FACULTY OF ENGINEERING KRAGUJEVAC
UNIVERSITY KRAGUJEVAC
CURRICULUM VITAE

GENERAL INFORMATION
First and last name
Year and place of birth
PositionFull professor
E-mail
Education-scientific / education–art field
University, faculty, organizational unit
Field and closer specialty

TECHNICAL BIOGRAPHY – POSITIONS
YearInstitutionPosition
1989Research & teaching аssistant prentice
1996Research & teaching assistant
2001Research & teaching assistant
2006Research & teaching assistant
2007Assistant professor
2012Associate professor
2016Full professor

PROFESSIONAL BIOGRAPHY - IMPROVEMENTS
YearInstitutionDuration
2012
2012
2012
2014TEMPUS DIAUSS, Development and Improvement of Automotive and Urban Engineering Studies in Serbia, JP 516729-2011, Torino, Italy5 days
2018Transilvania University of Brasov, Romania5 days
2018Faculty of Materials Science and Technology in Trnava, Slovakia5 days
2019Tallinn University of Technology, Estonia5 days

RESULTS OF SCIENTIFIC AND RESEARCH WORK
Papers published in international scientific journals
  1. Ivanovic, L., Devedzic, G., Cukovic, S., Miric, N., Modeling of the Meshing of Trochoidal Profiles With Clearances, Journal of Mechanical Design, Vol.134, No.4, pp. 041003-1 / 041003-9, ISSN 1050-0472, Doi 10.1115/1.4005621, 2012
  2. Ivanovic, L., Reduction of the maximum contact stresses by changing geometric parameters of the trochoidal gearing teeth profile, Meccanica, Vol.51, No.9, pp. 2243-2257, ISSN 0025-6455, Doi 10.1007/s11012-015-0356-0, 2016
  3. Miletić, I., Ilić A., Nikolić, R., Ulewicz, R., Ivanović, L., Sczygiol, N., Analysis of Selected Properties of Welded Joints of the HSLA Steels, Materials, impact factor: 3.057, Vol.13, No.6, pp. 1-12, ISSN 1996-1944, Doi 10.3390/ma13061301, 2020
  4. Ilić, A., Miletić, I., Nikolić, R., Marjanović, V., Ulewicz, R., Stojanović, B., Ivanović, L., Analysis of Influence of the Welding Procedure on Impact Toughness of Welded Joints of the High-Strength Low-Alloyed Steels, Applied Sciences, impact factor: 2.474, Vol.10, No.7, pp. 1-14, ISSN 2076-3417, Doi 10.3390/app10072205, 2020
  5. Gajević, S., Marković, A.,.Milojević, S.,.Ašonja, A., Ivanović, L., Stojanović, B., Multi-Objective Optimization of Tribological Characteristics for Aluminum Composite Using Taguchi Grey and TOPSIS Approaches, Lubricants, Vol.12, No.5, pp. 1-19, ISSN 2075-4442, Doi https://doi.org/10.3390/lubricants12050171, 2024
  6. Devedžić, G., Manić, M.,Tanikić, D., Ivanović, L., Mirić, N., Conceptual Framework for NPN Logic Based Decision Analysis, STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, Vol.56, No.6, pp. 402-408, ISSN 0039-2472, 2010
  7. Devedžić, G., Milošević, D., Ivanović, L., Adamović D., Manić, M., Reasoning With Linguistic Preferences Using NPN Logic, Computer Science and Information Systems – ComSIS, Vol.7, No.3, pp. 511-528, ISSN 1820-0214, Doi 10.2298/CSIS090223003D, 2010
    1820-02141003510D.pdf
  8. Ivanović, L., Devedžić, G., Mirić, N., Ćuković, S., Analysis of forces and moments in the gerotor pumps, Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science, Vol.1, No.1, pp. 1-13, ISSN 0954-4062, Doi 10.1243/09544062JMES2041, 2010
  9. Josifović, D., Ivanović, L., Ilić, A., Tribological aspects of contemporary gear materials, Journal of the Balkan Tribological Association, Vol.16, No.4, pp. 471-483, ISSN 1310-4772, 2010
    471-483.pdf
