FACULTY OF ENGINEERING KRAGUJEVAC
UNIVERSITY KRAGUJEVAC
CURRICULUM VITAE

GENERAL INFORMATION
First and last name
Year and place of birth
PositionAssociate professor
E-mail
Education-scientific / education–art field
University, faculty, organizational unit
Field and closer specialty

TECHNICAL BIOGRAPHY – POSITIONS
YearInstitutionPosition
1990Research & teaching аssistant prentice
1996Research & teaching assistant
2000Research & teaching assistant
2004Research & teaching assistant
2006Research & teaching assistant
2009Assistant professor
2014Associate professor
2018Faculty of Engineering University of KragujevacFull professor

PROFESSIONAL BIOGRAPHY - IMPROVEMENTS
YearInstitutionDuration
2016
2018University of Montenegro, Faculty of Mechanical Engineering, Montenegro30 days
2019University of Zenica, Faculty of Mechanical Engineering,B&H30 days

AWARDS AND RECOGNITIONS
YearName of award/recognition
2002

Other

RESULTS OF SCIENTIFIC AND RESEARCH WORK
Papers published in international scientific journals
  1. M. Bojic, D. Cvetkovic, V. Marjanovic, M. Blagojevic, Z. Djordjevic, PERFORMANCES OF LOW TEMPERATURE RADIANT HEATING SYSTEMS, Energy and Buildings, Vol.61, No.1, pp. 233-238, ISSN 0378-7788, 2013
  2. Sasa Jovanovic, Slobodan Savic, Milorad Bojic, Zorica Djordjevic, Danijela Nikolic, The impact of the mean daily air temperature change on electricity consumption, Energy, Vol.88, No.-, pp. 604-609, ISSN 0360-5442, Doi 10.1016/j.energy.2015.06.001, 2015
  3. Blagojevic Mirko, Marjanovic Nenad, Djordjevic Zorica, Stojanovic Blaza, Disic Aleksandar, A New Design of a Two-Stage Cycloidal Speed Reducer, Journal of Mechanical Design, Vol.133, No.8, pp. 85001, ISSN 1050-0472, Doi 10.1115/1.4004540, 2011
  4. Dobrivoje Ćatić, Branislav Jeremić, Zorica Djordjević,Nenad Miloradović, Criticality Analysis of the Elements of the Light Commercial Vehicle Steering Tie-Rod Joint, Strojniški vestnik - Journal of Mechanical Engineering, Vol.57, No.6, pp. 495-502, ISSN 0039-2480, Doi 10.5545/sv-jme.2010.077, 2011
  5. V Stefanović, M Bojić, S Pavlović, N Apostolović, I Nikolić, Z Djordjević, D Ćatić, A prototype receiver for medium temperature conversion of solar radiation to heat, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol.225, No.8, pp. 1132-1142, ISSN 0957-6509, Doi 10.1177/0957650911419442, 2011
  6. Blagojevic M., Kocic M., Marjanovic N., Stojanovic B., Djordjevic Z., Ivanovic L., Marjanovic V., Influence of the Friction on the Cycloidal Speed Reducer Efficiency, Journal of the Balkan Tribological Association, Vol.18, No.2, pp. 217-227, ISSN 1310-4772, 2012
  7. Djordjević Z., Jovanović S., THE INFLUENCE OF MATERIAL TYPES ON STATIC AND DYNAMIC CHARACTERISTICS OF COMPOSITE SHAFTS, METALURGIA INTERNATIONAL, Vol.18, No.Special Issue no. 8, pp. 122-128, ISSN 1582-22-14, 2013
  8. Nikolic D., Djordjevic Z., Bojic M., Radulovic J., Skerlic J., Optimization of photovoltaics panels area at Serbian zero-net energy building, Journal of Renewable and Sustainable Energy, Vol.5, No.4, pp. 208-226, ISSN 1941-7012, 2013
  9. M. Blagojevic, N. Marjanovic, Z. Djordjevic, B. Stojanovic, V. Marjanovic, R. Vujanac, A. Disic, NUMERICAL AND EXPERIMENTAL ANALYSIS OF THE CYCLOID DISC STRESS STATE, Technical Gazette, Vol.21, No.2, pp. 377-382, ISSN 1330-3651, 2014
