FACULTY OF ENGINEERING KRAGUJEVAC
UNIVERSITY KRAGUJEVAC
CURRICULUM VITAE

GENERAL INFORMATION
First and last name
Year and place of birth
PositionFull professor
E-mail
Education-scientific / education–art field
University, faculty, organizational unit
Field and closer specialty

EDUCATION – DIPLOMAS
BACHELOR STUDIES
Year1980
Place-
Institution-
Headline-
Field-

TECHNICAL BIOGRAPHY – POSITIONS
YearInstitutionPosition
1994Research & teaching assistant
2001Assistant professor
2006Associate professor
2010-Full professor

PROFESSIONAL BIOGRAPHY - IMPROVEMENTS
YearInstitutionDuration
1984
1988
1992

AWARDS AND RECOGNITIONS
YearName of award/recognition
2010
2016
2010
2016
2017
2017
2017
2017
2018
2018
2018
2019-
2020

RESULTS OF SCIENTIFIC AND RESEARCH WORK
Papers published in international scientific journals
  1. N. Milošević, A. Sedmak, G. Bakić, V. Lazić, M. Milošević, G. Mladenović, A. Maslarević, Determination of the Actual Stress–Strain Diagram for Undermatching Welded Joint Using DIC and FEM, Materials, impact factor: 3.92, Vol.14, No.5, pp. 4691, ISSN 1996-1944, Doi 91. https://doi.org/10.3390/ma141646, 2021
  2. S. Marković, D. Arsić, R. Nikolić, V. Lazić, B. Hadzima, V. Milovanović, R. Dwornicka, R. Ulewicz, Exploitation characteristics of teeth flanks of gears regenerated by three hard-facing procedures, Materials, impact factor: 3.92, Vol.14, No.15, pp. 4203, ISSN 1996-1944, Doi https://doi.org/10.3390/ma14154203, 2021 materials-14-04203.pdf, 2021
  3. S. Marković, D. Arsić, R. Nikolić, V. Lazić, N. Ratković, B. Hadzima, J. Szmidla, R. Ulewicz, Analysis of the welding type and filler metal influence on performance of a regenerated gear, Materials, impact factor: 3.92, Vol.14, No.6, pp. 1496, ISSN 1996-1944, Doi https://doi.org/10.3390/ma14061496, 2021, 2021
  4. D. Arsić, V. Lazić, R. Nikolić, N. Sczygiol, B. Krstić, Dj. Ivković, B. Hadzima, F. Pastorek, R. Ulewicz, Weldability assessment of various steels by hard-facing, Materials, impact factor: -, Vol.15, No.9, pp. 1-16, ISSN 1996-1944, Doi https://doi.org/10.3390/ma15093082,, 2022
  5. V. Lazić, I. Ivanović, A. Sedmak, R. Rudolf, M. Lazić, Z. Radaković, Numerical analysis of temperature field during hardfacing process and comparasion with experimental results, Thermal Science, Vol.18, No.Suppl. 1, pp. S113-S120, ISSN 0354-9836, Doi -, 2014
  6. D. Milosavljević, G. Bogdanović, V. Lazić, S. Aleksandrović, M. Lazić, Bulk waves and dynamical behaviour in elastic solids reinforced by two families of strong fibres, Journal of Engineering Mathematics, Vol.95, No.Issue 1, pp. 59-72, ISSN 0022-0833, Doi 10.1007/s10665-014-9747-9, 2015
  7. D. Arsić, V. Lazić, A. Sedmak, R. Nikolić, S. Aleksandrović, M. Djordjević, R. Bakić, I. Samardžić, Selection of the optimal hard facing (HF) technology of damaged forging dies based on cooling time t8/5, Metalurgija - Metallurgy, Vol.55, No.1, pp. 103-106, ISSN 0543-5846, Doi -, 2016
    MET_55_1_103_106.pdf
  8. V. Lazić, A. Sedmak, I. Samardžić, S. Aleksandrović, D. Milosavljević, D. Arsić, M. Đorđević, Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies, Metalurgija - Metallurgy, Vol.55, No.1, pp. 91-94, ISSN 0543-5846, Doi -, 2016
    MET_55_1_91_94.pdf
  9. V. Lazić, S. Aleksandrović, D. Arsić, A. Sedmak, A. Ilić, L. Ivanović, M. Đorđević, The influence of temperature on mechanical properties of the base material and welded joint made of steel S690QL, Metalurgija, Vol.55, No.2, pp. 213-216, ISSN 0543-5846, Doi -, 2016
    MET_55_2_213_216.pdf
  10. A. Sedmak, M. Arsić, Ž. Šarkoćević, B. Medjo, M. Rakin, D. Arsić, V. Lazić, Remaining strength of API J55 steel casing pipes damaged by corrosion, International Journal of Pressure Vessels and Piping, impact factor: 2.23, Vol.188, No.4, pp. 1-10, ISSN 0308-0161, Doi Doi https://doi.org/10.1016/j.ijpvp.2020.104230,, 2020
  11. B. Krstić, V. Lazić, R. Nikolić, V. Jovanović, Possibilities determination of the optimal strategy for preventive maintenance of the motor vehicles’ clutch using the multicriteria optimization, Journal of the Balkan Tribological Association, Vol.15, No.4, pp. 611-619, ISSN 1310-4772, Doi -, 2009
  12. B., Nedeljković, M., Babić, M., Mutavdžić, N., Ratković, S., Aleksandrović, R., Nikolić, V., Lazić, Reparatory hard facing of the rotational device knives for terrain leveling, Journal of the Balkan Tribological Association, Vol.15, No.1, pp. 46-75, ISSN 1310-4772, Doi -, 2009
  13. N., Ratković, A., Sedmak, M., Jovanović, V., Lazić, R., Nikolić, B., Krstić, Quality analysis of Al-Cu joint realized by friction welding, Tehnički vjesnik - Tehnical Gazete, Vol.16, No.3, pp. 3-7, ISSN 1330-3651, Doi -, 2009
  14. N., Ratković, A., Sedmak, M., Jovanović, V., Lazić, R., Nikolić, B., Krstić, Physical and metallurgic changes during the friction welding of high-speed cutting steel and tempered steel, Tehnički vjesnik - Tehnical Gazete, Vol.16, No.3, pp. 27-31, ISSN 1330-3651, Doi -, 2009
  15. S., Aleksandrović, M., Stefanović, D., Adamović, V., Lazić, Variation og Normal Anisotropy Ratio “r” during Plastic Forming, Strojniški vestnik – Journal of Mechanical Engineering, Vol.55, No.6, pp. 392-399, ISSN 0039-2480, Doi -, 2009
  16. V., Lazić, A., Sedmak, S., Aleksandrović, D., Milosavljević, R., Čukić, V., Grabulov, Reparation of damaged mallet for hammer forging by hard facing and weld cladding, Tehnički vjesnik - Tehnical Gazete, Vol.16, No.4, pp. 107-113, ISSN 1330-3651, Doi -, 2009
  17. B., Krstić, M., Babić, V., Lazić, V., Raičević, M., Despotović, D., Milosavljević, V., Krstić, Determination analysis of temperature regimes, functional characteristics and sliding curves of a hydrodynamic clutch, Thermal science, Vol.13, No.2, pp. S247-S258, ISSN 0354-9836, Doi 10.2298/TSCI100412019K, 2010
  18. V., Lazić, A., Sedmak, M., Živković, S., Aleksandrović, R., Čukić, R., Jovičić, I., Ivanović, Theoretical-experimental determining of coolinig time (t8/5) in hard faciung of steels for forging dies, Thermal science, Vol.14, No.1, pp. 235-246, ISSN 0354-9836, Doi 10.2298/TSCI1001235L, 2010
  19. V., Lazić, M., Jovanović, A., Sedmak, S., Aleksandrović, D., Milosavljević, B., Krstić, R., Čukić, Energetic analysis of hard facing and weld cladding of an air powered drop hammer damaged ram, Thermal science, Vol.13, No.2, pp. S269-S284, ISSN 0354-9836, Doi 10.2298-TSCI100412019K, 2010
  20. S. Aleksandrović, M. Stefanović, D. Adamović, V. Lazić, M. Babić, R. Nikolić,, Variable tribological conditions on the flange and nonmonotonous forming in deep drawing of coated sheets, Journal of the Balkan Tribological Association, Vol.17, No.No 2, pp. pp. 165-178, ISSN 1310-4772, Doi -, 2011
  21. S. Aleksandrović, M. Babić, B. Nedeljković, T. Vujinović, D. Taranović, V. Lazić, Variable drawbead height and variable contact pressure as tribological influences in sheet metal stripe sliding test, Journal of the Balkan Tribological Association, Vol.18, No.2, pp. 184-194, ISSN 1310-4772, Doi -, 2012
  22. S. Aleksandrović, T. Vujinović, M. Stefanović, D. Adamović, V. Lazić, D. Taranović, Variable Contact Pressure and Variable Drawbead Height Influence on Deep Drawing of Al Alloys Sheets, Strojarstvo: Journal for Theory and Application in Mechanical Engineering, Vol.52, No.2, pp. 109-115, ISSN 0562-1887, Doi -, 2012
  23. V. Lazić, A. Sedmak, D. Milosavljević, I. Nikolić, S. Aleksandrović, R. Nikolić, M Mutavdžić, The working life theoretical and experimental estimates for machine parts hard faced using austenite-manganese electrodes, Materials and Tecnology, Vol.46, No.5, pp. 547-554, ISSN 1580-2949, Doi -, 2012
