process, DEMI 2013, Banja Luka, 2013, pp. 299-306
  45. M. Djordjević, S. Aleksandrović, V. Lazić, M. Stefanović, R. Nikolić, D. Arsić, Influence of lubricants on the multiphase ironing process, SEMDOK 2013, Zilina-Terchova, 2013, 30 jan – 01 feb, pp. 22-26, ISBN ISBN 978-80-554-0629-9
  46. M. Stefanovic, D. Adamovic, M. Djorovic-Stanojevic, Z. Gulisija, S. Aleksandrovic, Development of new lubricants for metal forming, KODIP 2013, Budva, 2013, pp. 161-168
  47. M. Stefanovic, V. Mandic, Z. Gulisija, S. Aleksandrovic, D. Adamovic, Improving the quality of Al-alloys hot forging, DEMI 2013, Banja Luka, 2013, pp. 447-452
  48. S. Aleksandrovic, M. Stefanovic , V. Lazic, D. Adamovic, M. Djordjevic, D. Arsic, Different ways of friction coefficient determination in stripe ironing test,, SERBIATRIB 2013, Kragujevac, 2013, pp. 359-363
  49. S. Aleksandrovic, T. Vujinovic, M. Stefanovic , V. Lazic, M. Djordjevic, D. Milosavljevic, Defining of pressure and drawbead height functions in sheet metal stripe tensile test over drawbead with variable parameters, DEMI 2013, Banja Luka, 2013, pp. 397-402
  50. V. Lazic, R. Cukic, S. Aleksandrovic, D. Milosavljevic, R. Nikolic, B. Krstic, B. Nedeljkovic, Techno-economic justification for reparatory hard-facing of machine systems working parts, SERBIATRIB 2013, Kragujevac, 2013, pp. 281-285
  51. V. Lazic, R. Nikolic, S. Aleksandrovic, D. Arsic, M. Djordjevic, M. Mutavdzic, Selection of the Optimal Reparation Technology for Working Parts Subjected to Abrasive Wear, TRANSCOM 2013, Zilina, 2013, pp. 93-96
  52. V. Lazic, S. Aleksandrovic, R. Nikolic, P. Marinkovic, D. Arsic, M. Djordjevic, B. Krstic, Determination and Analysis of Causes for a Catastrophic Failure of a Responsible Machine Parts, DEGRADACIA KONSTRUKCNYCH MATERIALOV 2013, Zilina, 2013, pp. 70-76
  53. . Arsić, R. Nikolić, V. Lazić, B. Hadzima, S. Aleksandrović, M. Đorđević, Weldability estimates of some high strength steels, 42. International Conference Zvaranie 2014, Tatranska Lomnica, Slovakia, 2014, 12-14 november, pp. 11-21, ISBN 978-80-89296-17-0
  54. D. Arsić, M. Đorđević, V. Lazić, S. Aleksandrović, R. Nikolić, Selecting the optimal welding technology of high strength steel of the S690QL class, 19th International PhD students seminar SEMDOK 2014, Zilina-Terchova , Slovakia, 2014, 29-31 January, pp. 5-9, ISBN 978-80-554-0832-3
  55. Dušan Arsić, Vukić Lazić, Srbislav Aleksandrović, Dragan Milosavljević, Božidar Krstić, Petar Marinković, Milan Đorđević, Application of high strength steels for responsibles welded structures on motor vehicles, International Congress Motor Vehicles & Motors 2014, Kragujevac, 2014, October 9-10, pp. 453-458, ISBN 978-86-6335-010-6
  56. Jasmina Mikovic, Sandra Velickovic, Srbislav Aleksandrovic, Dragan Adamovic, Dobrivoje Catic, Application of Taguchi methods in testing tensile strength of polyethilene, 8th International Quality Conference, Kragujevac, 2014, May 23th, pp. 575-581, ISBN 978-86-6335-004-5
  57. M. Stefanovic, D. Adamovic, S. Aleksandrovic, Z. Gulisija, M. Milovanovic, M. Samardzic, Influence of contact conditions and strain path on stretching of steel and Al-alloy sheet metals, 5th International conference on Manufacturing Engineering ICMEN 2014, Thessaloniki, Greece, 2014, 1-3 october, pp. 51-60, ISBN 978-960-98780-9-8
  58. S. Aleksandrovic, T. Vujinovic, M. Stefanovic, V. Lazic, M. Djordjevic, D. Arsic, Influence of variable drawbead height and variable contact pressure in al alloy sheet strip drawing process, 5th International conference on Manufacturing Engineering ICMEN, Thessaloniki, Greece, 2014, 1-3 october, pp. 71-78, ISBN 978-960-98780-9-8