  10. Ivanović, L., Josifović, D., Ilić, A., Stojanović, B., Tribological aspect of the kinematical analysis at trochoidal gearing in contact, Journal of the Balkan Tribological Association, Vol.17, No.1, pp. 37-47, ISSN 1310-4772, 2011
    37-47.pdf
  11. Stojanović, B., Miloradović, N., Marjanović, N., Blagojević, M., Ivanović, L., Length Variation of Toothed Belt during Exploitation, Strojniški vestnik, Vol.57, No.x, pp. 1-7, ISSN 0039-2480, Doi 10.5545/sv-jme.2010.062, 2011
    02_2010_062_Stojanovic_04.pdf
  12. Stojanovic, B., Tanasijevic, S., Marjanovic, N., Ivanovic, L., Blagojevic, M., Wear as the Criterion of Mechanical Transmitters Working Life, Journal of the Balkan Tribological Association (JBTA), Vol.17, No.2, pp. 215-222, ISSN 1310-4772, 2011
    215-222.pdf
  13. Blagojević, M., Kočić, M., Marjanović, N., Stojanović, B., Đorđević, Z., Ivanović, L., Marjanović, V., Influence of the friction on the cycloidal speed reducer efficiency, Journal of the Balkan Tribological Association, Vol.18, No.2, pp. 217-227, ISSN 1310-4772, 2012
    217-227.pdf
  14. Stojanovic, B., Babic, M., Marjanovic, N., Ivanovic, L., Ilic, A., Tribomechanical Systems in Mechanical Power Transmitters, Journal of the Balkan Tribological Association, Vol.18, No.4, pp. 497-506, ISSN 1310-4772, 2012
    JBTA 497-506.pdf
  15. Ilić, A., Ivanović, L., Josifović, D., Savić, S., Rosić, B., Influence of Power Transmitter Dynamic Load on Physical and Chemical Properties of Used Lubricant, Journal of the Balkan Tribological Association (JBTA), Vol.19, No.1, pp. 106-116, ISSN 1310-4772, 2013
    JBTA-1-2013.pdf
  16. Ivanović, L., Josifović, D., Ilić, A., Stojanović, B., Analytical model of the pressure variation in the gerotor pump chambers, Technics Technologies Education Management / TTEM, Vol.8, No.1, pp. 323-331, ISSN 1840-1503, 2013
  17. Stojanovic, B., Ivanovic, L., TRIBOMECHANICAL SYSTEMS IN DESIGN, Journal of the Balkan Tribological Association, Vol.20, No.1, pp. 25-34, ISSN 1310-4772, 2014
    JBTA-1-2014.pdf
  18. Stojanović, B., Ivanović, L., APPLICATION OF ALUMINIUM HYBRID COMPOSITES IN AUTOMOTIVE INDUSTRY, Tehnički vjesnik, Vol.22, No.1, pp. 247-251, ISSN 1330-3651, Doi 10.17559/TV-20130905094303, 2015
    tv_22_2015_1_247_251.pdf
  19. Ivanović, L., Mačkić, T., Stojanović, B., ANALYSIS OF THE INSTANTANEOUS FRICTION COEFFICIENT OF THE TROCHOIDAL GEAR PAIR, Journal of the Balkan Tribological Association, Vol.22, No.1, pp. 281-293, ISSN 1310-4772, 2016
    JBTA-1-2016.pdf
  20. Stojanović, B., Babić, M., Ivanović, L., TAGUCHI OPTIMIZATION OF TRIBOLOGICAL PROPERTIES OF Al/SiC/GRAPHITE COMPOSITE, Journal of the Balkan tribological association, Vol.22, No.3, pp. 2582-2595, ISSN 1310-4772, 2016
  21. Ivanović, L., Stojanović, B., Blagojević, J., Bogdanović, G., Marinković, A., Analysis of the flow rate and the volumetric efficiency of the trochoidal pump by application of Taguchi method, Tehnički vjesnik, Vol.2, No.24, pp. 265-270, ISSN 1330-3651, Doi 10.17559/TV-20150429090420, 2017
  22. Ivanović, L., Marjanović, V., Ilić, A., Stojanović, B., Lazić, V., Correlations of mechanical properties and microstructure at specific zones of welded joint of high-strength low-alloy steels, Archives of Metallurgy and Materials, Vol.63, No.1, pp. 285-292, ISSN 2300-1909, Doi 10.24425/118939, 2018
  23. Tomović, R., Ivanović, L., Mačkić, T., Stojanović, B., Glišović, J., Prediction of oil film thickness in trochoidal pump, Transactions of the Canadian Society for Mechanical Engineering, impact factor: 23, Vol.45, No.3, pp. 374-385, ISSN 0315-8977, Doi 10.1139/tcsme-2020-0105, 2021