  10. Zorica Djordjevic, Mirko Blagojevic, Vesna Marjanovic, Sasa Jovanovic, THE INFLUENCE OF MATERIAL TYPES ON TWIST ANGLES AND TORSION STABILITY OF A COMPOSITE SHAFT, Technical Gazette, Vol.21, No.5, pp. 917-923, ISSN 1330-3651, 2014
  11. Jovanovic Sasa, Savic Slobodan, Jovicic Nebojsa, Boskovic Goran, Djordjevic Zorica, Using multi-criteria decision making for selection of the optimal strategy for municipal solid waste management, WASTE MANAGEMENT & RESEARCH, Vol.34, No.9, pp. 884-895, ISSN 0734-242, Doi 10.1177/0734242X16654753, 2016
  12. Zorica Djordjević, Mirko Blagojević, Snežana Vulović, Danijela Nikolić, Saša Jovanović, An Investigation Into Hybrid Aluminium/Composite Cardan Shaft, Transaction of FAMENA, Vol.41, No.2, pp. 45-54, ISSN 1333-1124, Doi 10.21278/TOF.41204, 2017
Papers presented at international conferences
  1. Đorđević Z., Jovanović S., Nikolić-Stanojević V., Static and dynamic analysis of hybrid aluminum/composite shaft, 2 International Congress of Serbian Society of Mechanics (IConSSM 2009), Palić (Subotica), 2009
  2. Jovanovic S., Djordjevic Z., Savic S., The influence of stress on fatigue life of the conical springs, 9 International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2009, Banja Luka, 2009, pp. 143-148
  3. Ђорђевић З., Николић В., Благојевић М., Application of hybrid aluminium/composite materials for manufacture of transmission shafts, International Congress Motor Vehicles&Motors2010, Kragujevac, 2010, 07.10., pp. 335-341, ISBN 978-86-86663-57-3
  4. Blagojevic M., Marjanovic N., Djordjevic Z., Stojanovic B, Stress and Strain State of Single– Stage Cycloidal Speed Reducer, THE 7TH INTERNATIONAL CONFERENCE RESEARCH AND DEVELOPMENT OF MECHANICAL ELEMENTS, Zlatibor, Srbija, 2011, 27. i 28. april, pp. 553-559, ISBN 978-86-6055-012-7
  5. Kostic N., Djordjevic Z., Blagojevic M., Marjanovic N, Influence kind of the Material and Angle of Fibres Orientation on Stress and Strain Analysis of Composite Shaft, THE 7TH INTERNATIONAL CONFERENCE RESEARCH AND DEVELOPMENT OF MECHANICAL ELEMENTS, Zlatibor, Srbija, 2011, 27. i 28. april, pp. 321-327, ISBN 978-86-6055-012-7
  6. M.Bojić, G. Jovanović, V. Marjanović, S. Jovanović, I. Nikolić, Z. Djordjević, Impact of Large-Scale Implementation of Photovoltaic Devices to CO2 Emissions, 3rd IEEE International Symposium on Exploitation of Renewable Energy Sources, Subotica, Serbia, 2011, March 11-12, pp. 59-65, ISBN 978-1-4577-0095-8
  7. Marjanovic N., Isailovic B., Stojanovic B., Djordjevic Z, Integration of Topology and Shape Optimization into the Process of the Design of Mechanical Structures Elements, THE 7TH INTERNATIONAL CONFERENCE RESEARCH AND DEVELOPMENT OF MECHANICAL ELEMENTS, Zlatibor, Srbija, 2011, 27., 28. april, pp. 49-57, ISBN 978-86-6055-012-7
  8. Mirko Blagojević, Nenad Marjanović, Blaža Stojanović, Zorica Đorđević, Milorad Kočić, INFLUENCE OF FRICTION ON THE FORCE DISTRIBUTION AT CYCLOIDAL SPEED REDUCER, SERBIATRIB ‘11, 12th International Conference on Tribology, Kragujevac, Serbia, 2011, 11 – 13 May
  9. M. Bojic, D. Adamovic, J. Radulović, M. Miletić, I. Miletić, V. Marjanović, Z. Djordjević, AWARENESS ON ENERGY SAVINGS IN LOW-RISE HOUSES IN SERBIA, 43rd International Congress on Heating, Refrigerating and Air- Conditioning, Belgrade, 2012, 5–7.12.