  24. D. Arsić, V. Lazić, I. Samardžić, R. Nikolić, S. Aleksandrović, M. Djordjević, B. Hadzima, Impact of the hard facing technology and the filler metal on tribological characteristics of the hard faced forging dies, Tehnički Vjesnik – Technical Gazette, Vol.22, No.5, pp. 1353-1538, ISSN 1330-3651, Doi -, 2015
    tv_22_2015_5_1353-1358.pdf
  25. V. Lazić, A. Sedmak, R. Nikolić, M. Mutavdžić, S. Aleksandrović, B. Krstić, D. Milosavljević, Selection of the most appropriate weld in technology for hard facing of bucket teeth, Materials and technology, Vol.49, No.1, pp. 165–172, ISSN 1580-2949, Doi UDK 621.791.92:539.375.6:539.92, 2015
  26. D. Arsić, M. Djordjević, J. Zivković, A. Sedmak, S. Aleksandrović, V. Lazić, D. Rakić, Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures, Strength of Materials, Vol.48, No.5, pp. 687-695, ISSN 0039-2316, Doi 10.1007/s11223-016-9812-x, 2016
  27. D. Arsić, V. Lazić, S. Aleksandrović, M. Babić, D. Milosavljević, M. Djordjević, N. Ratković, Reparatory hard-facing of working parts made of martensitic stainless steel in confectionary industry, Journal of Balkan Tribological Association, Vol.22, No.1A-I, pp. 605-618, ISSN 1310-4772, Doi Ref. No. 1207/07.07.2014, 2016
  28. D. Arsić, V. Lazić, S. Mitrović, D. Džunić, S. Aleksandrović, M. Đorđević, B. Nedeljković, Tribological behavior of four types of filler metals for hard facing under dry conditions, Industrial Lubrication and Tribology, Vol.68, No.6, pp. 729-736, ISSN 0036-8792, Doi 10.1108/ILT-10-2015-0156, 2016
  29. M. Đorđević, D. Arsić, S. Aleksandrović, V. Lazić, D. Milosavljević, R. Nikolić, V. Mladenović, Comparative study of an environmentally friendly single-bath lubricant and conventional lubricants in a strip ironing test, Journal of Balkan Tribological Association, Vol.22, No.1A-II, pp. 947-958, ISSN 1310-4772, 2016
  30. M. Djordjević, V. Mandić, S. Aleksandrović, V. Lazić, D. Arsić, R. R. Nikolić, Z. Gulišija, Experimental-numerical analysis of contact conditions influence on the ironing strip drawing process, Industrial Lubrication and Tribology, Vol.69, No.4, pp. 464-470, ISSN 0036-8792, Doi doi.org/10.1108/ILT-05-2016-0113, 2017
  31. A. Čabrilo, K. Gerić, M. Jovanović, V. Lazić, Weldability and Impact Energy Properties of High-Hardness Armor Steel, Journal of Materials Engineering and Performance, Vol.27, No.Issue 3, pp. 1281-1295, ISSN 1059-9495, Doi 10.1007/s11665-018-3211-3, 2018
  32. L. Ivanović, V. Marjanović, A. Ilić, B. Stojanović, V. Lazić, Correlations of mechanical properties and microstructure at specific zones of welded joint of high-strength low-alloy steels, Archives of Metallurgy and Materials, Vol.63, No.1, pp. 285-292, ISSN 1451-2092, Doi 10.24425/118939., 2018
  33. N. Ratković, V. Lazić D. Arsić, R. Nikolić, R. Prokić Cvetković, O. Popović, Microstructure in the joining zone during the friction welding of the two dissimilar steels, Industrial Lubrication and Tribology, impact factor: 0.798, Vol.70, No.2, pp. 401-407, ISSN 0036-8792, Doi Doi 10.1108/ILT-08-2017-023, 2018
  34. N. Ratković, V. Lazić, D. Arsić, R. Nikolić, R. Prokić Cvetković, O. Popović, Microstructure in the joining zone during the friction welding of the two dissimilar steels, Industrial Lubrication and Tribology, Vol.70, No.Issue: 2, pp. 401-407, ISSN 0036-8792, Doi https://doi.org/10.1108/ILT-08-2017-0234, 2018
  35. M. Djordjević, S. Aleksandrović, S. Djačić, A. Sedmak, V. Lazić, D. Arsić, M. Mutavdžić, Flat die sliding model with variable contact pressure in deep drawing process, Tehnicki Vjesnik – Technical Gazette, impact factor: 0.67, Vol.26, No.5, pp. 1199-1204, ISSN 1330-3651, Doi Doi https://doi.org/10.17559/TV-20161215205553, 2019
  36. M. Živković, M. Vuković, V. Lazić, V. Milovanović, V. Dunić, D. Kozak, D. Rakić:, Experimental and FE Modeling Investigation of Spot Welded Thin Steel Sheets, Tehnički vjesnik, impact factor: 0.686, Vol.26, No.1, pp. 217-221, ISSN 1330-3651, Doi https://doi.org/10.17559/TV-20190113163316, 2019
  37. D. Arsić, V. Lazić, A. Sedmak, S. Aleksandrović, J. Živković, M. Djordjević, G. Mladenović, Effect of the elevated temperatures on mechanical properties of the ultra high strength hot-work tool steel H11, Transactions of FAMENA, impact factor: 0.58, Vol.44, No.2, pp. 71-82, ISSN 1333-1124, Doi Doi https://doi.org/10.21278/TOF.44207, 2020
  38. B., Nedeljković, V., Lazić, S., Aleksandrović, B., Krstić, M., Mutavdžić, D. Milosavljević, M., Đorđević, Influence of the carbide type on tribological properties of the hard-faced layers, Metalurgija – Journal of Metallurgy, Vol.16, No.2, pp. 77-90, ISSN 0354-6306, Doi -, 2010
  39. D. Nikolić, R. R. Nikolić, B. Krstić, V. Lazić, I. Ž. Nikolić, I. Krstić, V. Krstić, Optimization of technical diagnostics procedures for hydroelectric power plants, Procedia Engineering, Vol.40, No.-, pp. 322-327, ISSN 1877-7058, Doi 10.1016/j.proeng.2012.07.102, 2012
  40. R. R. Nikolić, B. Krstić, V. Lazić, I. Ž. Nikolić, S. Aleksandrović, I. Krstić, V. Krstić, Determination and analysis of influence of the hydrodynamic, kinematic and geometric parameters on the motor vehicles hydrodynamic clutch characteristics, Procedia Engineering, Vol.40, No.-, pp. 316-321, ISSN 1877-7058, Doi 10.1016/j.proeng.2012.07.101, 2012
  41. S. Rakić, V. Lazić, S. Aleksandrović, S. Mitrović, R. Nikolić, D. Milosavljević, R. Čukić, Reparatory and Manufacturing Hard-Facing of Working Parts Made of Stainless Steels in Confectionary Industry, Tribology in Industry, Vol.34, No.3, pp. 138-151, ISSN 0354-8996, Doi -, 2012
  42. V. Lazić, S. Aleksandrović, R. Nikolić, R. Prokić-Cvetković, O. Popović, D. Milosavljević, Estimates of weldability and selection of the optimal procedure and technology for welding of high strength steels, Procedia Engineering, Vol.40, No.-, pp. 310-315, ISSN 1877-7058, Doi 10.1016/j.proeng.2012.07.100, 2012
  43. A. Todić, D. Čikara, V. Lazić, T. Todić, I. Čamagić, A. Skulić, D. Čikara, Examination of Wear Resistance of Polymer – Basalt Composites, Tribology in Industry, Vol.35, No.1, pp. 36-41, ISSN 0354-8996, Doi -, 2013
  44. D. Arsić, V. Lazić, R. Nikolić, S. Aleksandrović, P. Marinković, M. Đorđević, R. Čukić, Application of the S690QL class steels in responsible welded structure, Materials Engineering (MEMI), Vol.20, No.4, pp. 174-183, ISSN 1225-0803, Doi -, 2013
  45. M. Đorđević, S. Aleksandrović, V. Lazić, M. Stefanović, R. Nikolić, D. Arsić, Experimental analysis of influence of different lubricants types on the multi-phase ironing process, Materials Engineering (MEMI), Vol.20, No.3, pp. 147-152, ISSN 1225-0803, Doi -, 2013
  46. D. Arsić, V. Lazić, S. Aleksandrović, R. Nikolić, P. Marinković, M. Đorđević, N. Ratković, Theoretical-experimental fracture analisys of a responsible machine part, Integritet i vek konstrukcije, Vol.14, No.2, pp. 141-146, ISSN 1451-3749, Doi -, 2014
  47. S. Aleksandrović, M. Đorđević, M. Stefanović, V. Lazić, D. Adamović, D. Arsić, Different ways of friction coefficient determination in stripe ironing test, Tribology in Industry, Vol.36, No.3, pp. 293-299, ISSN 0354-8996, Doi -, 2014
  48. V. Lazić, R. Čukić, S. Aleksandrović, D. Milosavljević, D. Arsić, B. Nedeljković,, Techno-economic justification of reparatory hard facing of various working parts of mechanical systems, Tribology in Industry, Vol.36, No.3, pp. 287-292, ISSN 0354-8996, Doi -, 2014