  24. Skulić, А., Milojević, S., Marić, О., lvanović, L., Кrstić, В., Radojković, М., Stojanović, В., The Impact of Lubricant Viscosity and Materials оn Power Losses and Efficiency of Worm Gearbox, Tehnički vjesnik, impact factor: 23, Vol.29, No.6, pp. 1853-1860, ISSN 1330-3651, Doi 10.17559/ТV 20220207092015, 2022
  25. Marković, A., Stojanovic, B., Komatina, N., Ivanović, L., Multi-attribute approach for selection of polymeric materials for manufacturing gears: A case study in the automotive industry, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol.238, No.22, pp. 10744-10755, ISSN 0954-4062, Doi 10.1177/09544062241271690, 2024
  26. Ivanovic, L., Velickovic, S., Stojanovic, B., Kandeva, M., Jakimovska, K., The Selection of Optimal Parameters of Gerotor Pump by Application of Factorial Experimental Design, FME Transactions, Vol.45, No.1, pp. 159-164, ISSN 1454-2092, Doi 10.5937/fmet1701159I, 2017
  27. Ivanović, L., Vencl, A., Stojanović, B., Marković, B., Biomimetics Design for Tribological Applications, Tribology in Industry, Vol.40, No.3, pp. 448-456, ISSN 0354-8996, Doi 10.24874/ti.2018.40.03.11, 2018
  28. Grujicic, R., Tica, M., Stojanovic, B., Ivanovic, L., Mitrovic, R., Tomovic, R., Analysis of Impact of Shaft Speed and External Load on the Radial Ball Bearing Lubrication Regimes, FME Transaction, impact factor: 24, Vol.50, No.1, pp. 109-120, ISSN 1451-2092, Doi 10.5937/fme2201109G, 2022
Papers presented at international conferences
  1. Josifovic, D., Ivanovic, L., Analysis and synthesis of external cycloidal spur gearing, Ninth World Congress on the Theory of Machines and Mechanisms, Milano, Italy, 1995, pp. 415-418
  2. Ivanovic, L., Josifovic, D., Geometrical Constraints in Cycloidal Teeth Synthesis, ISMM' 97, International Symposium "Machines and Mechanisms", Beograd, 1997
  3. Ivanović, L., Josifović, D., Devedžić, G., Computer generating of modified trochoidal profile of gerotor, 5th International Conference "Research and Development in Mechanical Industry" RaDMI 2005, Vrnjačka Banja, Serbia and Montenegro, 2005, pp. 617-624
  4. Ivanović, L., Josifović, D., Identification of the optimal geometrical parameters of the trochoidal gearing at the IC engines lubricating pumps, 8th International Conference and Exhibition IAT '07, Rogla, Slovenia, 2007, pp. 71-78
  5. Ilić, A., Ivanović, L., Josifović, D., Contemporary methods of nondestructive testing on mechanical construction, 9th International Conference Conference Research and Development in Mechanical Industry RaDMI 2009, Vrnjačka Banja, 2009, 16-19 septembar, pp. 218-225, ISBN 978-86-6075-007-7
  6. Ilić, A., Josifović, D., Ivanović, L., Experimental determination of dynamical characteristic of steering wheel joint shaft, 6th International Conference „KOD 2010”, Palić - Subotica, Serbia, 2010, 29-30 September, pp. 173-176, ISBN 978-86-7892-278-7
  7. Ilić, A., Ivanović, L. , Josifović, D., Jugović, Z., Stress Concentration at Welded Joins of Bucket-Wheel Excavator, The Seventh Triennial International Conference HEAVY MACHINERY - HM 2011, Kraljevo, Serbia, 2011, June 29th- July 2nd, pp. 55-60, ISBN 978-86-82631-58-3
  8. Ilić, A., Josifović, D., Ivanović, L., Savić, S., Influence of Power Transmitter Dynamic Load on Physical and Chemical Properties of Used Lubricant, 12th International Conference on Tribology – SERBIATRIB '11, Kragujevac, Serbia, 2011, 11-13 May, pp. 197-203, ISBN 978-86-86663-74-0