  10. Mirko Blagojević, Zorica Đorđević, Vesna Marjanović, Nenad Marjanović, Blaža Stojanović, Rodoljub Vujanac, STRESS AND STRAIN STATE OF CYCLOID DISC, 1st INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa 2012, East Sarajevo – Jahorina, B&H, RS, 2012, 28th – 30th November, pp. 367-374, ISBN 978-99938-655-5-1
  11. N. Kostic, M. Blagojevic, V. Marjanovic, Z. Djordjevic, N. Marjanovic, Influence of cycloidal gear profile correction to the number of contacts between the elements of a cycloidal speed reducer, 1st INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa 2012, East Sarajevo - Jahorina, B&H, RS, 2012, 28th – 30th November, pp. 339-346, ISBN 978-99938-655-5-1
  12. Nenad Kostic, Zorica Djordjevic, Mirko Blagojevic, Sasa Jovanovic, STATIC ANALISYS OF HYBRID METAL - COMPOSITE SHAFTS, International Congress Motor Vehicles & Motors 2012, Kragujevac, 2012, October 3rd - 5th, pp. 340-346, ISBN 978-86-86663-91-7
  13. Saša Jovanović , Zorica Djordjević , Milorad Bojić , Slobodan Savić , Biljana Stepanović, WEATHER CONDITIONS IMPACT ON ELECTRICITY CONSUMPTION, 1st INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa 2012, East Sarajevo – Jahorina, B&H, RS, 2012, 28th – 30th November, pp. 409-414, ISBN 978-99938-655-5-1
  14. Z. Djordjević, S. Jovanović , M. Bojić , M. Miletić, M. Blagojević, BRISE-SOLEIL USAGE IN ORDER TO REDUCE ENERGY CONSUMPTION IN BUILDINGS, 43rd International Congress on Heating, Refrigerating and Air- Conditioning, Belgrade, 2012, 5–7. 12., pp. 211-218
  15. Zorica Djordjević, Mirko Blagojević, Saša Jovanović, Vesna Marjanović, Nenad Kostić, MATERIAL TYPE INFLUENCE ON STATIC AND DYNAMIC CHARACTERISTICS OF COMPOSITE SHAFTS, 1st INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa 2012, East Sarajevo - Jahorina, 2012, 28th – 30th November, pp. 133-140, ISBN 978-99938-655-5-1
  16. Dejan B. Momčilović, Ivana Atanasovska, Ljubica Milović, Zorica Đorđević, ASSESSMENT OF THE FATIGUE LIFE REDUCTION OF MACHINE PARTS WITH CORROSION PIT, 4th International Congress of Serbian Society of Mechanics, Vrnjačka Banja, 2013, 4-7th June, pp. 639-644, ISBN 978-86-909973-5-0
  17. Djordjevic Zorica, Jovanovic Sasa, Bojic Milorad, Cvetkovic Dragan, Adamovic Dragan, THE INFLUENCE OF ELECTRICAL APPLIANCES ON SPENDING ENERGY IN HOUSEHOLDS, 11 International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013, Banja Luka, 2013, 30 May - 1 June, pp. 779-784, ISBN 978-99938-39-46-0
  18. Dobrivoje Catic, Milorad Bojic, Jasna Glisovic, Zorica Djordjevic, Nada Ratkovic, FAULT TREE ANALYSIS OF SOLAR CONCENTRATORS, 7. International Quality Conference, Kragujevac, 2013, 24. 05., pp. 629-638, ISBN 978 - 86 - 86663 - 94 - 8
  19. Marko Miletić, Saša Jovanović, Zorica Đorđević, Ivan Miletić, Milorad Bojić, OPTIMISATION OF ZERO-NET ENERGY HOUSE ORIENTATION FROM SOLAR ENERGY ABSORPTION ASPECT, 11 International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013, Banja Luka, 2013, 30 May - 1 June, pp. 743-748, ISBN 978-99938-39-46-0