  49. D. Arsić, M. Djordjević, S. Aleksandrović, V. Lazić, R. R. Nikolić, B. Hadzima, Analysis of the austenitic stainless steel's r-value behavior at elevated temperatures, Materials Engineering - Materiálové inžinierstvo, Vol.22, No.2, pp. 66-76, ISSN 1335-0803, Doi -, 2015
  50. D. Arsić, V. Lazić, R. Nikolić, B. Hadžima S. Aleksandrović, M. Đorđević, The optimal welding technology of high strength steel S690QL, Materials Engineering - Materiálové inžinierstvo, Vol.22, No.1, pp. 33-47, ISSN 1877-7058, Doi -, 2015
  51. D. Arsić, V. Lazić, R. Nikolić, S. Aleksandrović, M. Djordjević, B. Hadzima, J. Vičan, Influence of tempering on the deformation level of the multi-layer hard faced samples, Procedia Engineering, Vol.111, No.-, pp. 49-56, ISSN 1877-7058, Doi 10.1016/j.proeng.2015.07.034, 2015
  52. M. Djordjević, S. Aleksandrović, V. Lazić, D. Arsić, R. Nikolić, B. Hadzima, P. Koteš, Investigation of the lubricants influence on the ironing process, Procedia Engineering, Vol.111, No.-, pp. 149-154, ISSN 1877-7058, Doi 10.1016/j.proeng.2015.07.069, 2015
  53. V. Lazić, A. Sedmak, I. Samardžić, S. Aleksandrović, D. Arsić, D. Milosavljević, M. Đorđević, Shear strength testing of hard-faced samples using special tool on a universal testing machine, Structural Integrity and Life, Vol.15, No.1, pp. 11-18, ISSN 1451-3749, Doi -, 2015
  54. V. Lazić, D. Arsić, R. Nikolić, B. Hadzima, M. Mutavdžić, Experimental determination of mechanical characteristics of four types of stones and their influence on the construction machinery parts wear, Advanced Materials Research (Trans Tech Publications, Switzerland), Vol.1100, No.-, pp. 178-184, ISSN 978-3-03835-452-9, Doi 10.4028/www.scientific.net/AMR.1100.178, 2015, 2015
  55. V. Lazić, D. Arsić, R. Nikolić, S. Aleksandrović, M. Djordjević, B. Hadzima, J. Bujnak, Experimental determination of deformations of the hard faced samples made of steel for operating at elevated temperatures, Procedia Engineering, Vol.111, No.-, pp. 495-501, ISSN 1877-7058, Doi 10.1016/j.proeng.2015.07.122, 2015
  56. D. Arsić, V. Lazić, R. R. Nikolić, M. Mutavdžić, S. Aleksandrović, M. Djordjević, Influence of the sliding speed on the wear resistance of parts which operate in conditions without lubrication hard faced by the high-alloyed filler metal, Materials Engineering - Materialove inzinierstvo, Vol.23, No.2, pp. in press, ISSN 1335-0803, Doi -, 2016
  57. M. Djordjević, S. Aleksandrović, V. Lazić, D. Arsić, R. R. Nikolić, B. Hadzima, The variable contact pressure influence on the tensile force in the process of strip sliding in the flat die in ironing, Materials Engineering - Materialove inzinierstvo, Vol.23, No.1, pp. 74-83, ISSN 1335-0803, Doi -, 2016
  58. M. Đorđević, S. Aleksandrović, V. Lazić, D. Arsić, R. Nikolić, B. Hadzima, Investigation of the lubrication influence on single-phase and multi-phase ironing processes, Procedia Engineering, Vol.149, No.-, pp. 40-47, ISSN 1877-7058, Doi -, 2016
  59. N. Ratković, D. Arsić, V. Lazić, R. Nikolić, B. Hadzima, Microstructure in the joint friction plane in friction welding of dissimilar steels, Procedia Engineering, Vol.149, No.-, pp. 414-420, ISSN 1877-7058, Doi -, 2016
  60. N. Ratković, D. Arsić, V. Lazić, R. R. Nikolić, B. Hadzima, The contact and compacting pressures influences on the plastic deformation parameters of the friction welded joint, Materials Engineering - Materialove inzinierstvo, Vol.23, No.2, pp. 51-57, ISSN 1335-0803, Doi -, 2016
  61. N. Ratković, V. Lazić, D. Arsić, R. Nikolić, J. Meško, R. Nigrovič, Influence of the friction time on the shape and microstructure of the mixing zone of the friction welded joint, Manufacturing Technology, Vol.16, No.6, pp. 1355-1359, ISSN 1213-2489, Doi -, 2016
  62. R. Nigrovič, J. Meško, D. Arsić, V. Lazić, R. Nikolić, Influence of chemical composition of selected materials on the roughness on cutting edge and the width of HA, Manufacturing Technology, Vol.16, No.5, pp. 1078-1085, ISSN 1213-2489, Doi -, 2016
  63. V. Lazić, D. Arsić, R. Nikolić, B. Hadzima, Experimental determination of residual stresses in the hard-faced layers after hard-facing and tempering of hot work steels, Procedia Engineering, Vol.153, No.-, pp. 392-399, ISSN 1877-7058, Doi 10.1016/j.proeng.2016.08.139, 2016
  64. V. Lazić, D. Arsić, R. Nikolić, D. Rakić, S. Aleksandrović, M. Đorđević, B. Hadzima, Selection and analysis of material for boiler pipes in a steam plant, Procedia Engineering, Vol.149, No.-, pp. 216-223, ISSN 1877-7058, Doi -, 2016
  65. V. Lazić, D. Arsić, R. Nikolić, M. Mutavdžić, J. Meško, Reparation by Hard Facing of the Damaged Secondary Stone Crushers, Manufacturing Technology, Manufacturing Technology, Vol.16, No.2, pp. 375-380, ISSN 1213-2489, Doi -, 2016
  66. N. Ratković, D. Arsić, V. Lazić, R. Nikolić, B. Hadzima, P. Palček, A. Sedmak, Influence of friction welding parameters on properties of the Al-Cu joint, FME TRANSACTIONS, Vol.45, No.1, pp. 165-171, ISSN 1451-2092, Doi 10.5937/fmet1701165R, 2017, 2017
  67. V. Lazić, D. Arsić, R. R. Nikolić, D. Djordjević, R. Prokić-Cvetković, O. Popović, Application of the high strength steel HARDOX 450 for manufacturing of assemblies in the military industry, Key Engineering Materials, Vol.755, No.-, pp. 96-105, ISSN 1013-9826, Doi 10.4028/www.scientific.net/KEM.755.96, 2017
  68. V. Lazić, D. Arsić, R. R. Nikolić, M. Arsić, B. Hadzima, Selecting the low alloy-tempered steel for manufacturing the highly loaded responsible part, Communications, Vol.19, No.3, pp. 109-114, ISSN 1335-420, Doi -, 2017
  69. V. Lazić, D. Arsić, R. R. Nikolić, M. Arsić, B. Hadzima, Selecting the low alloy-tempered steel for manufacturing the highly loaded responsible parts, Communications, impact factor: -, Vol.19, No.3, pp. 109-114, ISSN 1335-4205, Doi -, 2017
  70. V. Lazić, D. Arsić, R. R. Nikolić, S. Aleksandrović, M. Đorđević, B. Hadzima, Welding of the tube girder cover made of the C-Mn steel, Materials Engineering - Materialove inzinierstvo (MEMI), Vol.24, No.1, pp. 26-35, ISSN 1335-0803, Doi -, 2017
  71. R. Nigrovič, J. Meško, R. Nikolić, V. Lazić, D. Arsić, B. Hadzima, Comparison of the PMMA mechanical properties after cutting by the laser beam and milling, FME TRANSACTIONS, impact factor: -, Vol.46, No.1, pp. 57-61, ISSN 1451-2092, Doi Doi 10.5937/fmet1801057N, 2018
  72. D. Arsić, R. Nikolić, V. Lazić, A. Arsić, Z. Savić, S. Djačić, B. Hadzima, Analysis of the cause of the girth gear tooth fracture occurrence at the bucket wheel excavator, Transportation Research Procedia, impact factor: -, Vol.40, No.1, pp. 413-418, ISSN 2352-1465, Doi Doi 10.1016/j.trpro.2019.07.060, 2019
  73. O. Popović, R. Prokić-Cvetković, Lj. Radović, Z. Burzić, D. Arsić, The effect of heat input on the fracture behaviour of surface weld metal of rail steel, Structural Integrity and Life, impact factor: -, Vol.20, No.1, pp. 77-81, ISSN 1451-3749, Doi -, 2020
  74. S. Aleksandrović, S. Đačić, M. Đorđević, N. Ratković, D. Arsić, V. Lazić, New method of defining of process parameters in double side thinning strip ironing test, Tribology in Industry, impact factor: -, Vol.42, No.1, pp. 59-69, ISSN 0354-8996, Doi Doi 10.24874/ti.2020.42.01.06, 2020
  75. V. Lazić, R. Nikolić, D. Arsić, M. Arsić, O. Popović, R. Prokić Cvetković, B. Hadzima, Analysis of welding of the rear bridge semi-housing assembly of a firefighter truck by the semi-automatic procedure in gas protection, Transportation Research Procedia, impact factor: -, Vol.55, No.-, pp. 544-552, ISSN 2352-1465, Doi Doi 10.1016/j.trpro.2021.07.020, 2021, 2020