  9. Ilić, A., Josifović, D., Lazić, V., Ivanović, L., Mechanical Properties of Welded Joints at Steel Tubes with Square Cross Section, 34th International Conference on Production Engineering, Niš, 2011, 28- 30 September, pp. 465-468, ISBN 978-86-6055-019-6
  10. Ilić, A., Josifović, D., Lazić, V., Ivanović, L., Еxperimental determination of stress concentration influence on welded constructions stability, Тhe 7th international conference research and development of mechanical elements and systems IRMES 2011, Zlatibor, 2011, 27-28. april, pp. 219 – 224, ISBN 978-86-6055-012-7
  11. Ivanović, L., Josifović, D., Ilić, A., Contemporary Aspects of Solid Waste Management, 5th International Quality Conference, Kragujevac, Serbia, 2011, 20 May, pp. 175-183, ISBN 978-86-86663-68-9
  12. Ivanović, L., Josifović, D., Ilić, A., Stojanović, B., Specific Sliding of the Trochoidal Gearing at the Gerotor Pump, 12th International Conference on Tribology – SERBIATRIB '11, Kragujevac, Serbia, 2011, 11-13 May, pp. 250-256, ISBN 978-86-86663-74-0
    250-256.pdf
  13. Živković, K., Ivanović, L., Stojanović, B., The effect of geometry on the stress distribution of cross shaft, Тhe 7th international conference research and development of mechanical elements and systems IRMES 2011, Zlatibor, 2011, 27-28. april, pp. 245 – 252, ISBN 978-86-6055-012-7
  14. Aleksić, N., Erić, M., Ivanović, L., Tadić, B., Data Model for Creating Applications for Maintenance and Management of the Documentation, 6th International Quality Conference, Kragujevac, 2012, 8. June, pp. 971-976, ISBN 978-86-86663-82-5
    108.pdf
  15. Ilić A., Ivanović L., Josifović D., Lazić V., DESIGN OF THE MOTOR VEHICLES FROM THE ASPECT OF HIGH STRENGTH STEELS APPLICATIONS, International Congress Motor Vehicles & Motors 2012, Kragujevac, 2012, 3-5. 10., pp. 372-379, ISBN 978-86-86663-91-7
    MVM2012 Ilic.pdf
  16. Ilić, A., Ivanović, L., Josifović, D., Lazić, V., The methodology aspects for monitoring the machine elements, components and systems, COMETa 2012, Jahorina, B&H, 2012, 28-30 November, pp. 593-600, ISBN 978-99938-655-5-1
    75-Ilic.pdf
  17. Ilić, A., Ivanović, L., Josifović, D., Lazić, V., Advantages of High Strength Steels Applications in Mechanical Constructions, The 7th Internacional Symposium KOD 2012, Machine and Industrial Design in Mechanical Engineering, Balatonfüred, Hungary, 2012, 24 - 26 May, pp. 501-506, ISBN 978-86-7892-399-9
    Ilic-KOD2012.pdf
  18. Ilić, A., Ivanović, L., Josifović, D., Lazić, V., Application of High-Strength Steels in Vehicle Design, Innovative Automotive Technology – IAT 2012, Novo mesto/Dolenjske Toplice, 2012, 12 -13 April, pp. 51-58, ISBN 978-961-6536-61-5
    05_IlicA_IAT2012_Paper.pdf
  19. Ivanović, L., Ilić, A., Josifović, D., Živković, K., Effect of Geometrical Parameters Variation of the Cardan Joint Yoke on its Load Capacity, Innovative Automotive Technology – IAT 2012, Novo mesto/Dolenjske Toplice, 2012, 12 -13 April, pp. 59-67, ISBN 978-961-6536-61-5
    06_IvanovicL_IAT2012_Paper.pdf
  20. Ivanovic, L., Josifovic, D., Blagojevic, M., Stojanovic, B., Ilic, A., Determination of gerotor pump theoretical flow, COMETa 2012, Jahorina, B&H, 2012, 28-30 November, pp. 243-250, ISBN 978-99938-655-5-1
    30-Ivanovic.pdf
  21. Ivanovic, L., Josifovic, D., Rakic, B., Stojanovic, B., Ilic, A., THE INFLUENCE OF VARIATION IN POSITION OF OUTPUT SHAFT TO LOAD ON THE CARDAN JOINT CROSS SHAFT, International Congress Motor Vehicles & Motors 2012, Kragujevac, 2012, 3-5. 10., pp. 227-236, ISBN 978-86-86663-91-7