  20. Milos Matejic, Mirko Blagojevic, Zorica Djordjevic, Nenad Marjanovic, Nenad Petrovic, COMPARATIVE ANALYSIS OF DIFERENT TYPE REDUCERS FOR WINCH DRUM DRIVING UNIT, 7. International Quality Conference, Kragujecac, 2013, 24. 05., pp. 255-262, ISBN 978 - 86 - 86663 - 94 - 8
  21. N. Petrovic, M. Blagojevic, Z. Djordjevic, V. Marjanovic, Parametric drawing of a cyclo drive relative to input shaft angle, 35th International conference on production engineering, Kraljevo - Kopaonik, 2013, 25 - 28 september, pp. 259-262, ISBN 978-86-82631-69-9
  22. Nenad Kostic, Mirko Blagojevic, Vesna Marjanovic, Zorica Djordjevic, Milorad Bojic, DETERMINATION OF SOLAR ANGLES FOR SUITABLE POSITIONING OF SOLAR SYSTEMS FOR PARTICULAR TIMES OF THE YEAR, 7. International Quality Conference, Kragujevac, 2013, 24. 05., pp. 249-254, ISBN 978 - 86 - 86663 - 94 - 8
  23. Sasa Jovanovic, Marko Miletic, Zorica Djordjevic, Ivan Miletic, Milorad Bojic, OPTIMISATION OF ZERO-NET ENERGY HOUSE ORIENTATION IN CITIES OF DIFFERENT LATITUDE, 7. International Quality Conference, Kragujevac, 2013, 24. 05., pp. 363-368, ISBN 978 - 86 - 86663 - 94 - 8
  24. Zorica Djordjevic, Mirko Blagojevic, Nenad Kostic, Sasa Jovanovic, Vesna Marjanovic, ADVANTAGES OF APPLICATION COMPOSITE MATERIALS FOR PRODUCTION CARDAN SHAFTS, 11 International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013, Banja Luka, 2013, 30 May - 1 June, pp. 71-76, ISBN 978-99938-39-46-0
  25. Zorica Djordjevic, Sasa Jovanovic, Milorad Bojic, Dragan Adamovic, Milos Matejic, THE INFLUENCE OF TV AND VIDEO APPLIANCES AND INFORMATION TECHNOLOGY EQUIPMENT ON ENERGY CONSUMPTION IN HOUSEHOLDS, 7. International Quality Conference, Kragujevac, 2013, 24. 05., pp. 351-356, ISBN 978 - 86 - 86663 - 94 - 8
  26. Zorica Đorđević, Ivana Atanasovska, Mirko Blagojević, Dejan Momčilović, Marko Miletić, THE NUMERICAL ANALYSIS OF STRAIN AND STRESS STATE OF COMPOSITE SHAFT, 4th International Congress of Serbian Society of Mechanics, Vrnjačka Banja, 2013, 4-7th June, pp. 329-334, ISBN 978-86-909973-5-0
  27. Danijela Nikolic, Milorad Bojic, Jasmina Skerlic, Zorica Djordjevic, Dragan Cvetkovic, OPTIMIZATION OF ENERGY CONSUMPTION OF SERBIAN POSITIVE-NET ENERGY BUILDING, 8th International Quality Conference, Kragujevac, 2014, 23rd May, pp. 887-892, ISBN 978-86-6335-004-5
  28. Mirko Blagojević, Zorica Đorđević, Miloš Matejić, Nenad Kostić, Nenad Petrović, DYNAMIC MODEL OF CYCLOIDAL SPEED REDUCER, International Congress Motor Vehicles & Motors 2014, Kragujevac, 2014, 09-10. 10., pp. 421-426, ISBN 978-86-6335-010-6
  29. Sasa Jovanovic, Danijela Nikolic, Milorad Bojic, Marko Miletic, Zorica Djordjevic, OPTIMIZATION OF ZERO-NET ENERGY BUILDINGS WITH DIFFERENT LATITUDE AND DIFFERENT THERMAL INSULATION THICKNESS, 8th International Quality Conference, Kragujevac, 2014, 23rd May, pp. 495-500, ISBN 978-86-6335-004-5
  30. Sasa Jovanovic, Goran Boskovic, Nebojsa Jovicic, Zorica Djordjevic, Slobodan Savic, MULTICRITERIA ANALYSIS OF OPTIMAL SOLID WASTE MANAGEMENT SYSTEM-CASE STUDY OF KRAGUJEVAC (SERBIA), 8th International Quality Conference, Kragujevac, 2014, 23rd May, pp. 461-468, ISBN 978-86-6335-004-5