Papers presented at international conferences
  1. D., Josifović, M., Jovanović, V., Lazić, D., Adamović, N. Ratković, Reparatory hard-facing of the machine systems parts, Tenth International JOM-Jubilee-Conference JOM-10, Helsingor, Denmark, 2001, May 11-14
  2. В., Лазић, М., Јовановић, Н., Ратковић, Д., Адамовић, Процена отпорности на смицање модела наварених ковачких алата, Међународна конференција, Заваривање 2001, "Стање и перспектива заваривања на почетку новог века", Београд, 2001
  3. М., Јовановић, В., Лазић, Д., Јосифовић, Д., Адамовић, Н. Ратковић, Регенерација наваривањем различитих делова машинских система, Међународна конференција Заваривање 2001, "Стање и перспектива заваривања на почетку новог века", Београд, 2001
  4. В., Лазић, М., Јовановић, Д., Адамовић, М., Мутавџић, Репаратурно наваривање алата за обраду земљишта изложених абразивном хабању, Заваривање 2003., Београд, 2003
  5. В., Лазић, М., Јовановић, Д., Адамовић, Н., Ратковић, Избор најповољније технологије репаратуре ковачких алата из аспекта триболошких карактеристика, Заваривање 2003., Београд, 2003
  6. Д., Јосифовић, М., Јовановић, В., Лазић, Оптимизација режима заваривања челика повишене јачине, Први међународни научно-стручни скуп "Тешка машиноградња", Крушевац-Врњачка Бања, Југославија, 1993, Октобар, ISBN 340-345
  7. D., Josifović, M., Jovanović, V., Lazić, The effect of welding conditions on the heat affected zone mechanical properties in low-alloy steel arc welding, 15th Conference on Materials Testing in Metallurgy and 11th Congress on Materials Testing, Baltonszeplak, Hungary, 1994, pp. 343/348
  8. В., Лазић, Д., Јосифовић, М., Јовановић, Оцена тачности емпиријских израза за прорачун времена хлађења при заваривању, Међународно саветовање - Заваривање '94, Нови Сад, 1994, pp. 59-62
  9. В., Лазић, Д., Адамовић, Д., Јосифовић, М., Јовановић, Побољшање поступка заваривања склопа задњег моста камиона аутоматским поступком у заштити гаса, Међународно саветовање-Заваривање '96, Београд, 1996, pp. 84-87
  10. M., Jovanović, D., Josifović, D., Rajačić, V., Lazić, D. Adamović, Selection of Optimal Technology for Welding Tube to Housing of the Truck Rear Axle, 8. International Conference on the Joining of Materials JOM-8, Helsingor - DK, 1997, pp. 194-199
  11. V., Lazić, D., Josifović, D., Adamović, M., Jovanović, Design and application of apparatus for welding the truck body assembly in the protective gasses atmosphere, 5th European Conference on Advanced Materials, Processes and Applications, Euromat '97, Maastricht - NL, 1997, 21-23 April, pp. 471-474
  12. В., Лазић, М., Јовановић, Д., Рајачић, Д., Јосифовић, Д., Адамовић, Наваривање куке камионске дизалице, Међународна конференција "Заваривање у одржавању и превентивном инжењерингу", Београд, 1997, 24-25 септембар
  13. M., Jovanović, D., Josifović, V., Lazić, D., Adamović, V., Nedić, Determination of Optimum Relaxation Temperature in Hard Facing of the Forging Dies for Working at Elevated Temperatures, JOM 9, Heslingor, Denmark, 1999, pp. 312-317
  14. M., Jovanović, V., Lazić, D., Josifović, D., Adamović, B., Nedić, V., Nedić, Optimization of the Hard Facing Process of Forging Dies from the Aspect of Tribological Characteristics, AMTECH 99, Plovdiv, Bulgaria, 1999, pp. 474-479
  15. V., Lazić, D., Adamović, D., Josifović, M., Jovanović, B., Nedeljković, J., Ristović, Determination of the cooling rate and its influence on the hard-faced forging dies properties, Second International Conference on Education in Welding, Birekord-Denmark, 2000, October 15-17
  16. В., Лазић, М., Јовановић, Н., Ратковић, Д., Адамовић, Р., Вуловић, Процена отпорности на хабање наварених слојева изведених манганском електродом, X Југословенска конференција - Железничко машинство са међународним учешћем, Ниш, 2002, pp. 207-212
  17. M., Jovanović, V., Lazić, N., Ratković, D., Adamović, M. Mutavdžić, Estimate of wear resistance of the hard-faaced layers made by manganese electrode, 11th International Scietific Conference, University of Žilina, Slovak Republic, 2003, 17-19. 09., pp. 105-108
  18. V., Lazić, M., Jovanović, D. Josifović, N., Ratković, D., Adamović, Regeneration damaged working parts of forging presses and hammers by the welding and hard facing procedures, JOM – 11, Eleventh International Conference on the Joining of Materials, Helsingor, Denmark, 2003, May 25-28
  19. В., Лазић, М., Јовановић, Д., Адамовић, М., Мутавџић, Утицај врсте карбида на триболошке карактеристике наварених слојева, Осма интернационална конференција о трибологији, -, 2003, 8- 10 Октобар, pp. 111-121
  20. В., Лазић, М., Јовановић, Р. Вуловић, Д., Адамовић, Спајање месинга и нискоугљеничних челика електроотпорским лемљењем, Заваривање 2003., Међународна конференција, Београд, 2003
  21. Д., Адамовић, М. Стефановић, В., Лазић, Б., Недић, Утицај триболошких услова на храпавост површине лима при обради дубоким извлачењем са стањењем дебљине зида, Осма интернационална конференција о трибологији, -, 2003, 8- 10 Октобар, pp. 351–359
  22. М., Мутавџић, М., Јовановић, В., Лазић, Н., Ратковић, Д., Адамовић, Избор оптималне технологије репаратуре делова изложених хабању, XI Југословенска конференција - Железничко машинство са међународним учешћем, ЖЕЛКОН 04, Ниш, 2004, pp. 277-282
  23. R., Vulović, V., Lazić, M., Jovanović, R., Nikolić, D., Adamović, Selection of the welding technology of reliable joints using gmaw proces, V Medjunarodna konferencija, Teška mašinogradnja, Kraljevo, 2005, pp. II A.5–II A.8
  24. V., Lazić, M., Živković, D., Rakić, M., Jovanović, D., Adamović, : Theoretical-experimental determining of cooling time (t8/5) in hard facing, The fifth international conference HEAVY MACHINERY HM 2005, Kraljevo, 28 June – 03 July 2005., pp. II A.17–A 20., The fifth international conference HEAVY MACHINERY HM 2005, Kraljevo, 2005, 28 June – 03 July, pp. II A.17–A 20
  25. В., Лазић, М., Јовановић, Д., Адамовић, Р., Николић, Избор технологије заваривања и контроле одговорних заварених спојева, 30. Јубиларно саветовање производног машинства СЦГ са међународним учешћем, Врњачка Бања, 2005, 01-03. септембар, pp. 297-302
  26. Д., Адамовић, М. Стефановић, В., Лазић, М., Живковић, Н., Марјановић, Истраживање утицаја материјала алата и мазива на силу дубог извлачења са стањењем зида, 30. Јубиларно саветовање производног машинства СЦГ са међународним учешћем, Врњачка Бања, 2005, 01-03. септембар, pp. 303-308
  27. V., Lazić, M., Jovanović, D., Adamović, D., Josifović, N., Ratković, Development and application of welding technologies for regeneration of damaged working parts of forging presses and hammers, Weding and Joining Technologies for a Sustainble Development and Environment, Timisoara, Romania, 2006, 24-26.05., pp. 341-346
  28. В. Лазић, М. Јовановић, М. Живковић, Д. Адамовић, Н. Ратковић, Избор и провера технологије репаратуре одговорног процесног постројења, Регионално коришћење енергије у металургији и процесној индустрији, Београд, 2006, 16-17 март, pp. 6 страница
  29. М., Мутавџић, М., Јовановић, В., Лазић, Б., Недић, С., Ракић, Моделска испитивања додатних материјала намењених регенерацији оштећених делова железничке опреме, XII Научно-стручна Конференција о Железници са међународним учешћем - ЖЕЛКОН '06, Ниш, 2006, pp. 321-324
  30. Р., Чукић, В., Лазић, М., Јовановић, М., Мутавџић, С., Ракић, Техно-економска оправданост репаратурног заваривања и наваривања различитих делова техничких система, XII Научно-стручна Конференције о Железници са међународним учешћем - ЖЕЛКОН '06, Ниш, 2006, pp. 325-328