    MVM2012 Ivanovic.pdf
  22. Ivanović, L., Josifović, D., Rakić, B., Stojanović, B., Ilić, A., Shape Variations Influence on Load Capacity of Cardan Joint Cross Shaft, The 7th Internacional Symposium KOD 2012, Machine and Industrial Design in Mechanical Engineering, Balatonfüred, Hungary, 2012, 24 - 26 May, pp. 205-210, ISBN 978-86-7892-399-9
    Ivanovic-KOD2012.pdf
  23. Rakić, B., Beloica, N., Josifović, D., Ivanović, l., Ilić, A., Stress - strain analysis of hydraulic cylinder at excavator bucket mechanism, COMETa 2012, Jahorina, B&H, 2012, 28-30 November, pp. 235-242, ISBN 978-99938-655-5-1
    29-Rakic.pdf
  24. Ilić, A., Ivanović, l., Josifović, D., Lazić, V., Nikolić, R., Influence of Stress Concentration on Mechanical Properties of High Strength Low Alloyed Steel Grade, 18th International of PhD. students’ seminar SEMDOK 2013, University of Žilina, Žilina, Slovak Republic, 2013, 30 january - 1 february, pp. 31-34
  25. Ilic, A., Ivanovic, L., Josifovic, D., Lazic, V., Rakic, B., TESTING OF ELEMENTS AND JOINTS AT MECHANICAL CONSTRUCTIONS, 11 International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2013, Banja Luka, 2013, 30 May - 1 June, pp. 231-236, ISBN 978‐99938‐39‐46‐0
    25 TESTING OF ELEMENTS AND JOINTS AT MECHANICAL CONSTRUCTIONS.pdf
  26. Ivanovic, l., Ilic, A., Stojanovic, B., Zivkovic, K., THE INFLUENCE OF DESIGN MODIFICATIONS OF CARDAN SHAFT DRIVEN FORK ON ITS STRESS DISTRIBUTION, 7th International Quality Conference, Kragujevac, 2013, 23-25 May, pp. 441-446, ISBN 978-86-86663-94-8
    57.pdf
  27. Ivanovic, L., Josifovic, D., Ilic, A., Lazic, V., ECOLOGYCAL ASPECTS OF HIGH STRENGTH LOW ALLOYED STEELS AT MECHANICAL CONSTRUCTIONS, 7th International Quality Conference, Kragujevac, 2013, 23-25 May, pp. 435-440, ISBN 978-86-86663-94-8
    56.pdf
  28. Rakić, B., Ivanović, L., Josifović, D,, Ilić, A., NOISE AS FACTOR OF LIVING IN URBAN AREAS, III International Conference ECOLOGY OF URBAN AREAS 2013, Ečka -Zrenjanin, 2013, 11th October, pp. 442-449, ISBN 978-86-7672-210-5
  29. Rakić, B., Ivanović, L., Josifović, D., Ilić, A., STRESS-STRAIN ANALYSIS AT HYDRO ACCUMULATOR CYLINDER, Fourth Serbian (29th Yu) Congress on Theoretical and Applied Mechanics, Vrnjačka Banja, 2013, 4-7 June, pp. 407-412
    C20.pdf
  30. Saša Ćuković, Frieder Pankratz, Goran Devedžić, Gudrun Klinker, Vanja Luković, Lozica Ivanović, AN INTERACTIVE AUGMENTED REALITY PLATFORM FOR CAD EDUCATION, International Conference of Production Engeneering - [ICPE 2013], Kopaonik, 2013, 25-28. Septembar, pp. 353-358, ISBN 978-86-82631-69-9
  31. Stojanović, B., Ivanović, L., Ilić, A., Miletić, I., EXPERIMENTAL ANALYSIS OF TOOTH HEIGHT CHANGING AT TIMING BELTS, 13th International Conference on Tribology, SERBIATRIB `13, Kragujevac, 2013, 15 – 17 May, pp. 226-229, ISBN 978-86-86663-98-6
    226-229 Stojanovic.pdf
  32. Blagojevic, M., Ivanovic, L., Nikolic, A., Zivkovic, M., Zahar Djordjevic, M., QUALITY IMPROVEMENT OF ENGINEERING EDUCATION: DESIGN OF AN APPLICATION FOR LEARNING TECHNICAL DRAWING, 8th International Quality Conference, Kragujevac, Kragujevac, 2014, 23 May, pp. 863-868, ISBN 978 - 86 - 6335 - 004 - 5
  33. Ivanovic, L., Josifovic, D., Ilic, A., Stojanovic, B., Rakic, B., NOISE AS ASPECT OF LIFE QUALITY AT URBAN AREAS, 8th International Quality Conference, Kragujevac, 2014, 23 May, pp. 175-181, ISBN 978 - 86 - 6335 - 004 - 5