  31. Sasa Jovanovic, Slobodan Savic, Milorad Bojic, Zorica Djordjevic, Danijela Nikolic, THE IMPACT OF THE MEAN DAILY AIR TEMPERATURE CHANGE ON ELECTRICITY CONSUMPTION, 8th International Quality Conference, Kragujevac, 2014, 23th May, pp. 775-782, ISBN 978-86-6335-004-5
  32. Zorica Djordjević ,Miloš Zuvić , Mirko Blagojević , Saša Jovanović , Miloš Matejić, ANALYSIS OF THE VEHICLE DYNAMIC STABILITY, 2nd INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa2014, East Sarajevo – Jahorina, B&H, RS, 2014, 02 – 05 December, pp. 437-442, ISBN 978-99976-623-1-6
  33. Zorica Djordjevic, Danijela Nikolic, Milorad Bojic, Marko Miletic, Sasa Jovanovic, OPTIMIZATION OF BRISE-SOLEIL ZERO-NET ENERGY BUILDINGS WITH DIFFERENT THERMAL INSULATION THICKNESS, 8th International Quality Conference, Kragujevac, 2014, 23rd May, pp. 557-562, ISBN 978-86-6335-004-5
  34. Zorica Đorđević, Jovana Rašić, Mirko Blagojević, Miloš Matejić, Nenad Petrović, TRUCK SUPPORTIVE CHASSIS STRUCTURAL STATIC ANALYSIS, International Congress Motor Vehicles &Motors 2014, Kragujevac, 2014, 09-10. 10., pp. 405-410, ISBN 978-86-6335-010-6
  35. Sasa Jovanovic, Nebojsa Jovicic, Goran Boskovic, Zorica Djordjevic, Slobodan Savic, INFLUENCE OF MORPHOLOGICAL COMPOSITION OF WASTE TO ENVIRONMENTAL PERFORMANCE OF MUNICIPAL SOLID WASTE MANAGEMENT TECHNOLOGIES, 9. International Quality Conference, Kragujevac, 2015, 05. 06., pp. 171-175, ISBN 978 - 86 - 6335 - 015 - 1
  36. Zorica Djordjevic, Ivan Krstic, Mirko Blagojevic, Saša Jovanovic, Miloš Matejic, Analysis of Stress-Strain State of the Plate Spring, THE 3rd INTERNATIONAL CONFERENCE MECHANICAL ENGINEERING IN XXI CENTURY, Niš, 2015, September 17 - 18, pp. 149-152, ISBN 978-86-6055-072-1
  37. Marko Denić, Zorica Đorđević, Vesna Marjanović, Nenad Petrović, Nenad Kostić, COMPARATIVE COMPOSITE AND CONVENTIONAL DRIVE SHAFT ANALYSIS, International Congress Motor Vehicles & Motors 2016, Kragujevac, 2016, 6th-7th October, pp. 167-172, ISBN 978-86-6335-037-3
  38. Nevena Stevanović, Zorica Djordjević , Saša Jovanović, Olivera Gavrilović, THE ANALYSIS OF STRESS-STRAIN STATE OF GEARS MADE FROM COMPOSITE MATERIALS, 3rd INTERNATIONAL SCIENTIFIC CONFERENCE COMETa2016 „Conference on Mechanical Engineering Technologies and Applications“, East Sarajevo-Jahorina, RS, B&H, 2016, 7th-9th December, pp. 361-366, ISBN 978-99976-623-7-8
  39. Saša Jovanović, Nebojša Jovičić, Goran Bošković, Slobodan Savić, Zorica Đorđević, SELECTION OF THE OPTIMAL SYSTEM FOR MUNICIPAL SOLID WASTE MANAGEMENT BY INTEGRATED APPLICATION OF LCA AND MCDM METHODS, 1st International conference on Quality of Life, Kragujevac, 2016, 09th-10th June, pp. 297-303, ISBN 978 - 86 - 6335 - 033 - 5
  40. Zorica Djordjević, Saša Jovanović, Olivera Gavrilović, Dobrivoje Ćatić, Slobodan Savić, BIOCOMPOSITES – ECOLOGICALLY ACCEPTABLE MATERIALS, 1stInternational conference on Quality of Life, Kragujevac, 2016, 09th-10th June, pp. 267-270, ISBN 978 - 86 - 6335 - 033 - 5