  31. В., Лазић, М., Јовановић, Н., Ратковић, М. Мутавџић, Примена напредних технологија наваривања при репаратури различитих делова машинских система, Конференција одржавања "КОД - 2007", Тиват, Црна Гора, 2007, 27-30 Јун
  32. A., Ilić, D., Josifović, V., Lazić, Experimental determination of the construction form influence on stress concentration in welded joints, 8th Youth Symposium on Experimental Mechanics, Györ – Hungary, 2008, 20-23 Maj, pp. 6-7, ISBN 978-963-9058-26-2
  33. V., Lazić, M., Jovanović, B., Nedeljković, R., Vulović, D., Đorđević, Design and application of apparatus for welding the truck body assembly in the protective gasses atmospher, The 5th International Symposium KOD 2008, Novi Sad, 2008, 15-16 April, pp. 237-242, ISBN 978-86-7892-104-9
  34. V., Lazić, M., Živković, M., Vuković, Experimental – numerical method of determination of the most appropriate technology of spot welding, extended abstract title, 25th Danubia-Adria Symposium on Advances in Experimental Mechanics held in Ceske Budejovice, Ceske Budejovice, 2008, 24-27 Septembar, pp. 149-150, ISBN 978-80-01-04162-
  35. A. Ilić, D. Josifović, V. Lazić, L. Ivanović, Experimental determination of stress concentration influence on welded constructions stability, The 7th International scientific conference - research and development of mechanical elements and systems, IRMES 2011, Zlatibor, 2011, 27-28 April, ISBN 978-86-6055-012-07
  36. A. Ilić, D. Josifović, V. Lazić, L. Ivanović, Mechanical properties of welded joints at steel tubes with square cross section, 34th International conference on production engineering – ICPE 2011, Niš, 2011, 28-30 Septembar, pp. 465-468, ISBN 978-86-6055-019-6
  37. N. Bojić, Z. Jugović, R. Nikolić, V. Lazić, R. Čukić, Determination of optimal way for the diagonal sieves joining, The 7th International scientific conference - research and development of mechanical elements and systems, IRMES 2011, Zlatibor, 2011, 27-28 April, pp. 219-224, ISBN 978-86-6055-012-07
  38. R. Prokić-Cvetković, R. Jovičić, V. Lazić, O. Popović, M. Burzić, D. Cvetković, Possibilities of Improving Properties of MicroAlloyed Steel Weld Metal by Choice of Welding Process and Technology, 15th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2011, Prague, Czech Republic, 2011, 12-18 September, pp. 721 – 724, ISBN 1840-4944
  39. S. Aleksandrović, T. Vujinović, M. Stefanović , V. Lazić, D. Adamović, Physical modelling of variable contact pressure and variable drawbead height influence on deep drawing of thin sheets, SERBIA TRIB '11, Kragujevac, 2011, 11-13 Maj, pp. 358-365, ISBN 978-86-86663-74-0
  40. S. Aleksandrović, T. Vujinović, M. Stefanović, V. Lazić, D. Adamović, Computer controlled experimental device for investigations of tribological influences in sheet metal forming, 10th Anniversary International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology - DEMI 2011, Banja Luka, 2011, 26-28 Maj, pp. 285-290, ISBN 978-99938-39-36-1
  41. S. Aleksandrović, T. Vujinović, M. Stefanović, V. Lazić, D. Adamović, Variable contact pressure and variable drawbead height influence on deep drawing of al alloys sheets, 34th International conference on production engineering – ICPE 2011, Niš, 2011, 28-30 Septembar, pp. 277-280, ISBN 978-86-6055-019-6
  42. S. Aleksandrović, T. Vujinović, M. Stefanović, V. Lazić, D. Adamović, S. Đačić, Adjustable drawbead and variable contact pressure as tribological influences in sheet metal stripe sliding test, 4th International conference on Manufacturing Engineering (ICMEN), Thessaloniki, 2011, 03-05 Oktobar, pp. 597-605, ISBN 978-960-98780-4-3
  43. V. Krstić, B. Krstić, V. Lazić, Possibility of determination the routes for transportation of hazardous goods on the basis of the risk level, 10th Anniversary International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology - DEMI 2011, Banja Luka, 2011, 26-28 Maj, pp. 717-722, ISBN 978-99938-39-36-1
  44. V. Lazić, D. Milosavljević, S. Aleksandrović, R. Čukić, B. Krstić, G. Bogdanović, Determination of optimum temepering temperature in hard facing of the forging dies for working at elevated temperatures, 34th International conference on production engineering – ICPE 2011, Niš, 2011, 28-30. Septembar, pp. 469-472, ISBN 978-86-6055-019-6
  45. V. Lazić, D. Milosavljević, S. Aleksandrović, R. Čukić, B. Krstić, G. Bogdanović, Selection of the welding technology of reliable asemblies using GMAW process, 34th International conference on production engineering – ICPE 2011, Niš, 2011, 28-30. Septembar, pp. 473-476, ISBN 978-86-6055-019-6
  46. V. Lazić, M. Mutavdžić, D. Milosavljević, S. Aleksandrović, B. Nedeljković, P. Marinković, R. Čukić, Selection of the most appropriate technology of reparatory hardfacing of working parts on universal construction machinery, SERBIA TRIB '11, Kragujevac, 2011, 11-13 Maj, pp. 240-249, ISBN 978-86-86663-74-0
  47. A. Ilić, L. Ivanović, D. Josifović, V. Lazić, The metodology aspects for monitoring the machine elements, components and systems, COMETA 2012, East Sarajevo – Jahorina, BiH, RS, 2012, 28-30. Novembar, pp. 593-599, ISBN 978-99938-655-5-1
  48. A. Ilić, L. Ivanović, D. Josifović, V. Lazić, High-strength steels, vehicle design, safety, reliability, environment friendly, Inovative automotive technology – IAT 2012, Novo mesto, Dolenjske Toplice, Slovenija, 2012, 12-13 April, pp. 51-58, ISBN 978-961-6536-61-5
  49. A. Ilić, L. Ivanović, D. Josifović, V. Lazić, Advantages of high strength steels applications in mechanical constructions, KOD 2012, Balatonfured, Hungary, 2012, 24-26 May, pp. 501-506, ISBN 978-86-7892-399-0
  50. A. Ilić, L. Ivanović, D. Josifović, V. Lazić, Design of the motor vehicles from the aspect of high strength steels applications, International congress motor vehicles & motors 2012, Kragujevac, Serbia, 2012, 3-5 October, pp. 372-379, ISBN -
  51. M. Đorđević, S. Aleksandrović, T. Vujinović, M. Stefanović, R. Nikolić, V. Lazić, Computer Controlled Experimental Device for Investigations of Tribological Influences in Sheet Metal Forming, 17th International PhD. students' seminar - SEMDOK 2012, Zilina-Terchova, 2012, 25-27 Januar, pp. 13-17, ISBN 978-80-554-0477-6
  52. M. Mutavdžić, V. Lazić, D. Milosavljević, S. Aleksandrović, R. Nikolić, R. Čukić, G. Bogdanović, Determination of the most proper tempering temperature in hard facing of the forging dies, 17th International PhD. students' seminar SEMDOK 2012, Zilina-Terchova, 2012, 25-27 Januar, pp. 46-49, ISBN 978-80-554-0477-6
  53. S. Rakić, V. Lazić, S. Aleksandrović, S. Mitrović, R. Nikolić, D. Milosavljević, R. Čukić, Reparatory and manufacturing hard-facing of working parts made of stainless steels in confectionary industry, Zavarivanje 2012 & IBR 2012, Divčibare, Srbija, 2012, 9-12 Oktobar, pp. 39-40 (rad saopšten u celini i objavljen na CD-u, 16 stranica), ISBN 978-86-82585-10-7
  54. V. Lazić, M. Jovanović, D. Đorđević, S. Aleksandrović, P. Marinković, B. Krstić, R. Čukić, Estimates of weldability and selection of the optimal technology for welding of high strength steel hardox 450, Zavarivanje 2012 & IBR 201, Divčibare, Srbija, 2012, 9-12 Oktobar, pp. 29-30 (rad saopšten u celini i objavljen na CD-u, 13 stranica), ISBN 978-86-82585-10-7
  55. A. Ilić, l Ivanović, D. Josifović, V. Lazić, R. R. Nikolić, Influence of stress concentratration on mechanical properties of high strength low alloyed steel grade, 18th International PhD. students' seminar - SEMDOK 2013, Zilina-Terchova, Slovak Republic (Slovakia), 2013, 30 Januar - 01 Februar, pp. 31-34, ISBN 978-80-554-0629-9