  59. Sandra Velickovic, Jasmina Mikovic, Dragan Adamovic, Srbislav Aleksandrovic, Jasna Glisovic, Dobrivoje Catic, Investigation of environmental factors influence on the mechanical properties of plastics, 8th International Quality Conference, Kragujevac, 2014, May 23th, pp. 527-533, ISBN 978-86-6335-004-5
  60. V. Lazić, R. Nikolić, B. Hadzima, S. Aleksandrović, D. Arsić, M. Đorđević, Experimental measurements of residual stresses in welding of steels operating at high temperatures, 42. International Conference Zvaranie 2014, Tatranska Lomnica, Slovakia, 2014, 12-14 november, pp. 57-67, ISBN 978-80-89296-17-0
  61. D. Arsić, M. Đorđević, S. Aleksandrović, V. Lazić, R. Nikolić, B. Hadzima, Variation of the normal anisotropy coefficient of austenitic stainless steel at elevated temperatures, 20th International PhD students seminar SEMDOK 2015, Zilina-Terchova, 2015, 28-30 January, pp. 5-8, ISBN 978-80-554-0981-8
  62. D. Arsic, V. Lazic, M. Mutavdzic, R. Nikolic, S. Aleksandrovic, S. Mitrovic, M. Djordjevic, Experimental investigation of wear resistance of models hard faced with various filler metals, International conference on Tribology SERBIATRIB 2015, Beograd, 2015, May 13–15, pp. 170-175, ISBN 978-86-7083-857-4
  63. M. Djordjevic, S. Aleksandrovic, V. Lazic, D. Arsic, M. Stefanovic , D. Milosavljevic, Two-phase ironing process in conditions of ecologic and classic lubricants application, International conference on Tribology SERBIATRIB 2015, Beograd, 2015, May 13–15, pp. 407-413, ISBN 978-86-7083-857-4
  64. M. Stefanovic , D. Adamovic, Z. Gulisija, S. Aleksandrovic, M. Kraisnik, V. Mandic, Characteristics and limitations of physical tribo-modelling in deep drawing of thin sheet metal, International conference on Tribology SERBIATRIB 2015, Beograd, 2015, May 13–15, pp. 382-387, ISBN 978-86-7083-857-4
  65. V. Lazić, D. Arsić, M. Mutavdžić, R. Nikolić, S. Aleksandrović, M. Đorđević, I. Samardžić, B. Hadzima, Technology for reparatory hard facing of snow plough blades, 8. International Scientific-Professional Conference „Design, production and service of welded constructions and products, SBZ 2015., Slavonski Brod, Croatia, 2015, 21-23 October, pp. 135-142, ISBN 978-953-6048-80-9
  66. V. Lazić, D. Arsić, R. Nikolić, S. Aleksandrović, M. Đorđević, B. Hadzima, Optimization of welding of the truck's rear axle semi-housing, 11th European Conference TRANSCOM 2015, Zilina, Slovak Republic, 2015, 22-24 June, pp. 172-177, ISBN 978-80-554-1047-0
  67. M. Djordjevic, S. Aleksandrovic, V. Lazic, R. R. Nikolic, D. Arsic, Influence of tribological conditions and continuously variable contact pressure on the process of the thin sheet sliding during the flat-die test, 6th International conference on Manufacturing Engineering ICMEN 2017, Thessaloniki, Greece, 2017, October 5-6, pp. 173-182, ISBN 978-618-80878-4-2
  68. S. Aleksandrović, S. Đačić, M. Đorđević, V. Lazić, D. Arsić, Influence of process parameters on the friction coefficient in AlMg3 alloy stripe ironing drawing test, International conference on Tribology SERBIATRIB 2017, Kragujevac, 2017, 17-19 maj, pp. 351-356, ISBN 978-86-6335-041-0
  69. S. Aleksandrović, S. Đačić, M. Stefanović, M. Đorđević, V. Lazic, D. Arsić, Influence of process parameters on the friction coefficient in one and multi phase steel strip drawing ironing test, DEMI 2017 Electrical and Mechanical Engineering and Information Technology, Banja Luka, 2017, May 26-29, pp. 77-86, ISBN 978-99938-39-73-6
  70. D. Arsić, V. Lazić, R. R. Nikolić, S. Aleksandrović, M. Djordjević, Mechanical properties of hot-work tool steel at elevated temperatures, 23rd International Seminar of Ph.D. Students "SEMDOK 2018", Western Tatras-Zuberec, Slovakia, 2018, January 24-26, pp. 7-12, ISBN 978-80-554-1411-9