  41. Delić M., Djordjević Z., Matejić M., Jovanović S., CALCULATION OF STRESS STATE OF GEAR MADE OF COMPOSITE MATERIALS, 13 International Conference on Accomplishments th in Mechanical and Industrial Engineering, Banja Luka, 2017, 26 - 27 May, pp. 509-514, ISBN 978-99938-39-72-9
  42. Djordjević Z., Jovanović S., Stanojević M., Blagojević M., Veličković S., OPTIMIZATION OF FIBER ORIENTATION ANGLE OF A HYBRID Al / COMPOSITE CARDAN SHAFT, 13 International Conference on Accomplishments th in Mechanical and Industrial Engineering, Banja Luka, 2017, 26 - 27 May, pp. 489-494, ISBN 978-99938-39-72-9
  43. Jasmina Blagojević, Zorica Djordjević, Sandra Veličković, APPLICATION OF TAGUCHI METHODS WITH OPTIMIZATION OF FIBRE ORIENTATION ANGLE OF LAMINATED AL/ARAMID/EPOXY COMPOSITE CARDAN SHAFT, 8th INTERNATIONAL SCIENTIFIC CONFERENCE ”Research and development of mechanical elements and systems“ IRMES 2017 “Machine elements and systems in energy sector Development of power production systems”, Trebinje, Republika Srpska, Bosnia and Herzegovina, 2017, 7th - 9th September, pp. 265-270, ISBN 978-9940-527-53-2
  44. Zorica Djordjević, Saša Jovanović, Sandra Veličković, Djurdje Jović, Jovana Milićević, INFLUENCE OF APPLICATION OF NEW MATERIAL IN AUTOMOTIVE INDUSTRY ON IMPROVING QUALITY OF LIFE, 2st International conference on Quality of Life, Kragujevac, 2017, 08th-10th June, pp. 329-332, ISBN 978-86-6335-043-4
  45. Kostic Sonja, Djordjevic Zorica, Djordjevic Milosav, THE INFLUENCE OF THE INTERNAL RADIAL CLEARANCE ON THE LOAD DISTRIBUTION ON THE ROLLER BODY OF A SINGLE RADIAL BALL BEARING, 7th International Congress Motor Vehicles & Motors 2018, Kragujevac, 2018, 4th - 5th October, pp. 341-347, ISBN 978-86-6335-055-7
  46. Milica Borisavljevic, Zorica Djordjevic, Sonja Kostic, Dragomir Miljanic, MODELING AND STRUCTURAL ANALYSIS OF CYLINDRICAL COIL SPRING, 4th INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa2018, East Sarajevo - Jahorina 2018, East Sarajevo - Jahorina 2018, 2018, 27th – 30th November, pp. 428-433, ISBN 978-99976-719-4-3
  47. Saša Jovanović, Slobodan Savić, Zorica Djordjević, Danijela Nikolić, Goran Bošković, DEFINING AN OPTIMAL CITY AND REGIONAL MUNICIPAL SOLID WASTE MANAGEMENT SYSTEM BY USING MULTI-CRITERIA DECISION MAKING METHOD, 4th INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa2018, East Sarajevo - Jahorina 2018., East Sarajevo - Jahorina 2018., 2018, 27th – 30th November, pp. 601-610, ISBN 978-99976-719-4-3
  48. Veličković S., Djordjević Z., Stojanović B., Blagojević J., Miladinović S., Influence of angles of fiber orientation on improving the characteristics of composite cardan shaft using factorial experiment, The 10th International Symposium Machine and Industrial Design in Mechanical Engineering (KOD 2018), Novi Sad, 2018, 6th-8th June, pp. IOP Conf. Series: Materials Science and Engineering 393 (2018) 012086, ISBN doi: 10.1088/1757-899X/393/1/012086
  49. Milicevic Jovana, Djordjevic Zorica, Kostic Sonja, Jovanovic Sasa, MODELING AND STRUCTURAL ANALYSIS OF SCOOTER’S PARTS MADE OF COMPOSITE MATERIALS, 14th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2019., Banja Luka, 2019, 24-25 may, pp. 361-366, ISBN 978-99938-39-85-9