  34. Ivanovic, L., Josifovic, D., Ilic, A., Stojanovic, B., Zivkovic, K., OPTIMIZATION OF CARDAN JOINT DESIGN FROM LOAD CAPASITY ASPECT, International Congress Motor Vehicles & Motors 2014, Kragujevac, 2014, 9th-10th Oktober, pp. 396-404, ISBN 978-86-6335-010-6
  35. Ivanović, L., Rakić, B., Josifović, D., Ilić, A., Analysis of contact stresses at thohoidal gearing by numeric approach, The Eighth International Symposium Machine and Industrial Design in Mechanical Engineering, The Eighth International Symposium Machine and Industrial Design in Mechanical Engineering, KOD 2014, Balatonfüred, Hungary, 2014, 12-15 June, pp. 189-194, ISBN 978-86-7892-615-0
  36. Ivanović, L., Rakić, B., Josifović, D., Lazić, V., Influence of welding technology to mechanical properties of welding joints at high strength low alloy steels,, The Eighth International Symposium Machine and Industrial Design in Mechanical Engineering, KOD 2014, Balatonfüred, Hungary, 2014, 12-15 June, pp. 255-260, ISBN 978-86-7892-615-0
  37. Matejić, M., Ivanović, L., Petrović, N., ADOPTION OF OPTIMAL TEETH PARAMETERS OF GEROTOR PUMP, COMETa 2014 2nd International Scientific Conference, Jahorina, 2014, 2-5 december, pp. 505-512, ISBN 978-99938-655-5-1
  38. Matejić, M., Ivanović, L., Petrović, N., Kostić, N., Determination of the most influential factor during the rope winding process around winch drums using Taguchi method, 8th INTERNATIONAL CONFERENCE ON TRIBOLOGY, SINAIA, ROMANIA, 2014, 30thOct.-1stNov., pp. 794-798, ISBN 978-973-719-570-8
  39. Milojević, M., Ivanović, L., Dimitrijević, B., DESIGN AND ANALYSIS OF FORMULA STUDENT FRAME, 9th International Quality Conference, Kragujevac, Kragujevac, 2015, 05th June, pp. 547-552, ISBN 978-86-6335-015-1
  40. Garić, S., Ivanović, L., Stojanović, B., Miladinović, S., Milovanović, V., NUMERICAL ANALYSIS OF ALUMINUM COMPOSITE CYLINDRICAL GEARS, 3 rd INTERNATIONAL SCIENTIFIC CONFERENCE COMETa 2016, Jahorina, B&H, RS, 2016, 7 th – 9 th December, pp. 147-154, ISBN 978-99976-623-7-8
  41. Ivanović, L., Miladinović, S., Stojanović, B., Matejić, M., Application of magnetic transmission in automotive industry, International Congress Motor Vehicles & Motors 2016, Kragujevac, 2016, 6th-8th October, pp. 289-297, ISBN 978-86-6335-037-3
  42. Matejić, M., Ivanović, L., Kostić, N., PARAMETRIC MODELING OF GEROTOR PUMP, 3 rd INTERNATIONAL SCIENTIFIC CONFERENCE COMETa 2016, Jahorina, B&H, RS, 2016, 7 th – 9 th December, pp. 353-360, ISBN 978-99976-623-7-8
  43. Matejić, M., Matejić, M., Milićević, M., Ivanović, L., A NEW CONCEPT OF BICYCLE FRAME DESIGN, The Eighth International Symposium Machine and Industrial Design in Mechanical Engineering, KOD 2016, Balatonfüred, Hungary, 2016, 9-12 June, pp. 33-36, ISBN 978-86-7892-821-5
  44. Arsovski, S., Tadić, D., Ivanović, L., Cvetić, T., THE IMPACT OF PRODUCING DEVICES FOR RECYCLING ON THE ENVIRONMENT, 2nd International conference on Quality of Life, Kragujevac, 2017, 8 - 10 june, pp. 209-215, ISBN 978 - 86 - 6335 - 043 - 4
  45. Ilic, A., Ivanovic, L., Stojanovic, B., Josifovic, D., Desnica, E., Impact toughness of high-strength low-alloy steel welded joints, 8th INTERNATIONAL SCIENTIFIC CONFERENCE ”Research and development of mechanical elements and systems“ IRMES 2017, Trebinje, 2017, 7-9 September, pp. 247-252, ISBN 978-9940-527-53-2