  71. Lazić V., Arsić D., Ilić I., Aleksandrović S., Nikolić R., Đorđević M., Hadzima B., Qualification of the welding technology of the structural steel S355J2G3, 9th International symposium on steel bridges, Prague, Czech Republic, 2018, sept. 10-11, pp. Vol. 419, Article Number: 012019, ISBN DOI: 10.1088/1757-899X/419/1/012019
  72. Milan Đorđević, Srbislav Aleksandrović, Vukić Lazić, Dušan Arsić, Aleksandar Todić, Aleksandra Patarić, The possibilities for application of numerical simulation in the ironing process of thin sheets, 16th International conference on tribology SERBIATRIB '19, Kragujevac, 2019, 15-17 maj, pp. 405-412, ISBN 2620-2832
  73. Srbislav Aleksandrović, Đorđe Milosavljević, Accuracy of pure copper flow curves determination in compression tests, DEMI 2019, Banja Luka, RS, BiH, 2019, 24-25 maj, pp. 119-124, ISBN 978-99938-39-85-9
  74. Srbislav Aleksandrović, Slaviša Đačić, Milan Đorđević, Vukić Lazić, Dušan Arsić, Determination of corrected parameters in strip ironing process with double side thinning, International conference on tribology SERBIATRIB '19, Kragujevac, 2019, 15-15 maj, pp. 440-448, ISBN 2620-2832
  75. S. Đačić, S. Aleksandrović, D. Arsic, M. Delic, V. Lazic, Ironing process in conditions of constant and variable lateral force, DEMI 2021 (on-line), Бања Лука, 2021, 28-29 may, pp. 45-50, ISBN 978-99938-39-92-7
  76. V. Lazić, D. Arsić, S. Aleksandrović, M. Đorđević, M. Delić, Application of welding for the production of ballistic protective structures, 10th International Scientific Conference - IRMES 2022 - Research and Development of Mechanical Elements and Systems, Beograd, 2022, 26 may, pp. 189-192, ISBN 978‐86‐6060‐119‐5
  77. Đorđe Ivković, Dušan Arsić, Milan Mutavdžić, Vukić Lazić, Srbislav Aleksandrović, Milan Đorđević, Importance of tribological investigations in selecting the technology for reparation of working parts of construction mechanization, SERBIATRIB 23, Kragujevac, 2023, 17-19 maj, pp. 497-506, ISBN 978-86-6335-103-5
  78. Milan T. Djordjević, Srbislav Aleksandrović, Tomislav Vujinović, Dušan Arsić, Aleksandar Todić, Dragan Čukanović, Marko Delić, Influence of contact conditions on the process of thin sheet sliding during the flat die test, SERBIATRIB 23, Kragujevac, 2023, 17-19 maj, pp. 539-545, ISBN ISBN 978-86-6335-103-5
  79. M. Stefanovic, M. Slivic, S. Aleksandrovic, M. Samardzic, Comparison of tribological properties of steel and Al-alloys sheet metal intended for deep drawing, Balkan Trib 2008, Sofia, 2008
  80. Lazić, V., S. Aleksandrović, R. Nikolić, R. Prokić-Cvetković, O. Popović, D. Milosavljević, R. Čukić, Estimates of weldability and selection of the optimal procedure and technology for welding of high strength steels., 23rd Czech and Slovak International Conference Steel structures and bridges 2012, Podbanske, Slovakia, 2012, September 26-28, pp. 68, ISBN ISBN: 978-80-89619-00-9

Textbooks
  1. S. Aleksandrović, Production technologies (Metal Forming), Hand Book, Faculty of Mechanical Enginering, 2007.
  2. Advanced Processes for Plastic Forming, Faculty of Engineering, Moodle portal, Kragujevac 2018.
  3. Production Technology ( Technology of Plastic Forming), Moodle portal, Faculty of Engineering, Univ. of Kragujevac, 2017.
  4. Advanced Machining Systems and Processes (Metal Forming), Moodle portal, Fac. of Engineering, Univ. of Kragujevac, 2014.

COURSE BOOKS
  1. S. Aleksandrovic, M. Stefanovic: Metal forming Technology, basic University textbok, Faculty f Mechanical Engineering, University of Kragujevac, 2010.