  56. A. Ilić, L. Ivanović, D. Josifović, V. Lazić, B. Rakić, Testing of elements and joints at mechanical constructions, 11th International conference on accomplishments in electrical and mechanical engineering and information technology DEMI 2013, Banja Luka, 2013, 30 May – 1th June, pp. 231-236, ISBN 978-99938-39-36-1
  57. D. Arsić, V. Lazić, R. R. Nikolić, S. Aleksandrović, P. Marinković, M. Đorđević, Application of high strength steel of the S690QL class for application to welded structures, 18th International PhD. students' seminar SEMDOK 2013, Zilina-Terchova, 2013, 30 January - 1 February, pp. 5-9, ISBN 978-80-554-0629-9
  58. D. Arsić, V. Lazić, R. R. Nikolić, S. Aleksandrović, P. Marinković, M. Đorđević, Application of high strength steel of the S690QL class for application to welded structures, 18th International PhD. students' seminar SEMDOK 2013, Zilina-Terchova, Slovak Republic (Slovakia), 2013, 30 Januar - 01 Februar, pp. 5-9, ISBN 978-80-554-0629-9
  59. L. Ivanović, D. Josifović, A. Ilić, V. Lazić, Ecological aspects of hihg strength low alloyed steels at mechanical constructions, 7th International Quality Conference, Kragujevac, 2013, May 24th, pp. 435-440, ISBN 978-86-866663-94-8
  60. M. Đorđević, S. Aleksandrović, V. Lazić, M. Stefanović, R. R. Nikolić, D. Arsić, Influence of lubricants on the multiphase ironing process, 18th International PhD. students' seminar - SEMDOK 2013, Zilina-Terchova, Slovak Republic (Slovakia), 2013, 30 Januar - 01 Februar, pp. 22-26, ISBN 978-80-554-0629-9
  61. M. Đorđević, S. Aleksandrović, V. Lazić, M. Stefanović, R. R. Nikolić, D. Arsić, Influence of lubricants on the multiphase ironing process, 18th International PhD. students' seminar SEMDOK 2013, Zilina-Terchova, 2013, 30 January - 1 February, pp. 22-26, ISBN 978-80-554-0629-9
  62. S. Aleksandrović, M. Stefanović, V. Lazić, D. Adamović, M. Đorđević, D. Arsić, Different ways of friction coefficient determination in stripe ironing test, 13th International conference on tribology, SERBIATRIB '2013, Kragujevac, 2013, 15 – 17 May, pp. 359-363, ISBN 978-86-86663-98-6
  63. S. Aleksandrović, T. Vujinović, M. Stefanović, V. Lazić, M. Đorđević, D. Milosavljević, Defining of pressure and drawbead height functions in sheet metal stripe tensile test over drawbead with variable parameters, 11th International conference on accomplishments in electrical and mechanical engineering and information technology DEMI 2013, Banja Luka, 2013, 30 May – 1th June, pp. 397-402, ISBN 978-99938-39-36-1
  64. V. Lazić, M. Mutavdžić, R. Nikolić, S. Aleksandrović, D. Milosavljević, B. Krstić, R. Čukić, Influence of various types of rock aggregates on selection of the working parts material in civil engineering, 13th International conference on tribology, SERBIATRIB '2013, Kragujevac, 2013, 15 – 17 May, pp. 275-280, ISBN 978-86-86663-98-6
  65. V. Lazić, R. Čukić, S. Aleksandrović, D. Milosavljević, R. Nikolić, B. Krstić, B. Nedeljković, Techno-economic justification for reparatory hard-facing of machine systems' working parts, 13th International conference on tribology, SERBIATRIB '2013, Kragujevac, 2013, 15 – 17 May, pp. 281-285, ISBN 978-86-86663-98-6
  66. V. Lazić, R. Nikolić, S. Aleksandrović, D. Arsić, M. Đorđević, M. Mutavdžić, Selection of the optimal reparation technology for working parts subjected to abrasive wear, 10th European conference of young researches and scientists, Transcom 2013, Žilina, 2013, 24-26 June, pp. 93-96, ISBN 978-80-554-0694-7
  67. V. Lazić, S. Aleksandrović, R. Nikolić, P. Marinković, D. Arsić, M. Đorđević, B. Krstić, Determination and analysis of causes for a catastrophic failure of a responsible machine part, DEGRADÁCIA KONŠTRUKČNÝCH MATERIÁLOV 2013, Žilina, 2013, 4 – 6 September, pp. 70-76, ISBN 978-80-554-0741-8
  68. D. Arsić, M. Đorđević, V. Lazić, S. Aleksandrović, R. Nikolić, Selecting the optimal welding technology of high strenght steel of the S690QL class, 19th International PhD. students' seminar SEMDOK 2014, Zilina-Terchova, 2014, 29 – 31 January, pp. 5-9, ISBN 978-80-554-0832-3
  69. D. Arsić, R. Nikolić, V. Lazić, B. Hadzima, S. Aleksandrović, M. Đorđević, Weldability estimates of some high strength steels, 42. International Conference Zvaranie 2014, Slovak Welding Society, Tatranská Lomnica, 2014, 12 - 14 November, pp. 11-21, ISBN 978-80-89296-17-0
  70. D. Arsić, R. Nikolić, V. Lazić, B. Hadžima, S. Aleksandrović, M. Đorđević:, Weldability estimates of some high strenght steels, 42. International Conference Welding 2014, Tatranská Lomnica, Slovakia, 2014, 12.-14.11.2014, pp. 11-21, ISBN 978-80-89296-17-0
  71. D. Arsić, V. Lazić, A. Ilić, L. Ivanović, S. Aleksandrović, M. Đorđević, Dependence of mechanical properties of the base metal and welded joint of the high strength steel S690QL on elevated temperatures, 8th International Conference „Heavy Machinery-HM 2014“, Zlatibor, 2014, 25-28 June, pp. C.55-59, ISBN 978-86-82631-74-3
  72. D. Arsić, V. Lazić, S. Aleksandrović, R. Nikolić, M. Đorđević, Application of high strength steels to responsible welded structures on motor vehicles, International Congress Motor Vehicles & Motors 2014, Kragujevac, Serbia, 2014, 9 – 10 October, pp. 453-458, ISBN 978-86-6335-010-6
  73. D. Arsić, V. Lazić, S. Aleksandrović, R. Nikolić, M. Đorđević, Application of high strength steels to responsible welded structures on motor vehicles, International Congress Motor Vehicles & Motors 2014, Kragujevac, 2014, 9 – 10 October, pp. 453-458, ISBN 978-86-6335-010-6
  74. D. Arsić, V. Lazić, S. Aleksandrović, R. Nikolić, P. Marinković, B. Krstić, M. Đorđević, Theoretical-experimental analysis of a responsible machine part fracture, 14th International Conference – New trends in FATIGUE and FRACTURE – NT2F14, Faculty of Mechanical Engineering in Belgrade, Belgrade, Serbia, 2014, 15-18 September, pp. -, ISBN -
  75. I. Krstić, V. Krstić, B. Krstić, V. Lazić, S. Trajković, Detrmination optimal effectiveness of electronic devices oreventive maintenance, International Congress Motor Vehicles & Motors 2014, Kragujevac, Serbia, 2014, 9 – 10 October, pp. 244-247, ISBN 978-86-6335-010-6
  76. S. Aleksandrović, T. Vujinović, M. Stefanović, V. Lazić, M. Đorđević, D. Arsić, Influence of variable drawbead height and variable contact pressure in Al alloy sheet strip drawing process, 5th International Conference on Manufacturing Engineering (ICMEN), Thessaloniki, Greece, 2014, 1 – 3 October, pp. 71-78, ISBN 978-960-98780-9-8
  77. V. Krstić, A. Todić, V. Lazić, I. Krstić, B. Krstić, Lj. Đorđević, Mathematical model for optimal time determination for intervals optimization of unused vehicle parts resoursces at their replacement, International Congress Motor Vehicles & Motors 2014, Kragujevac, Serbia, 2014, 9 – 10 October, pp. 241-243, ISBN 978-86-6335-010-6
  78. V. Lazić, D. Arsić, R. Nikolić, B. Hadzima, M. Mutavdžić, Experimental determination of mechanical characteristics of four types of stones and their influence on the construction machinery parts wear, 2nd International conference Binders and Materials, Brno, Czech Republic, 2014, 04. December, pp. -, ISBN -
  79. V. Lazić, R. Nikolić, B. Hadžima, S. Aleksandrović, D. Arsić, M. Đorđević, Experimental measurements of residual stresses in welding of steels operating at high temperatures, 42. International Conference Welding 2014, Tatranská Lomnica, Slovakia, 2014, 12.-14.11.2014, pp. 57-67, ISBN 978-80-89296-17-0