  46. Ivanovic, L., Ilic, A., Stojanovic, B., Glisovic, J., Matejic, M., Influence of leakage clearance of pressure variation in gerotor pump chambers, 8th INTERNATIONAL SCIENTIFIC CONFERENCE ”Research and development of mechanical elements and systems“ IRMES 2017, Trebinje, 2017, 7-9 September, pp. 105-110, ISBN 978-9940-527-53-2
  47. Ivanović, L., Marković, B., Arsovski, S., Rackov, M., Kuzmanović, S., EMOTIONAL DESIGN AND QUALITY OF LIFE, 2nd International conference on Quality of Life, Kragujevac, 2017, 8 - 10 june, pp. 87-93, ISBN 978 - 86 - 6335 - 043 - 4
  48. Ivanovic, L., Vencl, A., Stojanovi,c B., Markovic, B., Biomimetics design for tribological applications, International Conference on Tribology – Serbiatrib ‘17, Kragujevac, 2017, 17 – 19 May, pp. 663-672, ISBN 978-86-6335-041-0
  49. Marković, B., Ivanović, L., Đurić, A., Product development process regarding to customer emotional needs, 8th INTERNATIONAL SCIENTIFIC CONFERENCE ”Research and development of mechanical elements and systems“ IRMES 2017, Trebinje, 2017, 7-9 September, pp. 149-152, ISBN 978-9940-527-53-2
  50. Miloradović, D., Bogdanović, G., Ivanović, L., Geroski, V., Rafailović, M.,, Comparison of numerical integration methods in the linear dynamic analysis, 13th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2017, Banja Luka, 2017, 26th-27th May, pp. 697-702, ISBN 978-99938-39-72-9
  51. Rackov, M., Kuzmanović, S., Čavić, M., Penčić, M., Knežević, I., Ivanović, L., Aspects of the Engineering Design Process, 17 International Scientific Conference of Industrial Systems - IS '17, Novi Sad, 2017, 4-6th October, pp. 344-349, ISBN ISBN 978-86-7892-978-6
  52. Ilić, A., Ivanović, L., Josifović, D. , Lazić, V., Živković, J., Effects of welding on mechanical and microstructural characteristics of high-strength low-alloy steel joints, The 10th International Symposium Machine and Industrial Design in Mechanical Engineering (KOD 2018), Novi Sad, 2018, 6th-8th June, pp. IOP Conf. Series: Materials Science and Engineering 393 (2018) 012020, ISBN doi:10.1088/1757-899X/393/1/012020
  53. Ivanović, L., Ilić, A., Miloradović, D., Matejić, M., Josifović, D., Modelling and simulation of the load in the epicyclic rotary pump with trochoidal gear profiles, The 10th International Symposium Machine and Industrial Design in Mechanical Engineering (KOD 2018), Novi Sad, 2018, 6th-8th June, pp. IOP Conf. Series: Materials Science and Engineering 393 (2018) 012049, ISBN doi: 10.1088/1757-899X/393/1/012049
  54. Ivanović, L., Ilić, A., Aleksić, A., Vulić, M., Improving the quality of innovative processes in the construction of ELV recycling equipment, 4 rd INTERNATIONAL SCIENTIFIC CONFERENCE COMETa 2018, Jahorina, B&H, RS, 2018, 27th– 30th November, pp. 544-551, ISBN 978-99976-719-4-3
  55. Ivanović, L., Matejić, M., FEM analysis of gerotor machines impeller with planetary motion, 4 rd INTERNATIONAL SCIENTIFIC CONFERENCE COMETa 2018, Jahorina, B&H, RS, 2018, 27th– 30th November, pp. 335-342, ISBN 978-99976-719-4-3
  56. Veličković, S., Stojanović, B., Ivanović, L., Miladinović, S., Milojević, S., Application of nanocomposites in the automotive industry, International Congress Motor Vehicles & Motors 2018, Kragujevac, 2018, 4th - 5th October, pp. 323-332, ISBN 978-86-6335-055-7
  57. Ilić, A., Ivanović, L., Lazić, V., Josifović, D., Welding method as influential factor of mechanical properties at high-strength low-alloyed steels, 9th International Scientific Conference - Research and Development of Mechanical Elements and Systems (IRMES 2019), Kragujevac, 2019, 5–7 September, pp. IOP Conf. Series: Materials Science and Engineering 659 (2019) 012036, ISBN doi:10.1088/1757-899X/659/1/012036