  50. Sandra Veličković, Blaža Stojanović, Zorica Djordjević, Slavica Miladinović, Jasmina Blagojević, Effect of reinforcement on mechanical characteristics of A356 alloy nanocomposites, 9th International Scientific Conference Research and Development of Mechanical Elements and Systems, Kragujevac, 2019, 5-7 September, pp. IOP Conf. Series: Materials Science and Engineering 659 (2019) 012039 IOP Publishing doi:10.1088/1757-899X/659/1/012039
  51. Zorica Djordjevic, Sasa Jovanovic, Sonja Kostic, Mirko Blagojevic, Danijela Nikolic1, Application of the multi-criteria decision making in the selection of materials of composite shaft, 9th International Scientific Conference Research and Development of Mechanical Elements and Systems, Kragujevac, 2019, 5-7 September, pp. IOP Conf. Series: Materials Science and Engineering 659 (2019) 012024 IOP Publishing doi:10.1088/1757-899X/659/1/012024
  52. Kostić S., Djordjevic Z., Rajkovic D., Djordjević M., EXPERIMENTAL METHOD FOR CALCULATION OF RADIAL STIFFNESS FOR SINGLE-ROW BALL BEARING, International Congress Motor Vehicles & Motors 2020, Kragujevac, 2020, 8th - 9th October, pp. 175-181, ISBN 978-86-6335-074-8
  53. Amra Talić-Čikmiš, Mehmed Čobo, Zorica Djordjević, Formiranje tijela kvadratnog oblika procesom dubokog izvlačenja uz pomoć Solidworks i Ansys softvera, 12 th Research/Expert Conference with International Participation Quality 2021, Neum, B&H, 2021, 17 -19 June, ISBN 1512-9268
  54. Danijela NIKOLIĆ, Saša JOVANOVIĆ, Zorica DJORDJEVIĆ, Jasmina SKERLIĆ, Ana RADOJEVIĆ, GREEN BUILDING TECHNOLOGIES FOR SUSTAINABLE FUTURE, 10th International Scientific Conference - IRMES 2022 Research and Development of Mechanical Elements and Systems PROCEEDINGS Machine design in the context of Industry I4.0 – Intelligent products, Belgrade, Serbia, 2022, 26 May, pp. 269-276, ISBN 978-86-6060-119-5
  55. Đorđević Z., Jovanović S., Kostić S., Talić-Cikmis A., Nikolić D., MCDM approach in choosing the optimal composite shaft material - application of SAW method, Machine and Industrial Design in Mechanical Engineering, KOD 2021, Novi Sad, 2022, ISBN 978-3-030-88465-9
  56. Danijela Nikolića, Saša Jovanovića, Vanja Šušteršiča, Natalija Aleksića, Zorica Đorđevića,, Influence of solar fraction on photovoltaic generated energy at Serbian residential building, DEMI 2023 16th International Conference on Accomplishments in Mechanical and Industrial Engineerin, Banja Luka, 2023, 1-2 Jun, pp. 210-215
  57. Saša Jovanović , Jelena Petrović, Danijela Nikolić, Zorica Djordjević, Vanja Šušteršič Vanja Šušteršič, CLIMATE CHANGES - TRENDS AND PERSPECTIVES IN THE REPUBLIC OF SERBIA, 14. International Quality Conference, Kragujevac, 2023, May 24th – May 27th, pp. 1753-1760, ISBN 978-86-6335-104-2
  58. Danijela Nikolić, Minja Velemir Radović, Saša Jovanović, Zorica Djordjević, Energy analysis of serbian building with PV panels and different heating system, COMETa 2024, 7th international scientific conference, Jahorina, B&H, Republic of Srpska, 2024, 14th-16th november, pp. 463-471