  80. D. Arsić, M. Đorđević, S. Aleksandrović, V. Lazić, R. Nikolić, B. Hadzima, Variation of the normal anisotropy coefficient of austenitic stainless steels at elevated temperatures, SEMDOK 2015, Žilina-Terchová, 2015, 28 – 30 January, pp. 5-8, ISBN 978-80-554-0832-3
  81. D. Arsić, V. Lazić, M. Mutavdžić, R. Nikolić, S. Aleksandrović, S. Mitrović, M. Đorđević, Experimental investigation of wear resistance of models hard faced with various filler metals, 14th International conference on tribology - SERBIATRIB '15, Belgrade, Serbia, 2015, 13 – 15 May, pp. 170-175, ISBN 978-86-7083-857-4
  82. D. Arsić, V. Lazić, R. Nikolić, B. Hadzima, J. Bujnak, Wear behavior of two different Cr based alloys for surfacing of steel parts, 40. AKTÍV PRACOVNÍKOV ODBORU OCEĽOVÝCH KONŠTRUKCIÍ – 40. Simpozijum o čeličnim konstrukcijama, Oščadnica – Veľká Rača, Slovakia, 2015, 21-23 October, pp. 15-22, ISBN 978-80-89619-01-6
  83. D. Arsić, V. Lazić, S. Aleksandrović, R. R. Nikolić, B. Hadzima, Optimization of the fractured mandrel axle-shaft reparation, International Conference on Engineering Sciences and Technologies -ESaT2015, Tatranska Štrba, Slovakia, 2015, 27- 29 May, pp. 9-12, ISBN 978-80-553-2042-7
  84. M. Djordjević, S. Aleksandrović, V. Lazić, D. Arsić, M. Stefanović, D. Milosavljević, Two-phase ironing process in conditions of ecologic and classic lubricants application, International conference on tribology - SERBIATRIB '15, Belgrade, Serbia, 2015, 13 – 15 May, pp. 407-413, ISBN 978-86-7083-857-4
  85. N. Ratković, D. Arsić, V. Lazić, R. Nikolić, A. Sedmak, Influence of friction welding parameters on mechanical properties and microstructure of the Al-Cu joint, th International Scientific and Expert Conference of the International TEAM Society - TEAM 2015, Belgrade, 2015, 15-16 October, pp. 359-363, ISBN 978-86-7083-877-2
  86. N. Ratković, V. Lazić, D. Arsić, R. Nikolić, B. Hadzima, Influence of the welding time on plastic deformation during the friction welding of the high-speed steel and steel for tempering, 43. International Conference Zvaranie 2015 - Organised by: Slovak Welding Society, Tatranská Lomnica, 2015, 11-13 November, pp. 84-92, ISBN 978-80-989296-18-7
  87. V. Lazić, D. Arsić, M. Djordjević, R. R. Nikolić, B. Hadzima, Joining of copper alloys andlow-carbon steels by electrical resistance spot brazing, International Conference on Engineering Sciences and Technologies - ESaT2015, Tatranska Štrba, Slovakia, 2015, 27- 29 May, pp. 137-140, ISBN 978-80-553-2042-7
  88. V. Lazić, D. Arsić, M. Mutavdžić, R. Nikolić, B. Hadzima, N. Ratković, Profitability analysis of reparation of the construction machinery damaged parts – how to save money, 43. International Conference Zvaranie 2015 - Organised by: Slovak Welding Society, Tatranská Lomnica, 2015, 11-13 November, pp. 15-27, ISBN 978-80-989296-18-7
  89. V. Lazić, D. Arsić, M. Mutavdžić, R. Nikolić, S. Aleksandrović, M. Đorđević, I. Samardžić, B. Hadzima, Technology for reparatory hard facing of snow plough blades, 8. International Scientific-Professional Conference „DESIGN, PRODUCTION AND SERVICE OF WELDED CONSTRUCTIONS AND PRODUCTS, SBZ 2015.“,, Slavonski Brod, Croatia, 2015, 21-23 October, pp. 135-142, ISBN 978-953-6048-80-9
  90. V. Lazić, D. Arsić, R. Nikolić, S. Aleksandrović, M. Đorđević, B. Hadzima, Optimization of welding of the truck's rear axle semi-housing, TRANSCOM 2015, University of Žilina, Žilina, Slovak Republic, 2015, 22-24 June, pp. 172-177, ISBN 978-80-554-1049-4
  91. M. Đorđević, S. Aleksandrović, A. Sedmak, R. Nikolić, V. Lazić, D. Arsić, Flat Die Sliding Model with Variable Contact Pressure in Deep Drawing Process, TEAM 2016, Trnava, Slovakia, 2016, 19th-21st October 2016, pp. 255-258, ISBN 978-80-8096-237-1
  92. V. Lazić, D. Arsić, R. R. Nikolić, S. Aleksandrović, M. Đorđević, B. Hadzima, Estimate of weldability and selection of optimal welding technology for the cover of a tube girder made of the C-Mn high strength steel, XLIV International conference ZVARANIE 2016, Tatranska Lomnica, Slovakia, 2016, 09-11 November, pp. 17-27, ISBN 978-80-89296-19-4
  93. M. Đorđević, S. Aleksandrović, R. Nikolić, V. Lazić, D. Arsić, B. Hadzima, Experimental apparatus for investigation of draw bead influence in deep drawing process, 7th International Conference Manufacturing Technology – PILSEN 2017, University of West Bohemia, Pilsen, Czech Republic, 2017, 7-8 February, pp. 54-60, ISBN 978-80-261-0636-4
  94. M. Đorđević, S. Aleksandrović, V. Lazić, R. Nikolić, D. Arsić, Influence of tribological conditions and continuously variable contact pressure on the process of the thin sheet sliding during the flat-die test, 6th International Conference on Manufacturing Engineering (ICMEN 2017), Thessaloniki, Greece, 2017, 5-6 October, pp. 173-18, ISBN 978-618-80878-4-2
  95. M. Đorđević, S. Aleksandrović, V. Lazić, R. Nikolić, D. Arsić, Influence of tribological conditions and continuously variable contact pressure on the process of the thin sheet sliding during the flat-die test, 6th International Conference on Manufacturing Engineering (ICMEN 2017), Aristotle University of Thessaloniki, Mechanical Engineering Department, Thessaloniki, Greece, 2017, 5-6 October, pp. 173-182, ISBN 978-618-80878-4-2
  96. S. Aleksandrović, S. Đačić, M. Đorđević, V. Lazić, D. Arsić, Influence of process parameters on the friction coefficient in AlMg3 alloy strip ironing drawing test, 15th International conference on tribology, 15th International conference on tribology, SERBIATRIB '17, Kragujevac, 2017, 17-19 May, pp. 351-356, ISBN 978-86-6335-041-0
  97. S. Aleksandrović, S. Đačić, M. Stefanović, M. Đorđević, V. Lazić, D. Arsić, Influence of process parameters on the friction coefficient in one and multi phase steel strip drawing ironing test, 13th International Conference on Accomplishments in Mechanical and Industrial Engineering – DEMI 2017, Banja Luka, Republic of Srpska, Bosnia and Herzegovina, 2017, 26-27 May, pp. 77-86, ISBN 978-99938-39-73-6
  98. V. Lazić, D. Arsić, R. Nikolić, M. Arsić, B. Hadzima, Procedure for selecting the low alloy-tempered steel for manufacturing the responsible highly loaded parts, 22nd International Seminar of PhD Students "SEMDOK 2017", Western Tatras-Zuberec, Slovakia, 2017, 25-27 January, pp. 72-76, ISBN 978-80-554-1303-7
  99. A. Ilić, L. Ivanović, D. Josifović, V. Lazić, J. Živković, Effect of welding on mechanical and microstructural characteristics of high-strenght low-alloy steel joints, The 10th International Conference Machine and Industrial Design in Mechanical Engineering - KOD 2018 June 6-8, 2018, , IOP Conf. Series: Materials Science and Engineering 393 (2018), Novi Sad, Serbia, 2018, June 6-8, pp. 1-10, ISBN 978-86-6022-059-4
  100. D. Arsić, V. Lazić, P. Palček, R. Nikolić, N. Ratković, Lj. Radović, N. Ilić, Selection of optimal hard-facing technology for reparation of the machine parts made of hot work tool steel, The 4th South – East European Welding Congress, "Safe Welded Construction by High Quality Welding", Belgrade, Serbia, 2018, 10-13 October, pp. 1-7, ISBN 978-86-82585-13-8
  101. D. Arsić, V. Lazić, R. R. Nikolić, S. Aleksandrović, M. Djordjević, Mechanical properties of hot-work tool steel at elevated temperatures, 23rd International Seminar of Ph.D. Students "SEMDOK 2018", Western Tatras-Zuberec, Slovakia, 2018, January 24-26, pp. 7-12, ISBN 978-80-554-1411-9