  58. Stryczek, J, Bednarczyk, S., Codina, E., Gamez-Montero, J., Ivanovic, L., Matejic, M., Gears or rotors - three approaches to design of working units of hydraulic machines, 9th International Scientific Conference - Research and Development of Mechanical Elements and Systems (IRMES 2019), Kragujevac, 2019, 5–7 September, pp. IOP Conf. Series: Materials Science and Engineering 659 (2019) 012006, ISBN doi: 10.1088/1757-899X/393/1/012049
  59. Vencl, A., Ivanović, L., Stojanović, B., Zadorozhnaya, E., Miladinović, S., Svoboda, P., Surface texturing for tribological applications: a review, 16th International Conference on Tribology, Serbiatrib '19, Kragujevac, 2019, 15 – 17 May, pp. 227-239
  60. Matejić, M., Ivanović, L., Stojanović, B., Modern systems in technical documentation workflow, Conference on Mechanical Engineering Technologies and Applications, COMETa2020, East Sarajevo, B&H, 2020, 26th-28th November, pp. 339-346, ISBN 978-99976-719-8-1
  61. Milosavljevic, D., Radakovic, A., Cukanovic, D., Bogdanovic, G., Ivanovic, L., Comparative Bending Analysis of Composite Laminate and Functionally Graded Plates Based on the New Shape Function, ICSSM 2021, 8th International Congress of the Serbian Society of Mechanics, Kragujevac, 2021, 28-30 June, pp. 80-89, ISBN 978-86-909973-8-1
  62. Matejic, M., Ivanovic, L., Matejic, M., Comparative Analysis of Rotation Welding Positioners Based on Friction Forces, Machine and Industrial Design in Mechanical Engineering. KOD 2021, Novi Sad, 2022, ISBN 978-3-030-88465-9
  63. Matejic, M., Matejic, M., Zivic, J., Ivanovic, L., DESIGN AND TESTING OF ABRASIVE BELT GRINDER, Conference on Mechanical Engineering Technologies and Applications, COMETa 2022, East Sarajevo, 2022, 17th -19th November, pp. 527-534, ISBN 978-99976-947-6-8
  64. Ivanović, L., Josifović, D., Application of trochoidal profile on the elements of rotational IC engines, Abstract, Mobility and Vehicles Mechanics, -, 1998, pp. 5
  65. Ivanović, L., Josifović, D., Methodology for selection of the optimal trochoidal gear tooth profile at the lubricating pumps, Sustainable development of automotive industry – International congress Motor vehicles & Motors, Kragujevac, Serbia, 2008, 8 – 10 October, pp. 23
  66. Josifović, D., Ivanović, L., Design of the new gear tooth profile of the trochoidal gearing, 1st Symposium on Multidisciplinary studies of Design in Mechanical Engineering, Bertinoro, Italy, 2008, 25 – 28 June, pp. 1 - 2
  67. Ivanović, L., Josifović, D., Ilić, A., Design of the gearing special forms, XXV International Conference of Geometry and Graphics moNGeometrija 2010, Belgrade, 2010, 24-27 June
  68. Blagojević, J., Mijatović, B., Kočović, D., Stojanović, B., Ivanović, L., Veličković, S., A review to cast polymer composite materials for interior environments, 9th International Scientific Conference - Research and Development of Mechanical Elements and Systems (IRMES 2019), Kragujevac, 2019, 5–7 September, pp. 182-183, ISBN 978‐86‐6335‐061‐8

TEXTBOOKS
  1. Ивановић Л., Descriptive Geometry and Technical Drawing - Practicum, Faculty of Engineering, University of Kragujevac, Крагујевац, 2018, ISBN 978-86-6335-051-9

JOURNAL EDITORIAL BOARD
  1. Editor-in-Chief of Advanced Engineering Letters, ISSN (Online): 2812-9709