  59. Danijela Nikolić, Saša Jovanović, Dajana Mikić, Zorica Đorđević, LIFE CYCLE ASSESMENT OF THE HAIR DRYER WITH ECO-it SOFTWARE, 31st International Conference Ecological Truth & Environmental Research – EcoTER'24, Sokobanja, Serbia, 2024, 18-21 June, pp. 701-707, ISBN 978-86-6305-152-2
  60. Danijela Nikolić, Saša Jovanović, Zorica Đorđević, Davor Končalović,Vladimir Vukašinović, GLOBAL WARMING – TREND ANALYSIS IN THE REPUBLIC OF SERBIA, 31st International Conference Ecological Truth & Environmental Research – EcoTER'24, Sokobanja, Serbia, 2024, 18-21 June, pp. 574-579, ISBN 978-86-6305-152-2
  61. Zorica Đorđević, Sonja Kostić, Saša Jovanović, Danijela Nikolić, THE INFLUENCE OF FIBER ORIENTATION ANGLE ON THE STABILITY OF A COMPOSITE DRIVE SHAFT, 10th International Congress Motor Vehicles & Motors 2024, Kragujevac, Serbia, 2024, 10-11 October, pp. 199-204, ISBN 978-86-6335-120-2
  62. Jovanovic, S., Savic, S., Jovicic, N., Boskovic, G., Djordjevic, Z., Using multi-criteria decision-making for selection of the optimal strategy for municipal solid waste management, ISWA WORLD CONGRESS 2016, Novi Sad, 2016, 19-21 September, pp. 1155, ISBN 978-86-7892-837-6
  63. Delic M., Djordjevic Z., Matejic M., Jovanovic S., CALCULATION OF STRESS STATE OF GEAR MADE OF COMPOSITE MATERIALS, 13 International Conference on Accomplishments th in Mechanical and Industrial Engineering, Banja Luka, 2017, 26-27 may, pp. 80, ISBN 978-99938-39-73-6
  64. Djordjevic Z., Jovanovic S., Stanojevic M., Blagojevic M., Velickovic S., OPTIMIZATION OF FIBER ORIENTATION ANGLE OF A HYBRID Al/COMPOSITE CARDAN SHAFT, 13 International Conference on Accomplishments th in Mechanical and Industrial Engineering, Banja Luka, 2017, 26-27 may, pp. 77, ISBN 978-99938-39-73-6
  65. Velickovic S., Djordjevic Z., Stojanovic B., Blagojevic J., Miladinovic S., Influence of angles of fiber orientation on improving the characteristics of composite cardan shaft using factorial experiment, The 10th International Conference on Machine and Industrial design in Mechanical Engineering KOD 2018, Novi Sad, 2018, 6-8 june, pp. 224-225, ISBN 978-86-6022-059-4
  66. S Veličković, B Stojanović, Z Djordjević, S Miladinović, J Blagojević, Effect of reinforcement on mechanical characteristics of A356 alloy nanocomposites, 9th International Scientific Conference Research and Development of Mechanical Elements and Systems, Kragujevac, 2019, 5-7 September, pp. 178-179, ISBN 978-86-6335-061-8
  67. Z Djordjevic, S Jovanovic, S Kostic, M Blagojevic, D Nikolic, Application of the multi-criteria decision making in the selection of materials of composite shaft, 9th International Scientific Conference Research and Development of Mechanical Elements and Systems, Kragujevac, 2019, 5-7 September, pp. 124-125, ISBN 978-86-6335-061-8
  68. Saša Jovanović, Zorica Djordjević, Sonja Kostić, Danijela Nikolić, Milan Đorđević, SELECTION OF SHAFT MATERIALS USING A MULTICRITERIA APPROACH, 9 th International Congress Motor Vehicles & Motors 2022, Kragujevac, Serbia, 2022, October 13th - 14th, pp. 37-38, ISBN 978-86-6335-096-0