  102. S. Aleksandrović, M. Đorđević, V. Lazić, R. Nikolić, D. Arsić, A. Patarić, Model klizanja oboda lima između ravnih kontaktnih površina u procesu dubokog izvlačenja pri promenljivom kontaktnom pritisku, SPSM 2018, 37. Savetovanje Proizvodnog mašinstva Srbije, Kragujevac, 2018, 25-26. Oktobar, pp. 28-36, ISBN 978-86-6335-057-1
  103. V. Lazić, D. Arsić, M. Mutavdžic, R. Nikolić, J. Meško, Lj.Radović, N. Ilić, Review of the hard-facing technology application forreparation of the given parts in various branches of industry, XV International Conference "Multidisciplinary Aspectsof Production Engineering – MAPE 2018, Zawiercie, Poland, 2018, 05-08 September, pp. 279-285, ISBN 978-83-65265-25-8
  104. V. Lazić, D. Arsić, M. Rakičević, S. Aleksandrović, M. Đorđević, P. Marinković, N. Ratković, Uticaj zavarenog spoja na balistička svojstva pancirnog čelika Armox 500T, SPSM 2018, 37. Savetovanje Proizvodnog mašinstva Srbije, Kragujevac, 2018, 25-26. Oktobar, pp. 173-177, ISBN 978-86-6335-057-1
  105. V. Lazić, D. Arsić, R. Nikolić, Lj. Radović, N. Ilić, B. Hadzima, Determination of the cooling time in carbon steels welding - experiments vs analytical/empirical expressions, ESaT 2018, 3rd International Conference on Engineering Sciences and Technologies, Hotel SOREA Hutník I., Tatranské Matliare, Slovak Republic, 2018, 12th - 14th September 2018, pp. 1-5, ISBN 978-80-553-2982-6
  106. D. Arsić, V. Lazić, D. Džunić, S. Aleksandrović, M. Đorđević, M. Uhričik, A. Arsić, Wear resistance under dry conditions of different filler metals used for hard facing, 16th International Conference on Tribology – SERBIATRIB 19, SERBIATRIB 19, Kragujevac, Serbia, 2019, 15-17 May, pp. 423-428, ISBN 2620-2832
  107. M. Đorđević, S. Aleksandrović, V. Lazić, D. Arsić, A. Todić, A. Patarić, The possibilities for application of numerical simulation in the ironing process of thin sheets, 16th International Conference on Tribology – SERBIATRIB 19, Kragujevac, Serbia, 2019, 15-17 May, pp. 405-412, ISBN 2620-2832
  108. S. Aleksandrović, S. Đačić, M. Đorđević, V. Lazić, D. Arsić, Determination of corrected parameters in strip ironing process with double side thinning, 16th International Conference on Tribology – SERBIATRIB 19, Kragujevac, Serbia, 2019, 15-17 May, pp. 440-448, ISBN 2620-2832
  109. D. Arsić, M. Mutavdžić, R. Nikolić, V. Lazić, B. Hadzima, Physical properties of selected rock materials, 25th International Seminar of PhD Students SEMDOK 2020, Zuberec, Slovakia, 2020, 29-31 January, pp. 9-14, ISBN 978-80-554-1463-4
  110. S. Djacic, S. Aleksandrovic, D. Arsic, M. Delic, V. Lazic, Ironing process in conditions of constant and variable lateral force, 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021, Banja Luka, Republika Srpska, 2021, 28-29 May, pp. 45-50, ISBN 978-99938-39-92-7
  111. V. Lazić, D. Arsić, S. Aleksandrović, M. Đorđević, M. Delić, Application of welding for the production of ballistic protective structures, 10th International Scientific Conference - IRMES 2022 - Research and Development of Mechanical Elements and Systems, Belgrade, 2022, 26 May, pp. 189-192, ISBN 978‐86‐6060‐119‐5
  112. D., Josifović, M., Jovanović, B., Srećković, D., Adamović, V., Lazić, Surfacing of Forging Dies for Working at Elevated Temperatures, MATERIALS CONGRESS '98, Royal Agricultural College Cirencester, UK, 1998, April, pp. 75.
  113. D., Josifović, V., Lazić, M., Jovanović, B., Nedić, D., Adamović, Evaluation of various lubricants quality in tribological investigations of the hard faced forging dies, Wom 2001-1, Kanada, 2001
  114. V., Lazić, V., Marušić, S., Aleksandrović, Prevention possibility research of brittleness of stress relieving of re-welded steels for hot work, 9th International Symosium of Croatian Metallurgical Society "Materials and Metallurgy", Section - A Materials, Croatia, Šibenik, 2010, 20-24 Juni, pp. 227, ISBN -
  115. D. Nikolić, R. Nikolić, B. Krstić, V. Lazić, I. Nikolić, I. Krstić , N. Janjić, Optimization of Technical Diagnostics Procedures for Hydroelectric Power Plants, 23rd Czech and Slovak International Conference - STEEL STRUCTURES AND BRIDGES 2012, Podbanske, Slovakia, 2012, 26-28. 09., pp. 70, ISBN 978-80-89619-00-9
  116. R. Nikolić, Krstić, B., V. Lazić, I. Nikolić, I. Krstić, V. Krstić, Determination and Analysis of influence of the Hydrodynamic, Kinematic and Geometric Parameters of the Motor Vehicles Hydrodynamic Clutch Characteristics, 23rd Czech and Slovak International Conference - STEEL STRUCTURES AND BRIDGES 2012, Podbanske, Slovakia, 2012, 26-28. 09., pp. 69, ISBN 978-80-89619-00-9
  117. V. Lazić, S. Aleksandrović, R. Nikolić, R. Prokić-Cvetković, O. Popović, D. Milosavljević,, Estimates of weldability and selection of the optimal procedure and technology for welding of high strength steels, 23rd Czech and Slovak International Conference - STEEL STRUCTURES AND BRIDGES 2012, Podbanske, Slovakia, 2012, 26-28. 09., pp. 68, ISBN 978-80-89619-00-9
  118. D. Arsić, V. Lazić, R. Nikolić, S. Aleksandrović, M. Đorđević, Influence of the sliding speed on the wear resistance of parts hard faced by the high-alloyed filler metal which operate in conditions without lubrication, 21st International PhD. students' seminar SEMDOK 2016, Žilina-Terchová, Slovakia, 2016, 2016, 27-29 January, pp. 8, ISBN 978-80-554-1175-0
  119. M. Đorđević, S. Aleksandrović, R. Nikolić, V. Lazić, D. Arsić, Influence of the variable contact pressure on the tensile force in the process of strip sliding in the flat die in ironing, 21st International PhD. students' seminar SEMDOK 2016, Žilina-Terchová, Slovakia,, 2016, 27-29 January, pp. 10, ISBN 978-80-554-1175-0
  120. N. Ratković, D. Arsić, V. Lazić, R. Nikolić, B. Hadzima, Influence of the contact and compacting pressures on the quality of the friction welded joint, 21st International PhD. students' seminar SEMDOK 2016, Žilina-Terchová, Slovakia, 2016, 27-29 January, pp. 9, ISBN 978-80-554-1175-0
  121. A. Ilić, L. Ivanović, D. Josifović, V. Lazić, J. Živković, Effect of welding on mechanical and microstructural characteristics of high-strenght low-alloy steel joints, The 10th International Conference on Machine and Industrial Design in Mechanical Engineering, Novi Sad, Serbia, 2018, June 6-8 2018, pp. 48-49, ISBN 978-86-6022-059-4
  122. D. Arsić, V. Lazić, A. Sedmak, Z. Burzić, B. Međo, R. Nikolić, Experimental-numerical analysis of appearance and growth of a crack in hard.facede layers of the hot-work high-strength tool steels, 22nd Eoropean Conference on Fracture – ECF22, Loading and environment effects on structural integrity, Belgrade, Serbia, 2018, 26-31 August, pp. 82, ISBN 978-86-900686-0-9
  123. V. Lazić, D. Arsić, A. Sedmak, R. Nikolić, M. Opačić, Accuracy assessment of formulas for cooling time (t8/5) calculation during the welding of carbon steels, 2nd International Conference Structural Reliability & Modelling in Mechanics 2018, Ostrava, Czech Republic, 2018, 24-25 May, pp. 37-38, ISBN 978-80-248-4174-8
  124. D. Arsić, R. Nikolić, V. Lazić, A. Arsić, Z. Savić, S. Djačić, B. Hadzima, Analysis of the cause of the girth gear tooth fracture occurrence at the bucket wheel excavator, 13th European Conference TRANSCOM 2019, High Tatras, Slovakia, 2019, 29-31 May, pp. 48, ISBN 978-80-554-1565-9
  125. D. Arsić, R. Nikolić, V. Lazić, A. Arsić, Z. Savić, S. Djačić, B. Hadzima, Reparatory surface welding of the fractured tooth of the bucket‐wheel excavator girth gear, 9th International Scientific Conference - IRMES 2019 - Research and Development of Mechanical Elements and Systems, Kragujevac, 2019, 5-7 September, pp. 184-185, ISBN 978‐86‐6335‐061‐8